Skip to content

Counterbalance & Load-Holding Valves

40 SKUs1 brands

Showing 1–40 of 40 SKUs

Questions we get asked

Counterbalance valve questions

01Why does a counterbalance valve need a higher setting than the load?
The setting must stay above the highest pressure the load can induce, so the valve never cracks open on the load alone. A common rule is about 30% above that pressure; the pilot then opens it to lower the load.
02Will a counterbalance valve stop a load drifting?
Yes, when it is set correctly. The small leakage in the data is measured at reseat, about 85% of the cracking pressure; a valve set 30% above the load never sees more than about 77% of cracking, where it holds the load without drift. Cranes and man-lifts rely on this. A load that drifts through a counterbalance valve usually means a damaged seat, and the valve should be replaced.