Skip to content
IH-LR-BH-TLB

Trunnion Lifting Beams & Attachments — EN 13155

Lifting BeamsContact for availability
Trunnion lifting beam with yellow round slings cradling a pipe spool
VIEW 01·Trunnion lifting beam with yellow round slings cradling a pipe spool
1 / 3

Lifting beams and attachments that pick up a load by its trunnions, including V-trunnion links and trunnion lifting attachments, for vessels, rolls, drums and other loads that rotate or upend, engineered to EN 13155.

Key features

  • Product type: Trunnion lifting beam / attachment (made to order)
  • Pattern / standard: EN 13155; ASME B30.20 / BTH-1 or DNV offshore design on request
  • Size range: Built to the load
  • Working load limit: To order
Material
Structural steel, grade to the design
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Trunnions are short shafts on the sides of a load that let it hang and turn. A trunnion beam carries hooks or V-links that take the trunnions, so the load can be lifted level or turned upright during the lift.

Trunnion lifting attachments bolt or clamp to a load that has no trunnions of its own, and V-trunnion links let a trunnion sit in a link rather than a hook.

Typical builds

  • Trunnion lifting beams
  • V-trunnion lifting links
  • Bolt-on trunnion lifting attachments
  • Upending systems for vessels and drums

What we need to quote

Send us the load weight and where its centre of gravity sits, the load's length and width, the positions of its lifting points, the crane hook height and any headroom limit, and the environment the equipment will work in (indoor, outdoor, offshore, hazardous area). A drawing, a 3D model or a photo of the load is the quickest way to start.

How it is made and certified

Engineered below-the-hook equipment is built to order. Your enquiry is reviewed by the maker's design engineers, who issue a general arrangement drawing for your approval before anything is made. Each item is designed to EN 13155, load tested before dispatch and supplied with a declaration of conformity, a test certificate and user instructions. Design calculations, material certificates, NDT records and third-party witnessed testing can be added to the order, and offshore designs to DNV standards are available on request. We confirm the lead time with the quotation.

In service

In service, the equipment gets a pre-use check before every lift and a thorough examination by an approved third party at the interval the site's authority sets: in Abu Dhabi, Code of Practice 34 sets six months for lifting accessories and twelve for lifting equipment, and in Dubai the examination is made by an EIAC-accredited inspection body. Its rated load, identification and test date are marked on it, and the user instructions state how it may and may not be rigged. Our guide to lifting equipment inspection in the UAE sets out the rules emirate by emirate.

Identification

ParameterValue
Product typeTrunnion lifting beam / attachment (made to order)
Pattern / standardEN 13155; ASME B30.20 / BTH-1 or DNV offshore design on request

Performance

ParameterValue
Working load limitTo order

Dimensions

ParameterValue
Size rangeBuilt to the load

Construction

ParameterValue
MaterialStructural steel, grade to the design
FinishPaint system to your specification; galvanized for outdoor use on request

Compliance

ParameterValue
CertificationLoad tested before dispatch; declaration of conformity

Supply

ParameterValue
SupplyMade to order from an approved general arrangement drawing
DocumentationGA drawing for approval, declaration of conformity, test certificate, user instructions

Shipping & lead time

Lead TimeContact us for current lead time.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at