Swing Eye Bolt — DIN 444

Swing Eye Bolt (DIN 444), in 17 sizes. Load rating on request. Indus part numbers.
Key features
- Product type: Swing Eye Bolt
- Pattern / standard: DIN 444
- Material
- Carbon steel
- Finish
- Zinc plated
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Made to DIN 444. Carbon steel, zinc plated.
Sizes
17 sizes. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged & machining.
Choosing a size
Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Swing Eye Bolt |
| Pattern / standard | DIN 444 |
| Sizes | 17 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Zinc plated |
Shipping & lead time
Sizes & part numbers
17 sizes- Indus part no.IH-LR-EB-SEBD444-M5
- Size
- M5
- Pitch (mm)
- 0.8
- M (mm)
- 5
- b (mm)
- 16
- d1 (mm)
- 5.03
- dk (mm)
- 12
- s (mm)
- 8
- Indus part no.IH-LR-EB-SEBD444-M6
- Size
- M6
- Pitch (mm)
- 1
- M (mm)
- 6
- b (mm)
- 18
- d1 (mm)
- 6.03
- dk (mm)
- 14
- s (mm)
- 9
- Indus part no.IH-LR-EB-SEBD444-M8
- Size
- M8
- Pitch (mm)
- 1.25
- M (mm)
- 8
- b (mm)
- 22
- d1 (mm)
- 8.036
- dk (mm)
- 18
- s (mm)
- 11
- Indus part no.IH-LR-EB-SEBD444-M10
- Size
- M10
- Pitch (mm)
- 1.5
- M (mm)
- 10
- b (mm)
- 26
- d1 (mm)
- 10.04
- dk (mm)
- 20
- s (mm)
- 14
- Indus part no.IH-LR-EB-SEBD444-M12
- Size
- M12
- Pitch (mm)
- 1.75
- M (mm)
- 12
- b (mm)
- 30
- d1 (mm)
- 12.04
- dk (mm)
- 25
- s (mm)
- 17
- Indus part no.IH-LR-EB-SEBD444-M16
- Size
- M16
- Pitch (mm)
- 2
- M (mm)
- 16
- b (mm)
- 38
- d1 (mm)
- 16.04
- dk (mm)
- 32
- s (mm)
- 19
- Indus part no.IH-LR-EB-SEBD444-M20
- Size
- M20
- Pitch (mm)
- 2.5
- M (mm)
- 18
- b (mm)
- 46
- d1 (mm)
- 18.04
- dk (mm)
- 40
- s (mm)
- 24
- Indus part no.IH-LR-EB-SEBD444-M24
- Size
- M24
- Pitch (mm)
- 3
- M (mm)
- 22
- b (mm)
- 54
- d1 (mm)
- 22.05
- dk (mm)
- 45
- s (mm)
- 28
Show all 17 sizesShow fewer sizes
- Indus part no.IH-LR-EB-SEBD444-M27
- Size
- M27
- Pitch (mm)
- 3
- M (mm)
- 24
- b (mm)
- 60
- d1 (mm)
- 24.05
- dk (mm)
- 50
- s (mm)
- 30
- Indus part no.IH-LR-EB-SEBD444-M27-2
- Size
- M27
- Pitch (mm)
- 3
- M (mm)
- 25
- b (mm)
- 60
- d1 (mm)
- 25.05
- dk (mm)
- 50
- s (mm)
- 30
- Indus part no.IH-LR-EB-SEBD444-M30
- Size
- M30
- Pitch (mm)
- 3.5
- M (mm)
- 27
- b (mm)
- 66
- d1 (mm)
- 27.05
- dk (mm)
- 55
- s (mm)
- 34
- Indus part no.IH-LR-EB-SEBD444-M30-2
- Size
- M30
- Pitch (mm)
- 3.5
- M (mm)
- 28
- b (mm)
- 66
- d1 (mm)
- 28.05
- dk (mm)
- 55
- s (mm)
- 34
- Indus part no.IH-LR-EB-SEBD444-X
- Size
- (M33)
- Pitch (mm)
- 3.5
- M (mm)
- 30
- b (mm)
- —
- d1 (mm)
- 30.05
- dk (mm)
- 60
- s (mm)
- 38
- Indus part no.IH-LR-EB-SEBD444-M36
- Size
- M36
- Pitch (mm)
- 4
- M (mm)
- 32
- b (mm)
- —
- d1 (mm)
- 32.06
- dk (mm)
- 65
- s (mm)
- 41
- Indus part no.IH-LR-EB-SEBD444-M36-2
- Size
- M36
