Stainless Steel Bow Shackle — JIS Type, Screw Pin, 5–25 mm

Stainless Steel Bow Shackle (JIS type), in 9 sizes, 5 mm to 25 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Bow Shackle
- Pattern / standard: JIS type
- Size range: 5 mm to 25 mm
- Size range
- 5 mm to 25 mm
- Material
- Stainless steel 304 or 316 bow shackle
- Finish
- Polished
Product description
A shackle joins a sling, hook or chain to a lifting point and opens with a removable pin. Built to the JIS pattern. Stainless steel 304 or 316 bow shackle, polished.
Sizes and ratings
9 sizes, 5 mm to 25 mm. Minimum breaking load 91 to 2,238 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged / stamping.
Choosing a size
Choose on working load limit for the pull you will actually apply. A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull. Side-loading reduces the rating, and a screw pin must be fully seated before loading.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Bow Shackle |
| Pattern / standard | JIS type |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5 mm to 25 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 91 to 2,238 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 bow shackle |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-LR-SH-BSSPJISSS-5MM
- Size
- 5 mm
- Min breaking load (kN)
- 91
- A (mm)
- 10
- D (mm)
- 5
- D1 (mm)
- 5
- L (mm)
- 20
- R (mm)
- 15
- Indus part no.IH-LR-SH-BSSPJISSS-6MM
- Size
- 6 mm
- Min breaking load (kN)
- 132
- A (mm)
- 12
- D (mm)
- 6
- D1 (mm)
- 6
- L (mm)
- 24
- R (mm)
- 18
- Indus part no.IH-LR-SH-BSSPJISSS-8MM
- Size
- 8 mm
- Min breaking load (kN)
- 237
- A (mm)
- 16
- D (mm)
- 8
- D1 (mm)
- 8
- L (mm)
- 32
- R (mm)
- 24
- Indus part no.IH-LR-SH-BSSPJISSS-10MM
- Size
- 10 mm
- Min breaking load (kN)
- 373
- A (mm)
- 20
- D (mm)
- 10
- D1 (mm)
- 10
- L (mm)
- 40
- R (mm)
- 30
- Indus part no.IH-LR-SH-BSSPJISSS-12MM
- Size
- 12 mm
- Min breaking load (kN)
- 549
- A (mm)
- 24
- D (mm)
- 12
- D1 (mm)
- 12
- L (mm)
- 48
- R (mm)
- 36
- Indus part no.IH-LR-SH-BSSPJISSS-16MM
- Size
- 16 mm
- Min breaking load (kN)
- 977
- A (mm)
- 32
- D (mm)
- 16
- D1 (mm)
- 16
- L (mm)
- 64
- R (mm)
- 48
- Indus part no.IH-LR-SH-BSSPJISSS-19MM
- Size
- 19 mm
- Min breaking load (kN)
- 1,526
- A (mm)
- 38
- D (mm)
- 19
- D1 (mm)
- 19
- L (mm)
- 76
- R (mm)
- 57
- Indus part no.IH-LR-SH-BSSPJISSS-22MM
- Size
- 22 mm
- Min breaking load (kN)
- 1,847
- A (mm)
- 44
- D (mm)
- 22
- D1 (mm)
- 22
- L (mm)
- 88
- R (mm)
- 66
Show all 9 sizesShow fewer sizes
- Indus part no.IH-LR-SH-BSSPJISSS-25MM
- Size
- 25 mm
- Min breaking load (kN)
- 2,238
- A (mm)
- 50
- D (mm)
- 25
- D1 (mm)
- 25
- L (mm)
- 100
- R (mm)
- 75
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Stainless Steel Bow Shackle — JIS Type, Screw Pin and what is it used for?▾
What sizes does the Stainless Steel Bow Shackle — JIS Type, Screw Pin come in?▾
How do I size the Stainless Steel Bow Shackle — JIS Type, Screw Pin for a job?▾
What load rating does the Stainless Steel Bow Shackle — JIS Type, Screw Pin have?▾
How do I order a specific size of the Stainless Steel Bow Shackle — JIS Type, Screw Pin?▾
How does the Stainless Steel Bow Shackle — JIS Type, Screw Pin compare with the Stainless Steel D Shackle — JIS Type, Screw Pin?▾
What is the Stainless Steel Bow Shackle — JIS Type, Screw Pin made of?▾
What standard and certificate come with the Stainless Steel Bow Shackle — JIS Type, Screw Pin?▾
What can the Stainless Steel Bow Shackle — JIS Type, Screw Pin be connected to?▾
How do I inspect the Stainless Steel Bow Shackle — JIS Type, Screw Pin before use?▾
What are the typical applications of the Stainless Steel Bow Shackle — JIS Type, Screw Pin?▾
Does Indus stock the Stainless Steel Bow Shackle — JIS Type, Screw Pin in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
How to spot counterfeit and non-conforming rigging hardware
Counterfeit shackles and hooks have turned up on job sites in Africa, Europe and the US — sometimes sold through legitimate suppliers who were themselves deceived. They look right until you read the markings closely. The red flags investigators and industry alerts have found, a receiving check that catches most fakes, and what to do when you find one.
4 min read
Lifting & rigging
Types of shackles: anchor vs chain, and screw pin vs bolt type vs round pin
A shackle is chosen on two decisions: the body shape, which sets the directions it can be loaded from, and the pin, which sets how securely it stays closed. Here is how anchor and chain shackles differ, when each pin type is right, and how material changes the rating at the same size.
10 min read
Lifting & rigging
Buying shackles for a UAE or GCC project: what to put on the purchase order
Most shackle problems on site start at the purchase order: a size with no pattern, a pattern with no pin type, a rating nobody checked, a certificate nobody asked for. A buyer’s guide for contractors in the UAE and the Gulf — pattern, pin, grade, size, finish, certificate and delivery — and the six lines every shackle order should carry.
5 min read








