Skip to content
IH-LR-BH-MSB-34

Modular Spreader Beam — 34 t, 1–10 m Span, up to 34 t WLL, EN 13155

Spreader BeamsContact for availability
34 t modular spreader beam: end units, bolted strut joints and upper and lower shackles, 3D render
VIEW 01·34 t modular spreader beam: end units, bolted strut joints and upper and lower shackles, 3D render

Modular spreader beam rated to 34 t, built from two end units and bolt-in struts to any span from 1 m to 10 m. The size table is the load chart: rated load and minimum top sling length at 45°, 30° and 20° sling angles for every span.

Key features

  • Product type: Modular spreader beam
  • Pattern / standard: EN 13155
  • Size range: Span 1–10 m
  • Working load limit: Up to 34 t (by span and sling angle)
Product type
Modular spreader beam
Material
Steel, bolted modular construction
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A bolt-together spreader beam rated up to 34 t, made of two end units and interchangeable struts. It can be built to any span from 1 m to 10 m in the steps of its chart, and taken apart again for transport and storage. The beam takes its load at the two end links only and works in compression, so it is light for its capacity and suits long loads lifted at two points.

Span chart

Each row is one span: the rated load at a top sling angle of 45°, 30° and 20° to the vertical, and the shortest top sling leg that keeps the angle within that limit. At 45° the full 34 t is available to a span of 4.5 m; beyond that the chart steps the load down.

The beam is certified for every configuration in its chart, so changing the span does not need a new test or certificate. Pre-use checks and periodic thorough examination still apply.

Components and bolts

Each end unit and link plate is rated 17 t, half the beam's 34 t, because the beam is modular and every component is rated on its own. With an off-centre load, check that neither end carries more than 17 t. Struts join with M20 × 50 grade 8.8 bolts, nuts and washers tightened to 160 Nm; a full set plus spares is supplied. No more than seven components in one beam, end units included.

Rules for use

  • Load the beam only at its two end links. Never hang a load from a strut.
  • Keep the top sling angle at 45° to the vertical or less, and read the chart for the angle you rig.
  • End links hang downward, toward the load; bottom slings run vertically to the load.
  • Check that no shackle or sling clashes with the beam.
  • Put the longest strut in the middle, so there is no flange joint at the centre of the beam.

Ordering

Quote the part number of the span you need from the table, or send the load weight, the distance between its lifting points and the hook height, and we will choose the size and span. Top and bottom rigging (shackles, slings and master links) can be quoted with the beam. Custom struts, special end links and tag-line points are available to order.

Identification

ParameterValue
Product typeModular spreader beam
Pattern / standardEN 13155
Sizes19

Performance

ParameterValue
Working load limitUp to 34 t (by span and sling angle)
Sling angle45° to vertical, maximum
End unit WLL17 t each end (34 t combined)

Dimensions

ParameterValue
Size rangeSpan 1–10 m

Construction

ParameterValue
MaterialSteel, bolted modular construction
Strut boltsM20 × 50 grade 8.8, 160 Nm

Compliance

ParameterValue
CertificationDeclaration of conformity; user instructions with load chart

Shipping & lead time

Lead TimeContact us for current lead time.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at