Stainless Steel Drop Forged Weld-on D Ring — 3,000–8,500 lbs WLL

Stainless Steel Drop Forged Weld-on D Ring, in 4 sizes, 1/2″ to 1″, WLL 3,000 to 8,500 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Drop Forged Weld-on D Ring
- Size range: 1/2″ to 1″
- Working load limit: 3,000 to 8,500 lbs
- Size range
- 1/2″ to 1″
- Working load limit
- 3,000 to 8,500 lbs
- Material
- Type 316 stainless steel
- Finish
- Polished
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Type 316 stainless steel, polished.
Sizes and ratings
4 sizes, 1/2″ to 1″. Working load limit 3,000 to 8,500 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged.
Choosing a size
Rate the point for the load and the direction of pull. A swivel point follows the sling; a fixed eye loses capacity when pulled off its axis. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Drop Forged Weld-on D Ring |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/2″ to 1″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 3,000 to 8,500 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Type 316 stainless steel |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-LR-LP-SSDFWDR-050
- Size
- 1/2″
- WLL (lbs)
- 3,000
- B (mm)
- 59.69
- C (mm)
- 53.85
- D (mm)
- 92.71
- E (mm)
- 35.05
- F (mm)
- 49.78
- Weight (lbs)
- 1
- Indus part no.IH-LR-LP-SSDFWDR-062
- Size
- 5/8″
- WLL (lbs)
- 4,500
- B (mm)
- 74.68
- C (mm)
- 64.77
- D (mm)
- 113.8
- E (mm)
- 44.45
- F (mm)
- 65.02
- Weight (lbs)
- 2
- Indus part no.IH-LR-LP-SSDFWDR-075
- Size
- 3/4″
- WLL (lbs)
- 6,500
- B (mm)
- 75.69
- C (mm)
- 65.53
- D (mm)
- 117.6
- E (mm)
- 48.01
- F (mm)
- 65.02
- Weight (lbs)
- 3
- Indus part no.IH-LR-LP-SSDFWDR-100
- Size
- 1″
- WLL (lbs)
- 8,500
- B (mm)
- 76.2
- C (mm)
- 64.01
- D (mm)
- 130.6
- E (mm)
- 54.36
- F (mm)
- 65.02
- Weight (lbs)
- 4
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Drop Forged Weld-on D Ring and what is it used for?▾
How are the Indus part numbers for the Stainless Steel Drop Forged Weld-on D Ring structured?▾
What sizes does the Stainless Steel Drop Forged Weld-on D Ring come in?▾
How do I choose the right size of Stainless Steel Drop Forged Weld-on D Ring?▾
What is the working load limit of the Stainless Steel Drop Forged Weld-on D Ring?▾
What is the Stainless Steel Drop Forged Weld-on D Ring made from?▾
Does the Stainless Steel Drop Forged Weld-on D Ring come with a test certificate?▾
What should the Stainless Steel Drop Forged Weld-on D Ring be used with?▾
How should the Stainless Steel Drop Forged Weld-on D Ring be inspected and used safely?▾
Where is the Stainless Steel Drop Forged Weld-on D Ring typically used?▾
How does the Stainless Steel Drop Forged Weld-on D Ring differ from the Stainless Steel Square Ring Plate?▾
Do you stock the Stainless Steel Drop Forged Weld-on D Ring in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Anschweißstutzen
- fr
- raccord à souder
- es
- racor para soldar
- it
- raccordo a saldare
From the blog
Written about this range
Lifting & rigging
Lifting points compared: weld-on pad eyes, bolt-on and swivel lifting points, and eye bolts
A weld-on lifting point is only as good as its weld. A bolt-on point is only as good as its thread engagement and torque. A swivel point turns to face the sling, but not every one keeps its full rating sideways. Here is how the four kinds of lifting point compare, and what each needs to be fitted properly.
6 min read
Lifting & rigging
Precast concrete lifting clutches: how spherical-head anchor systems work, and how to use them safely
A lifting clutch hooks onto the spherical head of an anchor cast into a precast unit, and is released by hand once the unit is set down. The system is only as safe as its weakest decision: the anchor’s load class, the concrete’s strength at lifting, and the angle of pull. Here is how the system works and the rules makers set.
5 min read
Lifting & rigging
Eye bolt types and angled loads: plain, shoulder and DIN 580 collar eye bolts
A plain eye bolt is rated for a straight pull only. A shoulder eye bolt pulled at 45° keeps 30% of its rating. A DIN 580 collar eye bolt has its own table for angled loads and none at all for a pull across the eye. Here is how each type is rated, fitted and derated.
8 min read








