Skip to content
+971 52 2477942
Indus Hydraulics
Lane DXB → CGRépublique du Congo

Export from Dubai

CG

Hydraulic & industrial hose supplier in Republic of the Congo

Indus Hydraulics supplies the Republic of the Congo from Dubai by sea around the Cape into Pointe-Noire, with air freight into Pointe-Noire or Brazzaville, on a French document set with pre-shipment verification for regulated goods and the import declaration domiciled with your bank. Sea transit is typically 28–34 days. Pointe-Noire is the best-equipped port on this coast and the base for the offshore fleet, so most of what ships on this lane supports vessels and platforms working to a sailing date, not a delivery date.

Typical transit
28–34 days by sea to Pointe-Noire · 34–42 days LCL with transshipment · 6–8 days by air into Pointe-Noire or Brazzaville
Freight
Sea freight from Jebel Ali to Pointe-Noire, around the Cape · Rail and road inland to Brazzaville · Air freight where the schedule is tighter
Incoterms 2020
CIF Pointe-Noire · DAP to the buyer’s site · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Pre-shipment verification for regulated goods · Import declaration domiciled with the buyer’s bank · Documents in French · Certificate of Origin, Dubai Chamber attested
Request an export quote WhatsApp usEmail sales@indushydraulics.me
Fig. 01 · Export lane DXB → CGMercator · WGS 84
GABONEQ. GUINEAPOINTE-NOIRE · PORTBRAZZAVILLEDOLISIEOUESSONKAYIOWANDOIMPFONDOMOSSENDJO10°E12°E14°E16°E18°E20°E4°S2°S0°2°N4°NN200 KMSEA · CAPE · 12,030 KM · FROM JEBEL ALI · DXB
Port of entryDelivery citysea · cape corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea, via the Cape
Port of entry
Pointe-Noire
Transit
28–34 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Republic of the Congo prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Republic of the Congo

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp
01

Hoses & Fittings supplier in Republic of the Congo

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges
A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front
02

Industrial Hoses supplier in Republic of the Congo

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges
A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block
03

Lifting & Rigging supplier in Republic of the Congo

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges
A group of oilfield hoses — a coiled rotary drilling hose with a forged coupling, an armoured flexible line with a flange end and a red hose with a hammer union, a safety clamp in front
04

Oil & Gas Hoses supplier in Republic of the Congo

5 ranges

Specialty hoses for upstream oil & gas — drilling, well control, well service / intervention, tensioner / compensator, and low-pressure oilfield service. Continental ContiTech and Gates.

A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve
06

Oilfield Valves supplier in Republic of the Congo

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges
A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front
07

Flow Iron & Wellhead supplier in Republic of the Congo

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges
A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body
08

Valves & Manifolds supplier in Republic of the Congo

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front
09

Blowout Preventers (BOP) supplier in Republic of the Congo

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box
10

Instrumentation & Controls supplier in Republic of the Congo

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges
A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid
11

Well Testing Equipment supplier in Republic of the Congo

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges
A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side
12

Fracturing Equipment supplier in Republic of the Congo

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges
A skid-mounted cementing unit with twin triplex pumps, mixing and displacement tanks and a control cabin
13

Cementing Equipment supplier in Republic of the Congo

7 ranges

Skid-, trailer- and truck-mounted cementing packages — single & multiplex skid, ATEX/Zone 2, CE & GOST options, automatic density control, data acquisition.

A skid-mounted triplex mud pump with its electric motor, beside a mud manifold of gate valves on a frame
14

Drilling & Workover Systems supplier in Republic of the Congo

7 ranges

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

A group of hydraulic pumps on a studio backdrop — a variable-displacement axial piston pump with its swashplate control head, an external gear pump, a vane pump cartridge, and a splined drive shaft and cover plate laid in front
16

Hydraulic Pumps supplier in Republic of the Congo

7 ranges

Axial piston, vane and gear hydraulic pumps — Bosch Rexroth A10VSO variable displacement from 45 to 100 cm³/rev and the PGH4 internal gear pump, with Parker T6C and T7B fixed-displacement vane pumps for machine-tool duty.

