Welded Lag Screw Eye Bolt
Welded Lag Screw Eye Bolt, in 3 sizes. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Welded Lag Screw Eye Bolt
- Material
- Mild steel
- Finish
- Zinc plated
Product description
Welded Lag Screw Eye Bolt for tension, lashing and fixing duty. Mild steel, zinc plated.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
3 sizes. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded & machining.
Choosing a size
Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Welded Lag Screw Eye Bolt |
| Sizes | 3 |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Zinc plated |
Shipping & lead time
Sizes & part numbers
3 sizes| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-EB-LSEBW-062X388 | 5/8″ × 3-7/8″ | 16.38 | 6.325 | 28.78 | 101.1 | 67.26 | 47.45 | 6.325 | 0.1 |
| IH-LR-EB-LSEBW-075X312 | 3/4″ × 3-1/8″ | 19.63 | 6.883 | 33.25 | 79.12 | 41 | 26.9 | 7.239 | 0.1 |
| IH-LR-EB-LSEBW-100X350 | 1″ × 3-1/2″ | 25.27 | 7.366 | 39.98 | 92.2 | 48.39 | 39.65 | 7.518 | 0.14 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the welded lag screw eye bolt come in?▾
Can it be used for lifting?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Shoulder Machinery Eye Bolt
Eye Nut — US Type
Regular Nut Eye Bolt, Hot-Dip Galvanized
Swing Eye Bolt — DIN 444
Shoulder Nut Eye Bolt, Hot-Dip Galvanized
Stainless Steel DIN 580 Eye Bolt
Stainless Steel DIN 582 Eye Nut
