Skip to content
Lane DXB → JOالمملكة الأردنية الهاشمية

Export from Dubai

JO

Hydraulic & industrial hose supplier in Jordan

Jordan is the one market beyond the GCC that a truck reaches from Dubai: across Saudi Arabia to the Al-Omari crossing and on to Amman. The alternative is sea into Aqaba, which needs no canal transit at all. Aqaba is a Special Economic Zone with its own customs treatment, so whether goods are delivered into the zone or onward into the rest of the country changes the paperwork — and that is settled before the consignee is named, not at the gate.

Typical transit
Typically 5–15 working days from dispatch
Freight
Road freight across Saudi Arabia to Al-Omari · Sea freight into Aqaba with no canal transit · Air freight into Amman where the schedule is tighter
Incoterms 2020
DAP to the buyer’s site · CIF Aqaba · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Saudi transit documents for the road leg · JSMO conformity where a line is a regulated product · Customs declaration in Jordan or in the Aqaba zone · Certificate of Origin, Dubai Chamber attested
Fig. 01 · Export lane DXB → JOMercator · WGS 84
ISRAELPALESTINEAL-OMARIAMMANIRBIDMAFRAQAZRAQKARAKMA’ANAQABARUWAISHED34°E36°E38°E40°E30°N32°NN100 KMROAD · VIA SAUDI · 2,080 KM · FROM JEBEL ALI · DXB
Border crossingDelivery cityroad · via saudi corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Road, via Saudi Arabia
Border crossing
Al-Omari
Transit
5–15 working days
Quoted in
USD
Docs prepared
Before dispatch, in Dubai
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Jordan prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 26 clusters · 409 ranges

What we supply to Jordan

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Industrial specialty lubricants — greases, pastes, compounds, anti-friction coatings, and oils for hydraulic, bearing, gear, and assembly service.

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Gate, globe, check, ball, butterfly, cryogenic, control and safety valves to API 600, 602, 6D, 594 and 609 and ASME B16.34, NPS 1/2" to 88", Class 150 to 4500.

Pneumatic cylinders, air valves and manifolds, FRL air preparation, tubing, fittings, grippers, vacuum and air motors from Parker, SMC, Wilkerson, Norgren, ARO, Destaco and other makers.

Anchor chain in Grades U1 to U3 and offshore mooring chain in ORQ and R3 to R5, joining shackles and swivels, ship and offshore anchors, chasers, deck fittings and mooring buoys — each size under an Indus part number, supplied from Dubai with class certificates on request.

Finned tubes for air coolers, economisers and fired heaters; seamless carbon, alloy and stainless boiler and heat-exchanger tubes; U-bend tubes; copper, brass and copper-nickel condenser tubes; and the tube sheets, baffles and exchangers they go into. Each size has an Indus part number, with mill test certificates on request.

Export quote · JO

Send the part list for Jordan

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Jordan

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Jordan are declared under.

Freight

Three ways in, priced per shipment

Road freight5–15 working days
Dubai to Amman, across Saudi ArabiaDefault for most orders
Air freight1–3 days
DXB to AMMWhen the line is down
Sea, FCL12–18 days
Jebel Ali to Aqaba, via the Red SeaHeavy and project cargo

Sequence

How an order to Jordan works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once accepted, we confirm whether the consignee is inside the Aqaba zone or beyond it, check each line against the JSMO technical regulations, and raise the Saudi transit set for the road leg.
  4. 04Goods leave Dubai by road, or sail for Aqaba, and you get the paperwork and tracking together.

Industries

Who we supply in Jordan

Delivery coverage

Cities and sites we deliver to in Jordan

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

15 locations listed

  • Amman

    Amman

  • Zarqa

    Zarqa

  • Sahab

    Amman

  • Irbid

    Irbid

  • Mafraq

    Mafraq

  • Salt

    Balqa

  • Madaba

    Madaba

  • Azraq

    Zarqa

  • Karak

    Karak

  • Ghor Al Safi

    Karak

  • Al-Hasa

    Tafilah

  • Ma’an

    Ma’an

  • Eshidiya

    Ma’an

  • Aqaba

    Aqaba

  • Ruwaished

    Mafraq

Questions we get asked

Supplying Jordan, in detail

01

Do you have a branch in Jordan?

No. Jordan is supplied from our Dubai warehouse, by road across Saudi Arabia or by sea into Aqaba, with the documents prepared before dispatch.

02

How do goods reach Jordan by road?

Out of Dubai into Saudi Arabia at Al Batha, across the Kingdom under transit documents, and into Jordan at Al-Omari. The Saudi leg is in transit rather than imported, so nothing is cleared there — but the transit set has to be right or the truck waits at the first border.

03

Does the Aqaba Special Economic Zone change anything?

Yes. Goods delivered to a consignee inside the zone are treated differently from goods entering the rest of Jordan, and moving them out of the zone later is a customs event of its own. Tell us where the goods will be used and we name the consignee and the declaration to match.

04

Do JSMO regulations apply to hydraulic equipment?

Some lines may be covered by a technical regulation of the Jordan Standards and Metrology Organization and most will not. We check each line at quotation and say which, rather than charging for conformity work nobody needs.

05

Road or sea?

Road for most orders, because it is door to door. Sea into Aqaba for heavy or oversize cargo, and for sites near the port — Aqaba is on the Red Sea, so the vessel does not transit Suez.

06

Can you supply the phosphate and potash operations?

Yes. Abrasion-resistant hose, high-cycle cylinders and dust-rated fittings for the mines at Eshidiya and Al-Hasa and the Dead Sea potash works, delivered DAP to the site gate.

07

How long does delivery take?

Typically five to fifteen working days from dispatch, which is the band our shipping policy publishes for the wider Middle East. The spread is mostly the Saudi transit; air freight into Amman is one to three days.

08

Can you deliver to the industrial estates in Irbid and Sahab?

Yes, on DAP terms to the gate. The road leg ends in Amman for most consignments and the final run north or south is part of the same quotation.

From the blog

Guides for buyers in Jordan

Next step

Shipping to Jordan?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · JO

No account needed. We reply from the Dubai export desk.

Other export markets · 136 destinations

We run the same lane from Dubai to 135 other markets

All export markets