Modular Spreader Frames — 10 t to 90 t, EN 13155

Adjustable four-point spreader frames rated 10 t to 90 t: four corner units joined by the same bolt-in struts as the modular spreader beams, set square or rectangular up to 14 m × 14 m. One fleet of struts builds beams and frames.
Key features
- Product type: Modular spreader frame
- Pattern / standard: EN 13155
- Size range: Up to 4.5 × 4.5 m (10 t) to 14 × 14 m (90 t)
- Working load limit: 10–90 t (frame); quarter of the frame WLL per corner
- Product type
- Modular spreader frame
- Material
- Steel corner units with bolt-in modular struts
Product description
A spreader frame lifts a load at four points with every bottom sling vertical. This one is modular: four corner units are joined by struts from the modular spreader beam range of the matching size, so a fleet that already holds the struts only needs the corner units to build frames. The frame can be set square or rectangular to suit the load, and changed for the next one.
Sizes
| Part number | Frame WLL | WLL per corner | Max. size | Fasteners per joint | Torque |
|---|---|---|---|---|---|
| IH-LR-BH-MSF-10 | 10 t | 2.5 t | 4.5 × 4.5 m | 4 x M10 × 30 grade 8.8 | 80 Nm |
| IH-LR-BH-MSF-17 | 17 t | 4.25 t | 6.5 × 6.5 m | 4 x M12 × 35 grade 8.8 | 100 Nm |
| IH-LR-BH-MSF-30 | 30 t | 7.5 t | 8 × 8 m | 4 x M20 × 50 grade 8.8 | 160 Nm |
| IH-LR-BH-MSF-40 | 40 t | 10 t | 9 × 9 m | 4 x M20 × 50 grade 8.8 | 160 Nm |
| IH-LR-BH-MSF-70 | 70 t | 17.5 t | 11 × 11 m | in the user instructions | in the user instructions |
| IH-LR-BH-MSF-90 | 90 t | 22.5 t | 14 × 14 m | 6 x M20 × 65 grade 8.8 | 160 Nm |
The frame WLL is the most the whole frame may carry; each corner is rated a quarter of it, so with an off-centre load check that no corner exceeds its rating. The rating at each length and width the frame can be set to is given in the configuration chart in the user instructions supplied with the frame; ask us for it before you plan the lift.
Rules for use
- Load the frame only at its four corner points. Never hang a load from a strut.
- Rig the top slings within the angle the chart allows.
- Use the fasteners and torque given for the size, and a full set of struts of the matching size.
Ordering
Quote the part number, or send the load weight, its length and width between lifting points and the hook height. Struts and rigging can be quoted with the corner units.
Identification
| Parameter | Value |
|---|---|
| Product type | Modular spreader frame |
| Pattern / standard | EN 13155 |
| Sizes | 6 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 10–90 t (frame); quarter of the frame WLL per corner |
Dimensions
| Parameter | Value |
|---|---|
| Size range | Up to 4.5 × 4.5 m (10 t) to 14 × 14 m (90 t) |
Construction
| Parameter | Value |
|---|---|
| Material | Steel corner units with bolt-in modular struts |
| Fasteners | Grade 8.8 bolts, nuts and washers |
Compliance
| Parameter | Value |
|---|---|
| Certification | Declaration of conformity; user instructions with configuration chart |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-BH-MSF-10
- Span
- up to 4.5 × 4.5 m
- WLL (t)
- 10
- Tightening torque (Nm)
- 80
- Indus part no.IH-LR-BH-MSF-17
- Span
- up to 6.5 × 6.5 m
- WLL (t)
- 17
- Tightening torque (Nm)
- 100
- Indus part no.IH-LR-BH-MSF-30
- Span
- up to 8 × 8 m
- WLL (t)
- 30
- Tightening torque (Nm)
- 160
- Indus part no.IH-LR-BH-MSF-40
- Span
- up to 9 × 9 m
- WLL (t)
- 40
- Tightening torque (Nm)
- 160
- Indus part no.IH-LR-BH-MSF-70
- Span
- up to 11 × 11 m
- WLL (t)
- 70
- Tightening torque (Nm)
- —
- Indus part no.IH-LR-BH-MSF-90
- Span
- up to 14 × 14 m
- WLL (t)
- 90
- Tightening torque (Nm)
- 160
Span — Distance between the lifting points the load hangs from, as the load chart prints it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Tightening torque — Torque to tighten the bolt to, as the manufacturer states it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Modular Spreader Frames — 10 t to 90 t used for?▾
How do I read part numbers such as IH-LR-BH-MSF-10 for the Modular Spreader Frames — 10 t to 90 t?▾
What frame sizes and capacities does the Modular Spreader Frames — 10 t to 90 t cover?▾
Can I use struts I already have with the Modular Spreader Frames — 10 t to 90 t?▾
What does each corner of the Modular Spreader Frames — 10 t to 90 t carry?▾
What are the Modular Spreader Frames — 10 t to 90 t made of and bolted with?▾
Which standard and documents come with the Modular Spreader Frames — 10 t to 90 t?▾
What rigging and parts go with the Modular Spreader Frames — 10 t to 90 t?▾
What are the rules for using the Modular Spreader Frames — 10 t to 90 t?▾
Frame or two spreader beams: how does the Modular Spreader Frames — 10 t to 90 t compare?▾
Can you ship the Modular Spreader Frames — 10 t to 90 t outside the UAE?▾
What is the lead time on the Modular Spreader Frames — 10 t to 90 t?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Lifting bars for air handling units: why a pipe through the base is not lifting equipment
Many air handling units arrive with holes or fork pockets in the base frame and no lifting lugs. The bar pushed through those holes is a lifting accessory, with everything that implies: a design, a marked SWL, a certificate and periodic examination. What a proper bar set looks like, why one bar is not enough, and who has to provide it.
7 min read
Lifting & rigging
Sling angle compression force: why an angled sling pulls harder, and what it does to the load
An angled sling has to pull sideways as well as up, so it always carries more than its share of the weight. The sideways part squeezes the load between the lifting points. How to find both forces with one triangle, the mistake that doubles the compression, and how a spreader beam takes it out of the load.
6 min read

