Skip to content
+971 52 2477942
Indus Hydraulics
Lane DXB → GT

Export from Dubai

GT

Hydraulic & industrial hose supplier in Guatemala

Indus Hydraulics ships hydraulic hose, fittings, valves and industrial hose from Dubai to Guatemala by sea into Puerto Quetzal on the Pacific or Santo Tomás de Castilla on the Caribbean, with air freight to Guatemala City, under a Dubai Chamber attested certificate of origin and Spanish documents. The two coasts are different oceans and different transits, so the port is fixed against the delivery town. Demand peaks with the sugar zafra, November to May, and the useful order lands before the crush, not during it.

Typical transit
Typically 30–38 days by sea eastbound to Puerto Quetzal, 34–42 days via Suez to Santo Tomás de Castilla · Air freight 4–8 days to Guatemala City
Freight
Sea freight from Jebel Ali through Suez and across the Atlantic to Santo Tomás de Castilla · Eastbound through Malacca and the Pacific to Puerto Quetzal · Air freight into Guatemala City where the schedule is tighter
Incoterms 2020
CIF Puerto Quetzal · DAP to the buyer’s site or mill · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Customs declaration raised by the importer · Certificate of Origin, Dubai Chamber attested · Documents in Spanish · Material and test certificates where the mill specification calls for them
Request an export quote WhatsApp usEmail sales@indushydraulics.me
Fig. 01 · Export lane DXB → GTMercator · WGS 84
EL SALVADORBELIZEPUERTO QUETZALGUATEMALA CITYESCUINTLARETALHULEUQUETZALTENANGOSANTO TOMÁS DE CASTILLAEL ESTORCOBÁN92°W90°W88°W14°N16°NN100 KMSEA · PACIFIC · 24,180 KM · FROM JEBEL ALI · DXB
Port of entryDelivery citysea · pacific corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea, via the Pacific
Port of entry
Puerto Quetzal
Transit
30–38 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Guatemala prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Guatemala

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp
01

Hoses & Fittings supplier in Guatemala

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges
A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front
02

Industrial Hoses supplier in Guatemala

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges
A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block
03

Lifting & Rigging supplier in Guatemala

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges
A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve
06

Oilfield Valves supplier in Guatemala

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges
A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front
07

Flow Iron & Wellhead supplier in Guatemala

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges
A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body
08

Valves & Manifolds supplier in Guatemala

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front
09

Blowout Preventers (BOP) supplier in Guatemala

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box
10

Instrumentation & Controls supplier in Guatemala

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges
A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid
11

Well Testing Equipment supplier in Guatemala

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges
A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side
12

Fracturing Equipment supplier in Guatemala

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges
A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets
20

Hydraulic Tools & Bolting supplier in Guatemala

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges

Export quote · GT

Send the part list for Guatemala

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Guatemala

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Guatemala are declared under.

Freight

Three ways in, priced per shipment

Sea, FCL, Pacific30–38 days
Eastbound through Malacca to Puerto QuetzalDefault — the mills are on the coast
Air freight4–8 days
DXB to GUA, with connectionsMid-harvest, when a mill is down
Sea, FCL, Atlantic34–42 days
Suez and the Atlantic to Santo TomásThe east and the nickel belt

Sequence

How an order to Guatemala works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03The order is set against the zafra calendar rather than against failures, because a five-week lane cannot rescue a mill in February and everybody knows the harvest dates a year in advance.
  4. 04Goods sail from Jebel Ali on whichever ocean serves the destination, and you get the paperwork and tracking together.

Industries

Who we supply in Guatemala

An excavator’s boom cylinders and hydraulic hoses on a construction site, a hazy city skyline behind
construction

Sugar Mills & Construction in Guatemala

Cane tables, crushers, bagasse conveyors and mill-house hydraulics on the Pacific plain around Escuintla, Santa Lucía Cotzumalguapa and Mazatenango, plus excavator and crane hydraulics for road and building works around Guatemala City.

Industry page
Close-up of a mining shovel’s hydraulic boom cylinders and hoses as it loads a haul truck in an open-pit mine
mining

Mining in Guatemala

Nickel at El Estor on Lake Izabal and aggregate quarries serving the capital — abrasion-resistant hose, high-cycle assemblies and dust-rated fittings, shipped through Santo Tomás de Castilla for the east.

Industry page
Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath
power

Power & Energy in Guatemala

Governor and actuator hydraulics for hydro plants, the bagasse cogeneration units that run alongside the mills during the zafra, and thermal plant on the Pacific coast.

Industry page
A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon
marine

Marine & Offshore in Guatemala

Crane, ship-to-shore and deck-machinery hydraulics for the container and bulk terminals at Puerto Quetzal and Santo Tomás de Castilla, including sugar and molasses export handling.

Industry page
A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset
oil · gas

Oil & Gas in Guatemala

Fuel import terminal, tank-farm and loading-arm support on both coasts — transfer hose, valves and fittings for terminals that keep the mills, plants and fleets supplied.

Industry page
A glowing steel strip passing through a hot rolling mill stand with its hydraulic cylinders and tubing
steel

Steel & Metals in Guatemala

Cylinders, valves and hose assemblies for fabrication shops and mill workshops that rebuild cane-handling and crushing equipment between harvests.

