Multi-Configuration Modular Lifting Beam — 16 t Beam, 23 t Semi-Spreader

A modular lifting beam built from standard sections and adaptors that rigs as a lifting beam or under beam to 16 t, a semi-spreader to 23 t, or an H-frame. One kit for a hire fleet or a site that meets a different lift every week.
Key features
- Product type: Modular lifting beam (multi-configuration)
- Pattern / standard: EN 13155
- Size range: Span 1–10 m; H-frame cross beam 1–4 m
- Working load limit: Lifting beam 16 t; semi-spreader 23 t; H-frame 16 t
- Product type
- Modular lifting beam (multi-configuration)
- Material
- Steel, bolted standard sections and adaptors
Product description
One beam system, several lifting tools. Standard sections bolt together to length, and adaptors turn the assembly into a lifting beam hung from a central top point, an under beam that hangs below the hook block, a semi-spreader with two top lugs, or an H-frame with a cross beam. When the lift changes, the beam is reconfigured on site rather than replaced.
Load tables
The size table lists every configuration and span in the user instructions with its rated load. For a semi-spreader the load shares across two, three or four bottom points, and the rating rises with the number of points. For an H-frame the span reads primary beam × cross beam, from two charts: a single top lug, or two top lugs set at half the primary span.
| Configuration | Span | WLL |
|---|---|---|
| Lifting beam or under beam | 1–3 m | 16 t |
| Lifting beam or under beam | 10 m | 2 t |
| Semi-spreader, 4 bottom points | 4–6 m | 23 t |
| Semi-spreader, 2 bottom points | 10 m | 5 t |
| H-frame, two top lugs | 1 m × 1 m | 16 t |
Section weights
| Component | Self weight |
|---|---|
| 1 m section | 180 kg |
| 2 m section | 250 kg |
| 4 m section | 425 kg |
| Under-beam adaptor | 31 kg |
Rigging notes
- Lifting beam spans of 1–3 m use 9.5 t super-bow bottom shackles; 6.5 t standard bow shackles from 4 m.
- Under beam: an 8.5 t shackle at the central bolt hole, or 17 t at the bolt-on lugs.
- Semi-spreader: the top lugs sit at half the total span; ratings above 13 t need super-bow shackles.
- H-frame, single top lug: one 17 t top shackle.
Other configurations
Adaptors also make counterweight beams, fork-pocket beams and low-height lifting frames. Tell us the lift and we will confirm whether the beam can be configured for it and at what rating.
Ordering
Quote the part number of the configuration and span, or send the load, its lifting points and your headroom.
Identification
| Parameter | Value |
|---|---|
| Product type | Modular lifting beam (multi-configuration) |
| Pattern / standard | EN 13155 |
| Sizes | 95 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | Lifting beam 16 t; semi-spreader 23 t; H-frame 16 t |
| Configurations | Lifting beam, under beam, semi-spreader, H-frame |
Dimensions
| Parameter | Value |
|---|---|
| Size range | Span 1–10 m; H-frame cross beam 1–4 m |
| Section lengths | 1 m, 2 m and 4 m |
Construction
| Parameter | Value |
|---|---|
| Material | Steel, bolted standard sections and adaptors |
Compliance
| Parameter | Value |
|---|---|
| Certification | Declaration of conformity; user instructions with load tables |
Shipping & lead time
Sizes & part numbers
95 sizes- Indus part no.IH-LR-BH-MCB-16-LB-010
- Configuration
- Lifting beam, central top point
- Span
- 1 m
- WLL (t)
- 16
- Indus part no.IH-LR-BH-MCB-16-UB-010
- Configuration
- Under beam
- Span
- 1 m
- WLL (t)
- 16
- Indus part no.IH-LR-BH-MCB-16-LB-020
- Configuration
- Lifting beam, central top point
- Span
- 2 m
- WLL (t)
- 16
- Indus part no.IH-LR-BH-MCB-16-UB-020
- Configuration
- Under beam
- Span
- 2 m
- WLL (t)
- 16
- Indus part no.IH-LR-BH-MCB-16-LB-030
- Configuration
- Lifting beam, central top point
- Span
- 3 m
- WLL (t)
- 16
- Indus part no.IH-LR-BH-MCB-16-UB-030
- Configuration
- Under beam
- Span
- 3 m
- WLL (t)
- 16
- Indus part no.IH-LR-BH-MCB-16-LB-040
- Configuration
- Lifting beam, central top point
- Span
- 4 m
- WLL (t)
- 13
- Indus part no.IH-LR-BH-MCB-16-UB-040
- Configuration
- Under beam
- Span
- 4 m
- WLL (t)
- 13
Show all 95 sizesShow fewer sizes
Configuration — How the beam is assembled and rigged for this row, as the load chart names it. Span — Distance between the lifting points the load hangs from, as the load chart prints it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Multi-Configuration Modular Lifting Beam?▾
How do I read the part number IH-LR-BH-MCB-16-LB-010?▾
What spans and configurations does the modular lifting beam cover?▾
What is the rated load of the modular lifting beam at different spans?▾
How does the number of bottom points change the semi-spreader rating?▾
How heavy are the sections and adaptors of the modular beam?▾
What standard and documents come with the modular lifting beam?▾
What shackles does the modular lifting beam use?▾
How are modular lifting beams inspected in service?▾
Can the modular lifting beam be set up for other lifts?▾
Modular lifting beam or a fixed made-to-order beam?▾
Is the modular lifting beam available to order from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Spreader beam vs lifting beam: how each carries the load, and how to choose
A lifting beam hangs from one top point and carries the load in bending. A spreader beam hangs from two top slings and only holds them apart, in compression. That one difference decides the weight of the beam, the headroom it needs and the loads it suits.
7 min read
Lifting & rigging
Centre of gravity in lifting: load share, tilt and why lifting points belong above it
A suspended load turns until its centre of gravity hangs directly under the hook. That one rule tells you how much each sling leg carries, how far a load will tilt, and why lifting from below the centre of gravity can roll a load over. With worked numbers and what it means for spreader beams.
8 min read







