Polyethylene Twisted Rope

Polyethylene twisted rope from 6 to 20 mm, laid in three or four strands from HDPE. Light, it floats and resists abrasion; easy to splice and inspect. Colour and packing to order.
Key features
- Product type: Polyethylene twisted rope
- Size range: 6–20 mm
- Working load limit: Load rating on request
- Size range
- 6–20 mm
- Material
- Polyethylene
Product description
A twisted polyethylene rope in diameters from 6 to 20 mm, laid in three or four strands from HDPE. It is a light, floating, abrasion-resistant rope for marine, fishing and general use.
At these diameters it is used for mooring small craft, buoy and float lines, tie-downs and general lashing.
Specification
- Material: HDPE (polyethylene)
- Size: 6–20 mm
- Construction: 3-strand or 4-strand twisted
- Packing: coil, hank, bundle, reel
- Colour: to order
Construction
A twisted (laid) rope is three or four strands twisted together. It is easy to splice and to inspect, because damage shows on the surface, and it stretches more than a braid of the same fibre. Under load a laid rope tends to unlay, so it can kink or hockle if it is twisted against its lay.
The fibre
- Polyethylene: specific gravity about 0.95 (floats), melts at about 135 °C.
Polypropylene floats and is economical; polyethylene is similar and resists abrasion; nylon stretches and absorbs shock; polyester stretches least and holds up best in sunlight.
Load rating
No load rating is published for this range. The maker gives a size range but no breaking loads. Tell us the diameter and the duty and we will confirm the breaking load with the quotation, with a test certificate if you need one. Do not use it to lift until you have that rating in writing.
Ordering
Send the fibre, diameter, construction, colour and length you need, with any standard the rope must meet, and we will confirm the specification and lead time on the quotation.
See the fibre rope and twine range for ropes with published breaking loads.
Identification
| Parameter | Value |
|---|---|
| Product type | Polyethylene twisted rope |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6–20 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Polyethylene |
| Construction | 3-strand or 4-strand twisted |
| Specific gravity | 0.95 — floats |
| Melting point | About 135 °C |
Performance
| Parameter | Value |
|---|---|
| Working load limit | Load rating on request |
| Minimum breaking load | Not published — confirmed on quotation |
Commercial
| Parameter | Value |
|---|---|
| Packing | Coil, hank, bundle, reel |
| Colour | To order |
Shipping & lead time
What is the Polyethylene Twisted Rope and what is it used for?▾
What is the Indus part number for the Polyethylene Twisted Rope?▾
What sizes does the Polyethylene Twisted Rope come in?▾
How is the Polyethylene Twisted Rope constructed?▾
What load rating does the Polyethylene Twisted Rope have?▾
What is the Polyethylene Twisted Rope made from and does it float?▾
Does the Polyethylene Twisted Rope come with a certificate or standard?▾
How should the Polyethylene Twisted Rope be used safely?▾
Where is the Polyethylene Twisted Rope used?▾
How does the Polyethylene Twisted Rope differ from the Coloured Polyethylene Rope?▾
Do you stock the Polyethylene Twisted Rope in Dubai?▾
What do I send to order the Polyethylene Twisted Rope?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Fibre rope materials compared: polypropylene, polyethylene, polyester, nylon and HMPE
At the same diameter, an HMPE rope on our listings breaks at about four times the load of a polyolefin or nylon rope. How the five fibre rope materials differ in strength, stretch, buoyancy and weathering, and how to read an ISO or MEG4 breaking load.
5 min read
Lifting & rigging
Types of mooring bollards: ship double bollards, cross bollards, dock bollards and cleats
A bollard on a ship's deck and a bollard on a quay do the same job under different rules. The bollard types we list — double, cross, T-head, stag horn, bitts and cleats — how they are rated, and what to check before fitting one.
6 min read
Lifting & rigging
Steel erection rigging equipment: slings, shackles, clamps and tag lines for steelwork
Erecting structural steel means hundreds of lifts of awkward, heavy, edge-sharp members, often at height and in wind. The rigging kit a steel erection crew needs — chain slings, shackles, beam and plate clamps, lifting points, tag lines — how to choose each, and the rules that apply to multiple lifts, clamps and tag lines.
4 min read