Industry page

Brands stocked for Guatemala

Delivery coverage

Cities and sites we deliver to in Guatemala

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

  • Guatemala City

    Guatemala

  • Puerto Quetzal

    Escuintla

  • Escuintla

    Escuintla

  • Santa Lucía Cotzumalguapa

    Escuintla

  • Retalhuleu

    Retalhuleu

  • Mazatenango

    Suchitepéquez

  • Quetzaltenango

    Quetzaltenango

  • Santo Tomás de Castilla

    Izabal

  • Puerto Barrios

    Izabal

  • El Estor

    Izabal

  • Cobán

    Alta Verapaz

  • Chiquimula

    Chiquimula

Questions we get asked

Supplying Guatemala, in detail

01

How far ahead of the zafra should a Guatemalan mill place its order?

Before the crush starts, ideally during the previous off-season. The mills run from roughly November to May, and a lane of four to six weeks cannot rescue a crusher that fails in February. Because the harvest dates are known a year ahead, the useful order is set against the calendar and what wore out last campaign, not against the first failure. A consolidated pre-season order also avoids paying air freight mid-harvest.

02

Should our cargo land at Puerto Quetzal or Santo Tomás de Castilla?

Puerto Quetzal for the Pacific mills, Escuintla and Guatemala City, which is most of the demand; Santo Tomás de Castilla for Izabal, the east and the nickel belt around El Estor. They sit on different oceans: Puerto Quetzal is reached eastbound through Malacca and across the Pacific, Santo Tomás through Suez and the Atlantic. We fix the routing against your delivery town at quotation rather than defaulting to one coast.

03

How long does sea freight from Jebel Ali to Puerto Quetzal take?

Typically 30 to 38 days by FCL, sailing eastbound through Malacca and across the Pacific. The Atlantic lane to Santo Tomás de Castilla through Suez runs 34 to 42 days. Air freight from Dubai into Guatemala City (GUA) takes 4 to 8 days with connections and is the option when a mill is down mid-harvest. Transit is counted from dispatch, and the documents are prepared before the vessel sails.

04

Can you supply hose for cane tables, crushers and bagasse handling?

Yes — abrasion-resistant covers and high-cycle hose assemblies for cane tables, crushers, mill drives and bagasse conveyors. Cane dust, juice and constant cycling wear a cover faster than pressure alone suggests, so tell us the duty, the shift pattern and where each line runs rather than only the part number. We specify against that and can make the assemblies up to length before they ship.

05

What does Guatemalan customs ask for on imported hose and fittings?

A short file: there is no blanket pre-shipment conformity scheme for industrial hose and fittings. The importer raises the customs import declaration through SAT before arrival, and it is supported by our commercial invoice, a packing list in Spanish that matches the declaration, and a certificate of origin attested by the Dubai Chamber. Material and test certificates are added where the mill specification calls for them.

06

Do the invoice and packing list for SAT have to be in Spanish?

Yes. The documents go in Spanish, and the description of each line must agree across the commercial invoice, the packing list and the importer's declaration. A wording mismatch is the usual cause of a delay at the port, so we agree the Spanish descriptions at quotation and carry them unchanged onto every document before the vessel sails from Jebel Ali.

07

Can you deliver DAP to mills around Escuintla and Santa Lucía Cotzumalguapa?

Yes. On DAP terms we deliver to the mill gate on the Pacific plain, including the Escuintla, Santa Lucía Cotzumalguapa, Mazatenango and Retalhuleu areas. The road leg from Puerto Quetzal is short and it is priced into the quotation with the sea freight, so you compare one delivered figure. CIF Puerto Quetzal is also available if your own broker handles clearance and haulage.

08

Can a pre-zafra order arrive as assemblies made up to length and tagged by machine?

Yes. Send the lengths, end fittings and orientation for each line, and we make the hose assemblies up in Dubai and tag each one with the station or machine reference you give us — crusher, cane table, conveyor or boiler house. A maintenance crew then fits from a labelled kit during the off-season instead of cutting and crimping on site under time pressure.

09

Do you supply the nickel operations at El Estor and the Izabal region?

Yes, routed through Santo Tomás de Castilla on the Atlantic lane, which sits closest to El Estor and Lake Izabal. We supply abrasion-resistant hose, high-cycle assemblies, fittings and valves for mobile plant and processing equipment, and quote DAP to site or CIF Santo Tomás. Tell us the equipment and duty rather than a single part number so the specification fits the dust and cycle load.

10

Do you supply hydraulics for the mills' bagasse cogeneration plants?

Yes — governor and actuator hydraulics, valves, fittings and hose for the cogeneration units that burn bagasse alongside the mills, as well as hydro and thermal plant. Because cogeneration runs with the harvest, its maintenance window is the same off-season as the mill itself, so it is worth including the power-house lines in the same pre-zafra consignment rather than shipping them separately.

11

How do we request a quotation from Guatemala?

Send the part list or a description of each duty, the delivery town or mill, the Incoterm you prefer — CIF Puerto Quetzal, DAP to site, FOB Jebel Ali or EXW Dubai — and the date you need the goods before the zafra. We quote in US dollars, confirm the coast and the transit, and agree the Spanish descriptions for the documents in the same reply.

Next step

Shipping to Guatemala?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

WhatsApp usEmail the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · GT

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets