Skip to content
Lane DXB → TGRépublique togolaise

Export from Dubai

TG

Hydraulic & industrial hose supplier in Togo

Lomé is one of the few deep-water ports on this stretch of the West African coast and a transshipment hub in its own right, so Togo is reached on mainline sailings round the Cape — four to five weeks from Jebel Ali. The same port is the head of the corridor north into Burkina Faso, Niger and Mali, which means much of what lands in Lomé is not for Togo at all. Whether a consignment is entered for Togo or declared in transit is decided before it sails, because converting one into the other afterwards costs a trip through customs.

Typical transit
Typically 26–32 days by sea from dispatch
Freight
Sea freight from Jebel Ali to Lomé, via the Cape · Road onward from Lomé on the northern corridor · Air freight into Lomé where the schedule is tighter
Incoterms 2020
CIF Lomé · DAP to the buyer’s site · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Customs declaration through the single window, for import or for transit · Commercial documents in French · Cargo tracking note where the booking requires one · Certificate of Origin, Dubai Chamber attested
Fig. 01 · Export lane DXB → TGMercator · WGS 84
GHANABENINLOMÉ · PORTKPALIMÉATAKPAMÉSOKODÉKARAMANGODAPAONG2°W0°2°E4°E6°N8°N10°NN100 KMSEA VIA THE CAPE · 13,910 KM · FROM JEBEL ALI · DXB
Port of entryDelivery citysea via the cape corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea, via the Cape
Port of entry
Lomé
Transit
26–32 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Togo prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 26 clusters · 409 ranges

What we supply to Togo

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Industrial specialty lubricants — greases, pastes, compounds, anti-friction coatings, and oils for hydraulic, bearing, gear, and assembly service.

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Gate, globe, check, ball, butterfly, cryogenic, control and safety valves to API 600, 602, 6D, 594 and 609 and ASME B16.34, NPS 1/2" to 88", Class 150 to 4500.

Pneumatic cylinders, air valves and manifolds, FRL air preparation, tubing, fittings, grippers, vacuum and air motors from Parker, SMC, Wilkerson, Norgren, ARO, Destaco and other makers.

Anchor chain in Grades U1 to U3 and offshore mooring chain in ORQ and R3 to R5, joining shackles and swivels, ship and offshore anchors, chasers, deck fittings and mooring buoys — each size under an Indus part number, supplied from Dubai with class certificates on request.

Finned tubes for air coolers, economisers and fired heaters; seamless carbon, alloy and stainless boiler and heat-exchanger tubes; U-bend tubes; copper, brass and copper-nickel condenser tubes; and the tube sheets, baffles and exchangers they go into. Each size has an Indus part number, with mill test certificates on request.

Export quote · TG

Send the part list for Togo

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Togo

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Togo are declared under.

Freight

Three ways in, priced per shipment

Sea, FCL26–32 days
Jebel Ali to Lomé, via the CapeDefault for most orders
Air freight4–6 days
DXB to LFWWhen the line is down
Sea, LCL30–38 days
Consolidated, with transshipmentSmall mixed orders

Sequence

How an order to Togo works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once accepted, we agree whether the consignment is entered for Togo or declared in transit, and prepare the French document set to match before the container is loaded.
  4. 04Goods sail from Jebel Ali, and you get the paperwork and tracking together.

Industries

Who we supply in Togo

Delivery coverage

Cities and sites we deliver to in Togo

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

15 locations listed

  • Lomé

    Maritime

  • Aného

    Maritime

  • Kpémé

    Maritime

  • Hahotoé

    Maritime

  • Tsévié

    Maritime

  • Tabligbo

    Maritime

  • Kpalimé

    Plateaux

  • Notsé

    Plateaux

  • Atakpamé

    Plateaux

  • Sotouboua

    Centrale

  • Sokodé

    Centrale

  • Bassar

    Kara

  • Kara

    Kara

  • Mango

    Savanes

  • Dapaong

    Savanes

Questions we get asked

Supplying Togo, in detail

01

Do you have a branch in Togo?

No. Togo is supplied from our Dubai warehouse by sea into Lomé, with the French documents prepared before the container is loaded.

02

Import or transit — what is the difference?

An import is entered and cleared in Togo. A transit consignment is declared through Togo to a country beyond it and cleared there. The declaration is chosen before the goods sail, because converting one into the other at the port costs a trip through customs.

03

Can you ship to Burkina Faso, Niger or Mali through Lomé?

Yes, where the corridor is operating for the goods. Lomé is the head of the road north to the Sahel; we quote the inland leg per consignment and confirm the routing against what is actually crossing.

04

Do the documents have to be in French?

Yes, and they have to agree with each other. A description that differs between the invoice and the declaration is the commonest cause of delay at Lomé.

05

Can you supply the phosphate operations?

Yes. Abrasion-resistant hose, high-cycle cylinders and dust-rated fittings for the mine at Hahotoé and the processing plant at Kpémé, delivered DAP to the site.

06

Why does sea freight take a month?

Because the routing is around the Cape of Good Hope. Lomé’s mainline calls keep it at the short end for the region; air freight runs four to six days.

07

Can you deliver to Kara and the north?

Yes, on DAP terms to the site gate, with the road leg on the northern corridor quoted rather than estimated.

08

Do you crimp hose assemblies before dispatch?

Yes. Assemblies are crimped and pressure-tested in Dubai and shipped as finished items, tagged with the hose, the fitting and the test date.

From the blog

Guides for buyers in Togo

Next step

Shipping to Togo?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · TG

No account needed. We reply from the Dubai export desk.

Other export markets · 136 destinations

We run the same lane from Dubai to 135 other markets

All export markets