Snatch Block with Swivel Hook — Metric, 0.5 to 5 t, 0.5–5 t WLL

Snatch Block with Swivel Hook, metric, 5 sizes, 0.5 t to 5 t, for wire rope 6 to 18 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Snatch block, single sheave, swivel hook
- Pattern / standard: Metric snatch block; ASME B30.26 as a reference for rigging blocks
- Size range: 0.5 t to 5 t; wire rope 6 to 18 mm
- Working load limit: 0.5 to 5 t
- Size range
- 0.5 t to 5 t; wire rope 6 to 18 mm
- Working load limit
- 0.5 to 5 t
- Material
- Steel side plates, forged swivel hook with latch
- Finish
- Painted
Product description
Single-sheave snatch block for steel wire rope, with a hinged side plate that opens so the rope can be laid in over the sheave without threading the end, and a forged swivel hook with a safety latch. Five capacities from 0.5 t to 5 t, each matched to a wire rope diameter range.
Sizes and ratings
5 sizes, 0.5 t to 5 t. Working load limit 0.5 to 5 t. Every size has its own Indus part number in the table below, with the wire rope diameters it takes. The lettered dimensions refer to the dimension drawing in the gallery.
Choosing a size
Choose by working load limit and by the rope diameter. The load on a snatch block is not the load on the rope: when the rope turns through the block, the block carries the resultant of both rope parts, up to twice the line pull at a 180° turn. Size the block for that resultant, and keep the side plate closed and locked before the rope is loaded.
Ordering
Quote the Indus part number from the size table, or send the load and the rope diameter. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Snatch block, single sheave, swivel hook |
| Pattern / standard | Metric snatch block; ASME B30.26 as a reference for rigging blocks |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 0.5 t to 5 t; wire rope 6 to 18 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.5 to 5 t |
Construction
| Parameter | Value |
|---|---|
| Material | Steel side plates, forged swivel hook with latch |
| Finish | Painted |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-LR-BP-SBSWH-0P5T
- Size
- 0.5 t
- Rope size
- 6–8 mm
- WLL (t)
- 0.5
- A (mm)
- 255
- B (mm)
- 95
- C (mm)
- 61
- D (mm)
- 27
- E (mm)
- 23
- F (mm)
- 30
- Indus part no.IH-LR-BP-SBSWH-1T
- Size
- 1 t
- Rope size
- 8–11 mm
- WLL (t)
- 1
- A (mm)
- 320
- B (mm)
- 120
- C (mm)
- 68
- D (mm)
- 35
- E (mm)
- 33
- F (mm)
- 33
- Indus part no.IH-LR-BP-SBSWH-2T
- Size
- 2 t
- Rope size
- 11–14 mm
- WLL (t)
- 2
- A (mm)
- 385
- B (mm)
- 150
- C (mm)
- 85
- D (mm)
- 44
- E (mm)
- 40
- F (mm)
- 37
- Indus part no.IH-LR-BP-SBSWH-3P2T
- Size
- 3.2 t
- Rope size
- 12–15 mm
- WLL (t)
- 3.2
- A (mm)
- 475
- B (mm)
- 180
- C (mm)
- 92
- D (mm)
- 54
- E (mm)
- 45
- F (mm)
- 47
- Indus part no.IH-LR-BP-SBSWH-5T
- Size
- 5 t
- Rope size
- 15–18 mm
- WLL (t)
- 5
- A (mm)
- 580
- B (mm)
- 215
- C (mm)
- 110
- D (mm)
- 63
- E (mm)
- 53
- F (mm)
- 55
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t used for?▾
Which sizes of Snatch Block with Swivel Hook — Metric, 0.5 to 5 t are available?▾
How do I choose the right size of Snatch Block with Swivel Hook — Metric, 0.5 to 5 t?▾
What is the working load limit of the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t?▾
What part number do I quote for the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t?▾
How does the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t compare with the Snatch Block with Hook?▾
What is the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t made of?▾
What standard and certificate come with the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t?▾
What can the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t be connected to?▾
How do I inspect the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t before use?▾
What are the typical applications of the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t?▾
Can I buy the Snatch Block with Swivel Hook — Metric, 0.5 to 5 t from Indus ex-stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read







