Stainless Steel Double Ring — 8–10 mm

Stainless Steel Double Ring, in 2 sizes, 8 mm to 10 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Double Ring
- Size range: 8 mm to 10 mm
- Size range
- 8 mm to 10 mm
- Material
- Stainless steel type 304 / 316
- Finish
- Polished
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Stainless steel type 304 / 316, polished.
Sizes
2 sizes, 8 mm to 10 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Double Ring |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 8 mm to 10 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel type 304 / 316 |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-LR-RL-RSSDR-8MM
- Size
- 8 mm
- A (mm)
- 8
- L (mm)
- 31
- Weight (kg)
- 0.096
- Indus part no.IH-LR-RL-RSSDR-10MM
- Size
- 10 mm
- A (mm)
- 10
- L (mm)
- 60
- Weight (kg)
- 0.261
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the stainless steel double ring and what sizes does it come in?▾
How do I read the Indus part number on the stainless steel double ring?▾
Which sizes of the stainless steel double ring are listed, and what do they weigh?▾
How do I choose the right size of stainless steel double ring?▾
What working load limit does the stainless steel double ring have?▾
What is the stainless steel double ring made of, and how is it finished?▾
Which standard or certificate applies to the stainless steel double ring?▾
What does the stainless steel double ring connect to?▾
How should the stainless steel double ring be inspected before use?▾
Where is the stainless steel double ring used?▾
stainless steel double ring compared with the round ring?▾
Do you stock the stainless steel double ring, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lifting swivels explained: positioning swivels, bearing swivels and swivel hooks
A swivel stops rigging twisting, but most swivels are not designed to turn while they carry the load. Regular eye and jaw swivels, bearing swivels that are built to rotate under load, swivel hooks of both kinds, and why a swivel is chosen by its rating, not by the size stamped on it.
3 min read
Lifting & rigging
Snap hooks and quick links: ratings, gates and where not to use them
A 10 mm quick link on our listings is rated 2,640 lbs; a 10 mm Grade 80 chain sling leg, 3.15 tonnes. How quick links and snap hooks are rated, why the gate decides their strength, and why they are not overhead lifting hardware.
6 min read
Lifting & rigging
Master links explained: single links, assemblies with sub-links, and sizing to the hook
The master link is the top of a multi-leg sling: it gathers the legs and sits in the crane hook. Two legs can share a single master link; three or four need an assembly with sub-links. And the link has to fit the hook as well as the chain. Here is how to choose one.
5 min read








