Stainless Steel Captive Pin Shackle — 4–720 mm

Stainless Steel Captive Pin Shackle (European type), in 41 sizes, 4 mm to 720 mm. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Captive Pin Shackle
- Pattern / standard: European type
- Size range: 4 mm to 720 mm
- Size range
- 4 mm to 720 mm
- Material
- Stainless steel 304 or 316 d shackle
- Finish
- Polished / electrophoretic coating
Product description
Stainless Steel Captive Pin Shackle for tension, lashing and fixing duty. Built to the European pattern. Stainless steel 304 or 316 d shackle, polished / electrophoretic coating.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
41 sizes, 4 mm to 720 mm. Minimum breaking load 5.2 to 494 kN. Available as: bow, dee, long dee, wide dee, bow, square head pin, dee, square head pin. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Forged / stamping.
Choosing a size
Choose on working load limit for the pull you will actually apply. A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull. Side-loading reduces the rating, and a screw pin must be fully seated before loading.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Captive Pin Shackle |
| Pattern / standard | European type |
| Sizes | 41 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 4 mm to 720 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 5.2 to 494 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 d shackle |
| Finish | Polished / electrophoretic coating |
Shipping & lead time
Sizes & part numbers
41 sizes- Indus part no.IH-LR-SH-SSCPS-4MM-B
- Size
- 4 mm
- Type
- Bow
- Min breaking load (kN)
- 52
- A (mm)
- 8
- B (mm)
- —
- C (mm)
- —
- D (mm)
- 4
- D1 (mm)
- 35
- E (mm)
- —
- L (mm)
- 16
- R (mm)
- 14
- Indus part no.IH-LR-SH-SSCPS-5MM-B
- Size
- 5 mm
- Type
- Bow
- Min breaking load (kN)
- 82
- A (mm)
- 10
- B (mm)
- —
- C (mm)
- —
- D (mm)
- 5
- D1 (mm)
- 44
- E (mm)
- —
- L (mm)
- 20
- R (mm)
- 17
- Indus part no.IH-LR-SH-SSCPS-6MM-B
- Size
- 6 mm
- Type
- Bow
- Min breaking load (kN)
- 119
- A (mm)
- 12
- B (mm)
- —
- C (mm)
- —
- D (mm)
- 6
- D1 (mm)
- 53
- E (mm)
- —
- L (mm)
- 24
- R (mm)
- 21
- Indus part no.IH-LR-SH-SSCPS-8MM-B
- Size
- 8 mm
- Type
- Bow
- Min breaking load (kN)
- 213
- A (mm)
- 16
- B (mm)
- —
- C (mm)
- —
- D (mm)
- 8
- D1 (mm)
- 71
- E (mm)
- —
- L (mm)
- 32
- R (mm)
- 28
- Indus part no.IH-LR-SH-SSCPS-10MM-B
- Size
- 10 mm
- Type
- Bow
- Min breaking load (kN)
- 336
- A (mm)
- 20
- B (mm)
- —
- C (mm)
- —
- D (mm)
- 10
- D1 (mm)
- 89
- E (mm)
- —
- L (mm)
- 40
- R (mm)
- 35
- Indus part no.IH-LR-SH-SSCPS-12MM-B
- Size
- 12 mm
- Type
- Bow
- Min breaking load (kN)
- 494
- A (mm)
- 24
- B (mm)
- —
- C (mm)
- —
- D (mm)
- 12
- D1 (mm)
- 108
- E (mm)
- —
- L (mm)
- 48
- R (mm)
- 42
- Indus part no.IH-LR-SH-SSCPS-4MM-D
- Size
- 4 mm
- Type
- Dee
- Min breaking load (kN)
- 5.2
- A (mm)
- 8
- B (mm)
- —
- C (mm)
- —
- D (mm)
- 4
- D1 (mm)
- 3.5
- E (mm)
- —
- L (mm)
- 16
- R (mm)
- —
- Indus part no.IH-LR-SH-SSCPS-5MM-D
- Size
- 5 mm
- Type
- Dee
- Min breaking load (kN)
- 82
- A (mm)
- 10
- B (mm)
- —
- C (mm)
- —
- D (mm)
- 5
- D1 (mm)
- 44
- E (mm)
- —
- L (mm)
- 20
- R (mm)
- —
Show all 41 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Stainless Steel Captive Pin Shackle and what is it used for?▾
Which sizes of Stainless Steel Captive Pin Shackle are available?▾
How do I size the Stainless Steel Captive Pin Shackle for a job?▾
What load rating does the Stainless Steel Captive Pin Shackle have?▾
How do I order a specific size of the Stainless Steel Captive Pin Shackle?▾
How does the Stainless Steel Captive Pin Shackle compare with the Stainless Steel Key Pin Shackle?▾
What is the Stainless Steel Captive Pin Shackle made of?▾
Which standard does the Stainless Steel Captive Pin Shackle meet?▾
What does the Stainless Steel Captive Pin Shackle connect with?▾
How do I inspect the Stainless Steel Captive Pin Shackle before use?▾
What are the typical applications of the Stainless Steel Captive Pin Shackle?▾
Does Indus stock the Stainless Steel Captive Pin Shackle in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
How to spot counterfeit and non-conforming rigging hardware
Counterfeit shackles and hooks have turned up on job sites in Africa, Europe and the US — sometimes sold through legitimate suppliers who were themselves deceived. They look right until you read the markings closely. The red flags investigators and industry alerts have found, a receiving check that catches most fakes, and what to do when you find one.
4 min read
Lifting & rigging
Types of shackles: anchor vs chain, and screw pin vs bolt type vs round pin
A shackle is chosen on two decisions: the body shape, which sets the directions it can be loaded from, and the pin, which sets how securely it stays closed. Here is how anchor and chain shackles differ, when each pin type is right, and how material changes the rating at the same size.
10 min read
Lifting & rigging
Buying shackles for a UAE or GCC project: what to put on the purchase order
Most shackle problems on site start at the purchase order: a size with no pattern, a pattern with no pin type, a rating nobody checked, a certificate nobody asked for. A buyer’s guide for contractors in the UAE and the Gulf — pattern, pin, grade, size, finish, certificate and delivery — and the six lines every shackle order should carry.
5 min read