- Pitch (mm)
- 4
- M (mm)
- 33
- b (mm)
- —
- d1 (mm)
- 33.06
- dk (mm)
- 65
- s (mm)
- 41
- Indus part no.IH-LR-EB-SEBD444-X-2
- Size
- (M39)
- Pitch (mm)
- 4
- M (mm)
- 35
- b (mm)
- —
- d1 (mm)
- 35.06
- dk (mm)
- 70
- s (mm)
- 46
- Indus part no.IH-LR-EB-SEBD444-X-3
- Size
- (M39)
- Pitch (mm)
- 4
- M (mm)
- 36
- b (mm)
- —
- d1 (mm)
- 36.06
- dk (mm)
- 70
- s (mm)
- 46
Size — Nominal size as the manufacturer states it. Pitch — Thread pitch or link pitch, as the source heads it. M — Dimension M on the manufacturer dimension drawing. b — Dimension b on the manufacturer dimension drawing. d1 — Dimension d1 on the manufacturer dimension drawing. dk — Dimension dk on the manufacturer dimension drawing. s — Dimension s on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Swing Eye Bolt — DIN 444 and what is it used for?▾
How are the Indus part numbers for the Swing Eye Bolt — DIN 444 structured?▾
What sizes does the Swing Eye Bolt — DIN 444 come in?▾
How do I choose the right size of Swing Eye Bolt — DIN 444?▾
What is the working load limit of the Swing Eye Bolt — DIN 444?▾
What is the Swing Eye Bolt — DIN 444 made from?▾
Does the Swing Eye Bolt — DIN 444 come with a test certificate?▾
What should the Swing Eye Bolt — DIN 444 be used with?▾
How should the Swing Eye Bolt — DIN 444 be inspected and used safely?▾
Where is the Swing Eye Bolt — DIN 444 typically used?▾
How does the Swing Eye Bolt — DIN 444 differ from the Stainless Steel Swing Eye Bolt — DIN 444?▾
Do you stock the Swing Eye Bolt — DIN 444 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Eye bolt types and angled loads: plain, shoulder and DIN 580 collar eye bolts
A plain eye bolt is rated for a straight pull only. A shoulder eye bolt pulled at 45° keeps 30% of its rating. A DIN 580 collar eye bolt has its own table for angled loads and none at all for a pull across the eye. Here is how each type is rated, fitted and derated.
8 min read
Rigging capacity charts
Eye bolt capacity chart: DIN 580, BS 4278, JIS and US eye bolts by thread size
Eye bolt working load limits by thread: DIN 580 and DIN 582 from M8 to M100 with angled ratings, BS 4278 and JIS B 1168 collar eye bolts, US shoulder and machinery eye bolts at 0°, 15°, 30°, 45° and 90°, and eye nuts — with the fitting rules every rating assumes.
7 min read
Lifting & rigging
Lifting points compared: weld-on pad eyes, bolt-on and swivel lifting points, and eye bolts
A weld-on lifting point is only as good as its weld. A bolt-on point is only as good as its thread engagement and torque. A swivel point turns to face the sling, but not every one keeps its full rating sideways. Here is how the four kinds of lifting point compare, and what each needs to be fitted properly.
6 min read








