Stainless Steel DIN 582 Eye Nut — UNC Thread
Stainless Steel DIN 582 Eye Nut, in 10 sizes, 3/16″ to 1-7/16″. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel DIN 582 Eye Nut
- Pattern / standard: DIN 582
- Size range: 3/16″ to 1-7/16″
- Size range
- 3/16″ to 1-7/16″
- Material
- Type 304 or 316 stainless steel
- Finish
- Polished
Product description
Stainless Steel DIN 582 Eye Nut for tension, lashing and fixing duty. Built to the DIN 582 pattern. Type 304 or 316 stainless steel, polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
10 sizes, 3/16″ to 1-7/16″. Minimum breaking load 750 to 59,760 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Precision cast.
Choosing a size
The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel DIN 582 Eye Nut |
| Pattern / standard | DIN 582 |
| Sizes | 10 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/16″ to 1-7/16″ |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 750 to 59,760 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | Size | Min breaking load (lbs) | H (mm) | D3 (mm) |
|---|---|---|---|---|
| IH-LR-EB-SSD582ENU-019 | 3/16″ | 750 | 24.99 | 14.99 |
| IH-LR-EB-SSD582ENU-025 | 1/4″ | 1,370 | 27.99 | 16 |
| IH-LR-EB-SSD582ENU-031 | 5/16″ | 1,810 | 32.99 | 19.99 |
| IH-LR-EB-SSD582ENU-038 | 3/8″ | 2,980 | 42.01 | 24.99 |
| IH-LR-EB-SSD582ENU-050 | 1/2″ | 4,410 | 51 | 30 |
| IH-LR-EB-SSD582ENU-062 | 5/8″ | 9,100 | 59.99 | 35 |
| IH-LR-EB-SSD582ENU-075 | 3/4″ | 15,590 | 68.81 | 40 |
| IH-LR-EB-SSD582ENU-100 | 1″ | 23,380 | 86.79 | 50.01 |
| IH-LR-EB-SSD582ENU-119 | 1-3/16″ | 41,570 | 104.8 | 59.99 |
| IH-LR-EB-SSD582ENU-144 | 1-7/16″ | 59,760 | 122.6 | 70 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. H — Dimension H on the manufacturer dimension drawing. D3 — Dimension D3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the stainless steel DIN 582 eye nut come in?▾
Can it be used for lifting?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Unwelded Eye Bolt
Stainless Steel JIS B 1168 Eye Bolt
Stainless Steel JIS B 1169 Eye Nut
Stainless Steel Lag Eye Screw / Bolt
Stainless Steel Long Shank Eye Bolt with Nut and Washer
Stainless Steel Ring Eye Bolt
Stainless Steel Regular Nut Eye Bolt — G-291 Pattern
