Skip to content
+971 52 2477942
Lane DXB → AZAzərbaycan Respublikası

Export from Dubai

AZ

Hydraulic & industrial hose supplier in Azerbaijan

Indus Hydraulics supplies Azerbaijan from Dubai by air into Baku in three to five days, by sea to Poti and rail across Georgia for palletised volume, and by Caspian feeder to Alat for project cargo. Azerbaijan is outside the Eurasian Economic Union, so regulated goods need Azerbaijani conformity documents in the importer’s own name; an EAC certificate does not carry across. The Caspian is enclosed, so equipment for ACG, Shah Deniz and the Sangachal terminal arrives overland or by air, and dimensions and weight are settled at enquiry.

Typical transit
Typically 3–5 days by air from dispatch
Freight
Air freight to Baku · Sea to Poti and rail across Georgia for volume · Caspian feeder to Alat for project cargo
Incoterms 2020
DAP to the buyer’s site · CIF Poti · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Certificate of conformity for regulated goods, in the importer’s name · Customs declaration through the single-window system · Certificate of Origin, Dubai Chamber attested
Fig. 01 · Export lane DXB → AZMercator · WGS 84
ARMENIAALAT · BAKU PORTBAKUSUMGAITGANJAMINGACHEVIRLANKARANNAKHCHIVANSHAKI46°E48°E50°E40°N42°NN100 KMAIR · 1,770 KM · FROM DUBAI · DXB
Port of entryDelivery cityair corridor from DUBAI · DXB
Origin
Dubai · DXB
Primary mode
Air freight
Port of entry
Alat · Baku
Transit
3–5 days by air
Quoted in
USD
Docs prepared
Before dispatch, in Dubai
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Azerbaijan prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Azerbaijan

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Export quote · AZ

Send the part list for Azerbaijan

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Azerbaijan

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Azerbaijan are declared under.

Freight

Three ways in, priced per shipment

Air freight3–5 days
DXB to GYDDefault for most orders
Sea + rail28–38 days
Jebel Ali to Poti, rail to BakuVolume and palletised orders
Caspian feeder30–40 days
Via Aktau or Turkmenbashi to AlatProject and oversize cargo

Sequence

How an order to Azerbaijan works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once accepted, Azerbaijani conformity documents are prepared in the importer’s name before dispatch.
  4. 04Goods dispatch by air or rail, and you get the paperwork and tracking together.

Industries

Who we supply in Azerbaijan

Delivery coverage

Cities and sites we deliver to in Azerbaijan

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

14 locations listed

  • Baku

    Baku

  • Sumgait

    Sumgait

  • Ganja

    Ganja

  • Mingachevir

    Mingachevir

  • Lankaran

    Lankaran

  • Nakhchivan

    Nakhchivan AR

  • Shaki

    Shaki

  • Alat

    Baku

  • Sangachal

    Baku

  • Garadagh

    Baku

  • Khirdalan

    Absheron

  • Shirvan

    Shirvan

  • Sabirabad

    Sabirabad

  • Yevlakh

    Yevlakh

Questions we get asked

Supplying Azerbaijan, in detail

01

Will a Russian or Kazakh EAC certificate clear goods at Baku?

No. Azerbaijan is outside the Eurasian Economic Union, so an EAC certificate issued for a Kazakh or Russian consignee does not carry across the border. Regulated goods need Azerbaijani conformity documents raised in the importer’s own name by a recognised certification body, settled per product at quotation. The customs declaration then runs through the single-window system against the description on the invoice, so both are easier to arrange before the goods move than at Baku.

02

Why does nothing reach the Caspian offshore fields directly by sea from the Gulf?

Because the Caspian is enclosed. Equipment for an offshore field off Baku arrives by air, by sea to Poti and rail across Georgia, or by Caspian feeder from Aktau or Turkmenbashi to Alat — never on a direct ocean vessel. That turns the usual sea-versus-air decision into a routing question. Because everything travels overland or by air to the shore base, dimensions and weight should come with the enquiry, not at booking.

03

What are the freight options into Baku, and how long does each take?

Three. Air freight from Dubai to Baku takes three to five days and is the default for most orders. Sea to Poti with rail across Georgia runs 28–38 days and suits volume and palletised orders. The Caspian feeder through Aktau or Turkmenbashi to Alat runs 30–40 days and is reserved for project and oversize cargo. Each routing is quoted per shipment, on DAP, CIF Poti, FOB Jebel Ali or EXW Dubai terms.

04

What can you supply for ACG, Shah Deniz and other Caspian platforms?

API 6A and API 16C rated equipment, SS316L and duplex fittings for topside service, and NACE MR0175 material documentation where the contract requires it. We supply TechnipFMC, Cameron (SLB), SPM, Anson, Stream-Flo and WOM equipment alongside hydraulic hose, fittings and adapters. Material and test certificates come from the mill or our test bench where the order calls for them, and travel with the goods to the shore base.

05

Can you deliver to the Sangachal terminal and the yards south of Baku?

Yes, on DAP terms to the gate at Sangachal and at other terminals and yards along the coast south of Baku, including Garadagh and Alat. Site access requirements — gate passes, delivery windows, packing and marking rules — need to come with the order rather than after it, because a consignment that arrives without them waits outside the gate while the paperwork catches up.

06

Can you supply to SOCAR-contracted work?

Yes, as a supplier to the contractor. Where a tender names a standard we quote against that standard, and the certification travels with the goods: Azerbaijani conformity documents in the importer’s name where the line is regulated, material and test certificates where the order calls for them, and an attested certificate of origin. Send the tender’s technical schedule with the enquiry and we confirm line by line what we can supply against it.

07

Can hose assemblies arrive tagged so a Baku shore base can trace them?

Yes. Assemblies are crimped and pressure-tested in Dubai and shipped as finished items, each tagged with the hose, the fitting and the test date. That lets a shore base or platform store match an assembly to its test record without opening the crate, and it means nothing needs to be made up at the shore base. Send bore, thread, pressure and the length between fitting faces, or a photograph of the failed assembly.

08

When is the Caspian feeder to Alat the right choice?

When the cargo is project or oversize equipment that suits neither air freight nor the rail leg across Georgia. The feeder runs through Aktau or Turkmenbashi to the Port of Baku at Alat, typically 30–40 days from dispatch. It is quoted per consignment, and the dimensions, weights and lifting points need to be known at enquiry, because they decide whether the feeder or rail is the workable routing.

09

What hose suits chemical and polymer plant duty at Sumgait?

It depends on the medium, so we start from the chemical, the concentration and the temperature rather than from a hose name. Hydraulic circuits on process plant take standard hydraulic hose; transfer lines carrying acids, solvents or hydrocarbons need industrial hose and couplings whose liner and cover are rated for that medium. Tell us what flows through the line, at what temperature and pressure, and how it is cleaned.

10

What does the single-window customs declaration need from the supplier?

Accurate, consistent descriptions. The declaration is made on arrival by the consignee or clearing agent through the single-window system, against the description on our commercial invoice. So the invoice, packing list, conformity documents and Dubai Chamber attested certificate of origin must describe each line in the same words. We prepare them together before dispatch, in Dubai, so nothing has to be argued at Baku.

Next step

Shipping to Azerbaijan?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · AZ

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets