Lane DXB → ZM

Export from Dubai

Hydraulic & industrial hose supplier in Zambia

Indus Hydraulics supplies Zambia from Dubai by sea and road: containers discharge at Durban and run north on the North-South Corridor through Chirundu, typically 28–38 days, or come through Dar es Salaam and Nakonde in 30–40. Air freight reaches Lusaka in four to six days. Conformity for regulated lines is verified in Dubai before shipment, and the transit documents for South Africa and Zimbabwe are arranged with it, because on this lane the inland leg is longer than the sea leg.

Typical transit: Typically 28–38 days via Durban and Chirundu · 30–40 days via Dar es Salaam and Nakonde · Air 4–6 days into Lusaka
Freight: Sea to Durban then the North-South Corridor through Chirundu · Dar es Salaam then road through Nakonde as an alternative · Air freight into Lusaka where the schedule is tighter
Incoterms 2020: DAP Lusaka or the buyer’s site · CIF Durban · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation: Conformity documents for regulated goods, verified before shipment · Transit documents for South Africa and Zimbabwe · Certificate of Origin, Dubai Chamber attested

Request an export quote WhatsApp us Email sales@indushydraulics.me

Fig. 01 · Export lane DXB → ZMMercator · WGS 84

Border crossingDelivery citysea + road corridor from JEBEL ALI · DXB

Origin: Jebel Ali · Dubai
Primary mode: Sea + road
Border crossing: Chirundu
Transit: 28–38 days
Quoted in: USD
Docs prepared: Before the vessel sails

Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Zambia prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Zambia

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp

Hoses & Fittings supplier in Zambia

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front

Industrial Hoses supplier in Zambia

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges

A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block

Lifting & Rigging supplier in Zambia

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges

A group of oilfield hoses — a coiled rotary drilling hose with a forged coupling, an armoured flexible line with a flange end and a red hose with a hammer union, a safety clamp in front

Oil & Gas Hoses supplier in Zambia

5 ranges

Specialty hoses for upstream oil & gas — drilling, well control, well service / intervention, tensioner / compensator, and low-pressure oilfield service. Continental ContiTech and Gates.

A group of Molykote lubricant packaging — a steel drum and a plastic pail behind, paste tins, a grease cartridge, two tubs and a sachet arranged in front on a studio backdrop

Lubricants supplier in Zambia

6 ranges

Industrial specialty lubricants — greases, pastes, compounds, anti-friction coatings, and oils for hydraulic, bearing, gear, and assembly service.

A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve

Oilfield Valves supplier in Zambia

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges

A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front

Flow Iron & Wellhead supplier in Zambia

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges

A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body

Valves & Manifolds supplier in Zambia

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front

Blowout Preventers (BOP) supplier in Zambia

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box

Instrumentation & Controls supplier in Zambia

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges

A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid

Well Testing Equipment supplier in Zambia

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges

$A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side$

Fracturing Equipment supplier in Zambia

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges

A skid-mounted cementing unit with twin triplex pumps, mixing and displacement tanks and a control cabin

Cementing Equipment supplier in Zambia

7 ranges

Skid-, trailer- and truck-mounted cementing packages — single & multiplex skid, ATEX/Zone 2, CE & GOST options, automatic density control, data acquisition.

A skid-mounted triplex mud pump with its electric motor, beside a mud manifold of gate valves on a frame

Drilling & Workover Systems supplier in Zambia

7 ranges

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

A skid-mounted stimulation pumping unit with a diesel engine, a triplex pump and a blending tank

Stimulation Equipment supplier in Zambia

5 ranges

Acid / N₂ stimulation packages — nitrogen pumping units, transfer pumps, acid tanks, stimulation batch mixers and pumping units. ATEX, CE, GOST.

A group of hydraulic pumps on a studio backdrop — a variable-displacement axial piston pump with its swashplate control head, an external gear pump, a vane pump cartridge, and a splined drive shaft and cover plate laid in front

Hydraulic Pumps supplier in Zambia

7 ranges

Axial piston, vane and gear hydraulic pumps — Bosch Rexroth A10VSO variable displacement from 45 to 100 cm³/rev and the PGH4 internal gear pump, with Parker T6C and T7B fixed-displacement vane pumps for machine-tool duty.

A group of hydraulic power-unit accessories — a blue bladder accumulator, a return-line filter housing with its pleated element stood alongside, a perforated suction strainer and a lever ball valve, with O-rings, rod seals, a back-up ring and a wear ring laid in front

Seals & Accessories supplier in Zambia

4 ranges

Hydraulic power unit accessories — HYDAC Betamicron 10 µm pressure and return-line filter elements, and HYDAC SB330 bladder accumulators in 4 and 10 litre sizes for 330 bar.

A group of double-acting hydraulic cylinders — a tie-rod cylinder with its chrome rod part extended, a heavy welded cylinder with a bronze-bushed clevis eye, a short flange-mount cylinder, and a rod eye, mounting bracket and clevis pin in front

Hydraulic Cylinders supplier in Zambia

4 ranges

Double-acting hydraulic cylinders — Bosch Rexroth CDT3 tie-rod cylinders to ISO 6020-2 (160 bar), configured by bore, rod, stroke and mounting, such as 63/45 × 200 mm with clevis mounting and 100/70 × 500 mm with foot mounting.

A group of hydraulic motors — three black orbital motors with SAE A, square and wheel-mount flanges and keyed, tapered and splined shafts, and a cast-iron gear motor, with a splined shaft and O-rings in front

Hydraulic Motors supplier in Zambia

2 ranges

Low-speed high-torque orbital motors and gear motors from Fluidyne, Dynamic Fluid Components, Char-Lynn and Cross, listed by series with every part number.

A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets

Hydraulic Tools & Bolting supplier in Zambia

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges

Lay flat hose coils in blue, red, yellow and green, a black roll in a steel frame, suction hose, camlock coupling and clamp

Lay Flat Hoses supplier in Zambia

7 ranges

TPU, NBR and PVC lay flat hoses for dewatering, frac water, well risers, fuel, drinking water, concrete and slurry, jacketed fire hose, and suction hose for the pump side.

Export quote · ZM

Send the part list for Zambia

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

Standards

Standards we supply and certify against for Zambia

Standard	Types	Applies to
EN 853	1SN · 2SN	Wire-braid hydraulic hose
EN 856	4SP · 4SH	Spiral-wire hydraulic hose
EN 857	1SC · 2SC	Compact wire-braid hose
SAE J517	100R1 · R2 · R12 · R13 · R15	SAE hydraulic hose series
ISO 18752	Grades A–D	Performance-based hose classification
API 16C	Choke & kill	Well control flexible lines
API 7K	Rotary & vibrator	Drilling hose
API 6A	PSL 1–4	Wellhead equipment
DIN 2353	L · S series	Bite-type tube couplings
ISO 8434-1	24° cone	Metric tube connections
ISO 6162 / 12151	Code 61 · 62	SAE flange and hose connections
EN 14420-5	Clamped	Industrial hose couplings
NACE MR0175	ISO 15156	Sour-service materials
ISO 9001:2015	Certified	Quality management system

Customs

Tariff lines we declare under

4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
7307.91Flanges, iron or steelSAE and API flanges
7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
8413.60Rotary positive displacement pumpsGear and vane pumps
8412.21Hydraulic power engines, linear actingCylinders
3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Zambia are declared under.

Freight

Three ways in, priced per shipment

Sea + road, via Durban28–38 days

North-South Corridor through ChirunduDefault for most orders

Air freight4–6 days

DXB to LUNWhen the line is down

Sea + road, via Dar30–40 days

Dar es Salaam corridor through NakondeAlternative when Durban is congested

Sequence

How an order to Zambia works

01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
03Once accepted, conformity and transit documents for the whole route are arranged before the container is loaded.
04Goods sail to Durban and move north by road, with the paperwork and tracking together.

Industries

Who we supply in Zambia

mining

Mining in Zambia

Four-spiral hose, slurry valves, high-cycle cylinders and crusher-duty components for the Copperbelt mines around Kitwe, Chingola, Mufulira and Luanshya, and the North-Western mines at Solwezi and Kalumbila.

Industry page

Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath

power

Power & Energy in Zambia

Gate operators and governor hydraulics for the Kariba North Bank and Kafue Gorge hydropower stations, and hose, valves and cylinders for the coal-fired plant at Maamba.

Industry page

construction

Construction in Zambia

Excavator, crane and batching-plant hydraulics for road, bridge and mine-infrastructure contracts around Lusaka, the Copperbelt and the North-Western Province.

Industry page

steel

Steel & Metals in Zambia

High-force cylinders, servo valves and high-temperature hose for the copper smelters, refineries and rod mills of the Copperbelt, and for steel rolling around Lusaka and Kafue.

Industry page

A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset

oil · gas

Oil & Gas in Zambia

Loading hose, valves and fittings for the fuel import terminals and depots around Ndola and Lusaka, and the pipeline that brings product from Dar es Salaam to the Copperbelt.

Industry page

A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon

marine

Marine & Offshore in Zambia

Reach-stacker, crane and container handling hydraulics for inland terminals and rail yards such as Kapiri Mposhi, plus lifting slings and shackles for cargo handling.

Industry page

Delivery coverage

Cities and sites we deliver to in Zambia

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

14 locations listed

Lusaka
Lusaka Province
Kitwe
Copperbelt
Ndola
Copperbelt
Solwezi
North-Western
Livingstone
Southern Province
Nakonde
Muchinga
Kabwe
Central Province
Chingola
Copperbelt
Mufulira
Copperbelt
Luanshya
Copperbelt
Kalumbila
North-Western
Kapiri Mposhi
Central Province
Maamba
Southern Province
Chirundu
Southern Province

Questions we get asked

Supplying Zambia, in detail

Who supplies hydraulic hose and fittings to Zambia from Dubai?

Indus Hydraulics ships hydraulic hose, fittings, adapters, slurry valves and industrial hose from Dubai to Zambia. The default lane is sea to Durban and road up the North-South Corridor through Chirundu, typically 28–38 days; Dar es Salaam and the Nakonde crossing is the alternative at 30–40 days. Air freight reaches Lusaka in four to six days.

Why does shipping to Zambia take five weeks?

Because the inland leg is longer than the sea leg. Durban to Lusaka is around two thousand kilometres by road and crosses South Africa and Zimbabwe as transit countries before the import clearance at Chirundu. The sea leg from Jebel Ali is the quick part. Planning orders around that, rather than against it, is what keeps the Copperbelt supplied.

Should our order go via Durban or Dar es Salaam?

Durban for most orders, through Chirundu in typically 28–38 days. Dar es Salaam and the road through Nakonde, at 30–40 days, is the alternative when Durban is congested or the delivery is in the north of the country. When the order is large enough for the difference to matter, we quote both routings side by side on the same Estimate.

Which documents are needed to ship hydraulic parts to Zambia?

Conformity documents for regulated goods, verified by an appointed inspection body before the vessel sails; transit documents for South Africa and Zimbabwe from the nominated forwarder; the import declaration lodged by the consignee or clearing agent before arrival; a Certificate of Origin attested by Dubai Chamber; and material and test certificates where the order calls for them.

Can you deliver to Kitwe, Chingola and Solwezi?

Yes, on DAP terms to the mine gate. Kitwe, Chingola and Solwezi add a day or two beyond Lusaka, and that leg is quoted rather than estimated. Ndola, Mufulira, Luanshya and Kalumbila are handled the same way. Giving us the mine or plant address at quotation means the transit documents and the delivery leg are set up once.

Can you supply Copperbelt mining operations directly?

Yes. Slurry valves, four-spiral hose, high-cycle cylinders and crusher-duty components are the bulk of what we ship, with material certificates where the contract calls for them. Process hose for leach and reagent duty is specified against the medium, concentration and temperature you give us, not the pressure rating alone. We supply the mine or its maintenance contractor.

Can you quote a mine shutdown package for Zambia?

Yes. Send the outage scope ahead of time and we quote it as one package, with the delivery date set against the shutdown rather than against dispatch. Because Copperbelt maintenance runs to planned cycles, the bulk can go by the cheapest sea-and-road routing, and anything genuinely urgent goes by air separately, priced as the exception.

Is air freight to Lusaka worth it?

For a plant-down, yes: four to six days from Dubai into Kenneth Kaunda International in Lusaka. For a planned order, sea and road cost a fraction of air, and the conformity verification takes the same time either way. The usual split is the scheduled consumables by sea and road, and the single assembly stopping a crusher or loader by air.

Do you crimp and pressure-test hose assemblies before shipping to Copperbelt mines?

Yes. Hose assemblies are cut to length, crimped and pressure-tested in Dubai and shipped as finished items, tagged with the hose, the fitting and the test date. On a five-week lane, a tagged assembly that can be reordered by reference saves a measurement trip, and it arrives ready to fit rather than needing crimping on site.

Which hose and fitting standards are used on Zambian mine equipment?

High-pressure circuits on drills, loaders and haul trucks typically use four-spiral hose to EN 856 or ISO 18752, with SAE J517 and EN 853 hose on lower-pressure lines. Fittings are supplied in BSP, JIC, ORFS, NPT and metric threads. On abrasive Copperbelt duty, cover specification and guarding often matter more than the pressure class.

Do you supply lifting and rigging gear to the Copperbelt?

Yes. Wire rope and chain slings, shackles, hooks and rigging hardware are supplied for shutdown, plant maintenance and construction work, with test certificates where the order calls for them. Whether a particular line needs conformity verification is confirmed from the part numbers at quotation, and it is then verified with the rest of the consignment in Dubai.

How do I get a quotation from Zambia?

Send the part numbers or specification, quantities, the delivery town and your preferred Incoterm: DAP Lusaka or to site, CIF Durban, FOB Jebel Ali or EXW Dubai for your own forwarder. We quote in USD, which keeps the customs valuation consistent across the transit countries, on a written Estimate that states the routing and freight mode.

From the blog

Guides for buyers in Zambia

Fittings by industry

Copper mine hydraulic fittings: what the haul fleet and the plant each need

Two different hydraulic worlds share a fence line. The haul fleet fails by abrasion and vibration; the concentrator fails by slurry and washdown, and they want different answers.

4 min read

Next step

Shipping to Zambia?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

WhatsApp us Email the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · ZM

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets

Southern Africa

South Africa Namibia BotswanaZambia — this pageZimbabwe