Grade 80 Welded Alloy Master Link — Single Pull Rated

Grade 80 Welded Alloy Master Link, in 9 sizes, 1/2″ to 2″, WLL 7,000 to 102,600 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Welded Alloy Master Link
- Pattern / standard: Grade 80
- Size range: 1/2″ to 2″
- Working load limit: 7,000 to 102,600 lbs
- Size range
- 1/2″ to 2″
- Working load limit
- 7,000 to 102,600 lbs
- Material
- Alloy steel (Grade 80)
Product description
Grade 80 alloy fittings for building and repairing Grade 80 chain slings. Alloy steel (Grade 80).
Sizes and ratings
9 sizes, 1/2″ to 2″. Working load limit 7,000 to 102,600 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Minimum ultimate load is 5 times the working load limit (a 5:1 design factor).
Choosing a size
Match the fitting to the chain size and grade, and select on WLL. A sling is rated by its weakest component.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Welded Alloy Master Link |
| Pattern / standard | Grade 80 |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/2″ to 2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 7,000 to 102,600 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel (Grade 80) |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-LR-G8-WAML-050
- Size
- 1/2″
- WLL (lbs)
- 7,000
- Proof load (lbs)
- 14,000
- Inside length (mm)
- 127
- Inside width (mm)
- 63.5
- Weight (lbs)
- 0.89
- Indus part no.IH-LR-G8-WAML-062
- Size
- 5/8″
- WLL (lbs)
- 9,000
- Proof load (lbs)
- 18,000
- Inside length (mm)
- 152.4
- Inside width (mm)
- 76.2
- Weight (lbs)
- 1.63
- Indus part no.IH-LR-G8-WAML-075
- Size
- 3/4″
- WLL (lbs)
- 12,300
- Proof load (lbs)
- 28,400
- Inside length (mm)
- 139.7
- Inside width (mm)
- 69.8
- Weight (lbs)
- 2.25
- Indus part no.IH-LR-G8-WAML-088
- Size
- 7/8″
- WLL (lbs)
- 15,000
- Proof load (lbs)
- 30,000
- Inside length (mm)
- 177.8
- Inside width (mm)
- 88.9
- Weight (lbs)
- 3.53
- Indus part no.IH-LR-G8-WAML-100
- Size
- 1″
- WLL (lbs)
- 24,300
- Proof load (lbs)
- 48,700
- Inside length (mm)
- 177.8
- Inside width (mm)
- 88.9
- Weight (lbs)
- 5
- Indus part no.IH-LR-G8-WAML-125
- Size
- 1-1/4″
- WLL (lbs)
- 36,200
- Proof load (lbs)
- 72,400
- Inside length (mm)
- 222.2
- Inside width (mm)
- 111.1
- Weight (lbs)
- 9.75
- Indus part no.IH-LR-G8-WAML-150
- Size
- 1-1/2″
- WLL (lbs)
- 54,300
- Proof load (lbs)
- 112,200
- Inside length (mm)
- 266.7
- Inside width (mm)
- 133.3
- Weight (lbs)
- 17.12
- Indus part no.IH-LR-G8-WAML-175
- Size
- 1-3/4″
- WLL (lbs)
- 84,900
- Proof load (lbs)
- 169,800
- Inside length (mm)
- 304.8
- Inside width (mm)
- 152.4
- Weight (lbs)
- 26.12
Show all 9 sizesShow fewer sizes
- Indus part no.IH-LR-G8-WAML-200
- Size
- 2″
- WLL (lbs)
- 102,000
- Proof load (lbs)
- 205,200
- Inside length (mm)
- 355.6
- Inside width (mm)
- 177.8
- Weight (lbs)
- 38
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Inside length — Inside length of the link or bow. Inside width — Inside width of the link or jaw. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Grade 80 Welded Alloy Master Link — Single Pull Rated and what is it used for?▾
How are the Indus part numbers for the Grade 80 Welded Alloy Master Link — Single Pull Rated structured?▾
What sizes does the Grade 80 Welded Alloy Master Link — Single Pull Rated come in?▾
How do I choose the right size of Grade 80 Welded Alloy Master Link — Single Pull Rated?▾
What is the working load limit of the Grade 80 Welded Alloy Master Link — Single Pull Rated?▾
What is the Grade 80 Welded Alloy Master Link — Single Pull Rated made from?▾
Does the Grade 80 Welded Alloy Master Link — Single Pull Rated come with a test certificate?▾
What should the Grade 80 Welded Alloy Master Link — Single Pull Rated be used with?▾
How should the Grade 80 Welded Alloy Master Link — Single Pull Rated be inspected and used safely?▾
Where is the Grade 80 Welded Alloy Master Link — Single Pull Rated typically used?▾
How does the Grade 80 Welded Alloy Master Link — Single Pull Rated differ from the Grade 80 Welded Master Link — 4:1 and 5:1 Rated?▾
Do you stock the Grade 80 Welded Alloy Master Link — Single Pull Rated in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Master links explained: single links, assemblies with sub-links, and sizing to the hook
The master link is the top of a multi-leg sling: it gathers the legs and sits in the crane hook. Two legs can share a single master link; three or four need an assembly with sub-links. And the link has to fit the hook as well as the chain. Here is how to choose one.
5 min read
Lifting & rigging
Hammerlocks, clevis fittings and connecting links: joining chain sling components
Every chain sling joins chain to a master link and a hook somewhere. A hammerlock-type connecting link does it with two halves and a pin; a clevis fitting takes the chain straight onto its pin; an eye fitting needs a link to join it. What each joint is, how they are rated, and the look-alike links that must never be used for lifting.
6 min read
Lifting & rigging
Lifting hook types: eye, clevis and swivel hooks, sling vs grab hooks, and latches
Hooks are chosen on two things: how they attach (eye, clevis, shank or swivel) and what they do (a sling or slip hook holds a load in its bowl; a grab hook grips a chain link). Use a grab hook to shorten a chain and the sling loses 20% unless the hook is a cradle type. Here is how the types differ, and when a hook comes out of service.
6 min read








