Stainless Steel Dome Head Terminal — 3–10 mm

Stainless Steel Dome Head Terminal (European type), in 6 sizes, 3 mm to 10 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Dome Head Terminal
- Pattern / standard: European type
- Size range: 3 mm to 10 mm
- Size range
- 3 mm to 10 mm
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Spelter sockets and swage or swageless terminals that end a wire rope in an eye, jaw, fork or stud. Built to the European pattern. Type 304 or type 316 stainless steel, polished.
Sizes
6 sizes, 3 mm to 10 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Machining.
Choosing a size
Match the terminal to the rope diameter and construction, and fit it with the method it is made for — poured, pressed or hand-assembled.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Dome Head Terminal |
| Pattern / standard | European type |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 mm to 10 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-ST-SSDHT-3MM
- Size
- 3 mm
- Rope size
- 3 mm
- L1 (mm)
- 35
- L2 (mm)
- 25
- D2 (mm)
- 5.5
- D3 (mm)
- 8
- L3 (mm)
- 32
- Indus part no.IH-LR-ST-SSDHT-4MM
- Size
- 4 mm
- Rope size
- 4 mm
- L1 (mm)
- 35
- L2 (mm)
- 25
- D2 (mm)
- 6.35
- D3 (mm)
- 10
- L3 (mm)
- 32
- Indus part no.IH-LR-ST-SSDHT-5MM
- Size
- 5 mm
- Rope size
- 5 mm
- L1 (mm)
- 41
- L2 (mm)
- 30
- D2 (mm)
- 7.5
- D3 (mm)
- 11.5
- L3 (mm)
- 47
- Indus part no.IH-LR-ST-SSDHT-6MM
- Size
- 6 mm
- Rope size
- 6 mm
- L1 (mm)
- 52
- L2 (mm)
- 40
- D2 (mm)
- 9
- D3 (mm)
- 14
- L3 (mm)
- 47
- Indus part no.IH-LR-ST-SSDHT-8MM
- Size
- 8 mm
- Rope size
- 8 mm
- L1 (mm)
- 66
- L2 (mm)
- 50
- D2 (mm)
- 12.58
- D3 (mm)
- 18
- L3 (mm)
- 60
- Indus part no.IH-LR-ST-SSDHT-10MM
- Size
- 10 mm
- Rope size
- 10 mm
- L1 (mm)
- 77
- L2 (mm)
- 60
- D2 (mm)
- 16
- D3 (mm)
- 22
- L3 (mm)
- 70
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. D3 — Dimension D3 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Dome Head Terminal and where is it used?▾
How do I read Stainless Steel Dome Head Terminal part numbers such as IH-LR-ST-SSDHT-3MM?▾
What size range does the Stainless Steel Dome Head Terminal cover?▾
How do I choose the right size of Stainless Steel Dome Head Terminal?▾
What load rating does the Stainless Steel Dome Head Terminal carry?▾
What is the Stainless Steel Dome Head Terminal made from and how is it finished?▾
Does the Stainless Steel Dome Head Terminal come with a test certificate?▾
What do I use with the Stainless Steel Dome Head Terminal?▾
How should the Stainless Steel Dome Head Terminal be fitted and inspected?▾
How does the Stainless Steel Dome Head Terminal compare with the Stainless Steel Swage Eye Terminal?▾
Do you ship the Stainless Steel Dome Head Terminal outside the UAE?▾
Do you hold the Stainless Steel Dome Head Terminal for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Spelter sockets: open vs closed, zinc vs resin, and when a wedge socket will do
A properly poured spelter socket keeps 100% of the wire rope’s breaking load — the only end fitting besides a swaged socket that does. Open sockets connect with a pin through their jaws; closed sockets take a pin or shackle through a solid eye. A wedge socket is quicker to fit but keeps 80%. Here is how to choose and what a good socket needs.
5 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