A group of double-acting hydraulic cylinders — a tie-rod cylinder with its chrome rod part extended, a heavy welded cylinder with a bronze-bushed clevis eye, a short flange-mount cylinder, and a rod eye, mounting bracket and clevis pin in front
18

Hydraulic Cylinders supplier in Republic of the Congo

4 ranges

Double-acting hydraulic cylinders — Bosch Rexroth CDT3 tie-rod cylinders to ISO 6020-2 (160 bar), configured by bore, rod, stroke and mounting, such as 63/45 × 200 mm with clevis mounting and 100/70 × 500 mm with foot mounting.

A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets
20

Hydraulic Tools & Bolting supplier in Republic of the Congo

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges
Lay flat hose coils in blue, red, yellow and green, a black roll in a steel frame, suction hose, camlock coupling and clamp
21

Lay Flat Hoses supplier in Republic of the Congo

7 ranges

TPU, NBR and PVC lay flat hoses for dewatering, frac water, well risers, fuel, drinking water, concrete and slurry, jacketed fire hose, and suction hose for the pump side.

Export quote · CG

Send the part list for Republic of the Congo

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Republic of the Congo

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Republic of the Congo are declared under.

Freight

Three ways in, priced per shipment

Sea, FCL28–34 days
Jebel Ali to Pointe-Noire, around the CapeDefault for most orders
Air freight6–8 days
DXB to BZV or PNRWhen the line is down
Sea, LCL34–42 days
Consolidated, with transshipmentSmall mixed orders

Sequence

How an order to Republic of the Congo works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once accepted, verification and the French document set are arranged before the container is loaded.
  4. 04Goods sail from Jebel Ali, and you get the paperwork and tracking together.

Industries

Who we supply in Republic of the Congo

A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset
oil · gas

Oil & Gas in Republic of the Congo

Wellhead, valves, choke and kill hose and high-pressure fittings for the deep-water Moho fields and other offshore production off Pointe-Noire, the Djéno crude terminal, and shorebase and service-contractor workshops in Pointe-Noire.

Industry page
A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon
marine

Marine & Offshore in Republic of the Congo

Deck machinery, crane and winch hydraulics for the offshore supply fleet based at Pointe-Noire, and container and terminal handling hydraulics for the port’s general cargo berths.

Industry page
An excavator’s boom cylinders and hydraulic hoses on a construction site, a hazy city skyline behind
construction

Construction in Republic of the Congo

Excavator, crane and batching-plant hydraulics for road, port and building contracts around Pointe-Noire and Brazzaville and along the corridor linking them, including Dolisie and Nkayi.

Industry page
Close-up of a mining shovel’s hydraulic boom cylinders and hoses as it loads a haul truck in an open-pit mine
mining

Mining in Republic of the Congo

Dust-rated valves, four-spiral hose and crusher-duty components for quarry and aggregate plant, and for potash development in the Kouilou region north of Pointe-Noire.

Industry page
Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath
power

Power & Energy in Republic of the Congo

Gas-turbine and auxiliary hydraulics for the gas-fired power station at Djéno near Pointe-Noire, and gate operators and governor hydraulics for hydropower serving Brazzaville and the interior.

Industry page
A glowing steel strip passing through a hot rolling mill stand with its hydraulic cylinders and tubing
steel

Steel & Metals in Republic of the Congo

High-force cylinders, servo valves and fittings for fabrication and repair yards in Pointe-Noire that maintain offshore, marine and process plant, and for metal fabrication shops in Brazzaville.

Industry page

Brands stocked for Republic of the Congo

Delivery coverage

Cities and sites we deliver to in Republic of the Congo

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

  • Brazzaville

    Brazzaville

  • Dolisie

    Niari

  • Ouesso

    Sangha

  • Nkayi

    Bouenza

  • Owando

    Cuvette

  • Impfondo

    Likouala

  • Mossendjo

    Niari

  • Pointe-Noire

    Pointe-Noire

  • Djéno

    Kouilou

  • Madingou

    Bouenza

  • Sibiti

    Lékoumou

  • Gamboma

    Plateaux

Questions we get asked

Supplying Republic of the Congo, in detail

01

How long does shipping from Dubai to Pointe-Noire take?

