Skip to content
+971 52 2477942
Indus Hydraulics
Lane DXB → NERépublique du Niger

Export from Dubai

NE

Hydraulic & industrial hose supplier in Niger

Niger is the longest African lane we run: sea around the Cape to Cotonou or Lomé, then a thousand kilometres of road north to Niamey, and further again to the uranium country around Arlit. Six to seven weeks door to door, which makes consolidation and an accurate part list worth more here than anywhere else.

Typical transit
Typically 38–48 days, sea then road
Freight
Sea to Cotonou or Lomé then the corridor north · Air freight into Niamey where the schedule is tighter
Incoterms 2020
DAP Niamey or the buyer’s site · CIF Cotonou · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Import declaration before shipment · Pre-shipment verification for regulated goods · Beninese or Togolese transit documents · Documents in French
Request an export quote WhatsApp usEmail sales@indushydraulics.me
Fig. 01 · Export lane DXB → NEMercator · WGS 84
GAYANIAMEYZINDERMARADIAGADEZARLITTAHOUADIFFA0°5°E10°E15°E15°N20°NN400 KMSEA + ROAD · 14,310 KM · FROM JEBEL ALI · DXB
Border crossingDelivery citysea + road corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea + road
Border crossing
Gaya
Transit
38–48 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Niger prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Niger

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp
01

Hoses & Fittings supplier in Niger

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges
A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front
02

Industrial Hoses supplier in Niger

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges
A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block
03

Lifting & Rigging supplier in Niger

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges
A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve
06

Oilfield Valves supplier in Niger

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges
A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front
07

Flow Iron & Wellhead supplier in Niger

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges
A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body
08

Valves & Manifolds supplier in Niger

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front
09

Blowout Preventers (BOP) supplier in Niger

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box
10

Instrumentation & Controls supplier in Niger

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges
A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid
11

Well Testing Equipment supplier in Niger

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges
A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side
12

Fracturing Equipment supplier in Niger

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges
A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets
20

Hydraulic Tools & Bolting supplier in Niger

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges

Export quote · NE

Send the part list for Niger

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Niger

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Niger are declared under.

Freight

Three ways in, priced per shipment

Sea + road, via Cotonou38–48 days
Cotonou then the corridor to NiameyDefault for most orders
Air freight6–8 days
DXB to NIMWhen the line is down
Sea + road, via Lomé40–50 days
Lomé then the corridor northAlternative routing

Sequence

How an order to Niger works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once accepted, verification and both sets of transit documents are arranged before the container is loaded.
  4. 04Goods sail to the coast and move north by road, with the paperwork and tracking together.

Industries

Who we supply in Niger

Close-up of a mining shovel’s hydraulic boom cylinders and hoses as it loads a haul truck in an open-pit mine
mining

Mining in Niger

Dust-rated valves, four-spiral hose and high-cycle cylinders for uranium, coal and gold operations.

Industry page
A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset
oil · gas

Oil & Gas in Niger

Field, pipeline and refinery support — hose, valves and high-pressure fittings.

Industry page
An excavator’s boom cylinders and hydraulic hoses on a construction site, a hazy city skyline behind
construction

Construction in Niger

Excavator, crane and batching-plant hydraulics for road and mine-infrastructure contracts.

Industry page
Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath
power

Power & Energy in Niger

Actuator and governor hydraulics for thermal and solar generation.

Industry page
A glowing steel strip passing through a hot rolling mill stand with its hydraulic cylinders and tubing
steel

Steel & Metals in Niger

High-force cylinders and servo valves for forming and fabrication lines.

Industry page
A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon
marine

Marine & Offshore in Niger

Container handling hydraulics for the inland dry port at Niamey.

Industry page

Brands stocked for Niger

Delivery coverage

Cities and sites we deliver to in Niger

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

  • Niamey

    Niamey

  • Zinder

    Zinder Region

  • Maradi

    Maradi Region

  • Agadez

    Agadez Region

  • Arlit

    Agadez Region

  • Tahoua

    Tahoua Region

  • Diffa

    Diffa Region

  • Dosso

    Dosso Region

  • Gaya

    Dosso Region

  • Tillabéri

    Tillabéri Region

  • Birni N’Konni

    Tahoua Region

  • In Gall

    Agadez Region

Questions we get asked

Supplying Niger, in detail

01

Do you have a branch in Niger?

No. Niger is supplied from our Dubai warehouse through Cotonou or Lomé, or by air into Niamey when the schedule requires it.

02

Why is this the longest African lane?

Because it combines a Cape-routed sea leg with a thousand kilometres of road from the coast, and Arlit adds another nine hundred beyond Niamey.

03

Cotonou or Lomé?

Cotonou for most orders, since the corridor to Niamey is the established one. Lomé when Cotonou is congested.

04

Can you deliver to Arlit and the mining north?

Yes, on DAP terms to the site gate. The leg beyond Niamey is long and is quoted rather than estimated.

05

Can you supply mining operations directly?

Yes. Dust-rated valves, four-spiral hose, high-cycle cylinders and crusher-duty components, with material certificates where the contract calls for them.

06

Is air freight worth it?

On this lane, more often than most — six to eight days against six to seven weeks. We quote both so the choice is yours to make on cost.

07

What currency do you quote in?

USD. It keeps the valuation consistent across the transit country and the destination.

08

Is there a minimum order?

No minimum on stock items, but this is the lane where consolidation saves the most — one consignment, one set of documents, one corridor movement.

Next step

Shipping to Niger?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

WhatsApp usEmail the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · NE

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets