Stainless Steel D Ring Wire Support
Stainless Steel D Ring Wire Support, in 1 size, 9 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel D Ring Wire Support
- Size range: 9 mm
- Size range
- 9 mm
- Material
- Stainless steel 304/316
- Finish
- Polished
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Stainless steel 304/316, polished.
Sizes
1 size, 9 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel D Ring Wire Support |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 9 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304/316 |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
1 size| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | Ø (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| IH-LR-RL-DRWSSS-9MM | 9 mm | 75 | 66 | 45 | 9 | 8 | 0.11 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Ø — Dimension Ø on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel d ring wire support come in?▾
Can a swivel rotate under load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Eye Swivel — JIS Type, Single Eye
Chain Swivel — G-401 Pattern, Hot-Dip Galvanized
Jaw End Swivel
Weldless Pear Link — Carbon and Alloy
Repair Link — Zinc Plated
Regular Swivel — Eye and Eye
Stainless Steel Double Ring