Typically 28–34 days by sea in a full container from dispatch, because the routing runs around the Cape of Good Hope. Consolidated LCL with transshipment takes 34–42 days. When a line is down, air freight from Dubai into Pointe-Noire (PNR) or Brazzaville (BZV) runs 6–8 days and is quoted per shipment.

02

Which documents clear customs in the Republic of the Congo?

Pre-shipment verification for regulated goods by the appointed inspection body, an import declaration domiciled with the buyer’s bank, the invoice and packing list in French, and a Certificate of Origin attested by the Dubai Chamber. The descriptions have to agree across the invoice, the packing list and the declaration. We prepare the set before the container loads.

03

Can you supply the offshore supply base at Pointe-Noire?

Yes. API 6A wellhead and valves, API 16C choke and kill hose, high-pressure fittings and NACE MR0175 documentation where the contract requires it. Makes include TechnipFMC, Cameron (SLB), SPM, Anson, Stream-Flo and WOM. Everything discharges at Pointe-Noire, close to the shorebases serving the offshore fields, so there is no coastal transfer to plan.

04

Can you meet a vessel’s sailing date at Pointe-Noire?

Tell us the vessel schedule at enquiry and we will say whether the window can be met before taking the order. For marine work the deadline is the departure, and a part that arrives after the vessel sails has missed entirely. Where sea freight cannot make it, air freight into Pointe-Noire runs 6–8 days and is quoted per shipment.

05

How do goods reach Brazzaville from Pointe-Noire?

By rail or road from Pointe-Noire, on DAP terms to your site. The inland leg is quoted rather than estimated, since it varies with the rail schedule. For urgent items, air freight from Dubai lands directly in Brazzaville (BZV) in 6–8 days and avoids the inland leg.

06

Can you deliver to Dolisie, Ouesso and the northern departments?

Yes, on DAP terms. Dolisie and Nkayi lie on the corridor between Pointe-Noire and Brazzaville; Ouesso and Impfondo are long legs from the coast. Each is quoted against your actual address rather than estimated. Tell us the delivery point at quotation and the freight figure will include it.

07

What do you need from us before shipping to Congo?

The import declaration, domiciled with your bank before shipment, and the delivery address. Once it is in place, pre-shipment verification for regulated lines and the French document set are arranged before the container is loaded. For vessel or rig work, also send the sailing or mobilisation date, so we can say up front whether it can be met.

08

Can you make up hydraulic hose assemblies for vessels and rigs?

Yes. Assemblies are cut, crimped and pressure-tested in Dubai and shipped as finished items, each tagged with the hose, the fittings and the test date. For deck machinery, cranes and winches on the Pointe-Noire fleet, a ready-to-fit assembly avoids a crimping job alongside. Send the hose specification, end fittings, length and orientation.

09

Which standards do you supply hose and fittings to for Republic of the Congo?

We quote to the standard on your enquiry: SAE J517 and EN 853 or EN 856 hydraulic hose, API 7K drilling hose, API 6A and 16C pressure-control equipment, and ISO and SAE adapters. Material and test certificates come from the mill or our test bench where the order calls for them. If a requested standard does not match the product, we flag it at quotation.

10

Do you ship small mixed orders to Pointe-Noire?

Yes, by consolidated LCL with transshipment, typically 34–42 days. It suits small mixed orders of fittings, adapters and hose that do not justify a full container. The same French document set and pre-shipment verification apply. When a single item is urgent, it can go by air while the rest of the order follows by sea.

11

How do we request a quotation from Congo-Brazzaville?

Send the line list with part numbers or specifications, quantities, the delivery address in Pointe-Noire, Brazzaville or elsewhere, and any vessel date. We quote in USD on CIF Pointe-Noire, DAP, FOB Jebel Ali or EXW Dubai terms, confirm which lines need pre-shipment verification and state the transit by mode. Lead time is quoted per consignment.

Next step

Shipping to Republic of the Congo?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

WhatsApp usEmail the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · CG

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets