C-Hooks — EN 13155

Heavy-duty C-hooks for lifting coils, rolls and sleeves through the bore, balanced for the load so it hangs level, engineered to EN 13155.
Key features
- Product type: C-hook (made to order)
- Pattern / standard: EN 13155; ASME B30.20 / BTH-1 or DNV offshore design on request
- Size range: Built to the coil or roll
- Working load limit: To order
- Material
- Structural steel, grade to the design
Product description
A C-hook lifts a coil, roll or sleeve through its bore, with the hook body reaching around the outside. It is balanced so the load hangs level when loaded and the hook hangs level when empty, which is what lets it be slid in and out of the bore quickly.
The design is set by the bore, the outside diameter, the width and the weight of the heaviest load, and a counterweight or adjustable top point can be added for a range of loads.
Typical uses
- Steel coils and wire coils
- Paper and film rolls
- Cable drums and sleeves
What we need to quote
Send us the load weight and where its centre of gravity sits, the load's length and width, the positions of its lifting points, the crane hook height and any headroom limit, and the environment the equipment will work in (indoor, outdoor, offshore, hazardous area). A drawing, a 3D model or a photo of the load is the quickest way to start.
How it is made and certified
Engineered below-the-hook equipment is built to order. Your enquiry is reviewed by the maker's design engineers, who issue a general arrangement drawing for your approval before anything is made. Each item is designed to EN 13155, load tested before dispatch and supplied with a declaration of conformity, a test certificate and user instructions. Design calculations, material certificates, NDT records and third-party witnessed testing can be added to the order, and offshore designs to DNV standards are available on request. We confirm the lead time with the quotation.
In service
In service, the equipment gets a pre-use check before every lift and a thorough examination by an approved third party at the interval the site's authority sets: in Abu Dhabi, Code of Practice 34 sets six months for lifting accessories and twelve for lifting equipment, and in Dubai the examination is made by an EIAC-accredited inspection body. Its rated load, identification and test date are marked on it, and the user instructions state how it may and may not be rigged. Our guide to lifting equipment inspection in the UAE sets out the rules emirate by emirate.
Identification
| Parameter | Value |
|---|---|
| Product type | C-hook (made to order) |
| Pattern / standard | EN 13155; ASME B30.20 / BTH-1 or DNV offshore design on request |
Performance
| Parameter | Value |
|---|---|
| Working load limit | To order |
Dimensions
| Parameter | Value |
|---|---|
| Size range | Built to the coil or roll |
Construction
| Parameter | Value |
|---|---|
| Material | Structural steel, grade to the design |
| Finish | Paint system to your specification; galvanized for outdoor use on request |
Compliance
| Parameter | Value |
|---|---|
| Certification | Load tested before dispatch; declaration of conformity |
Supply
| Parameter | Value |
|---|---|
| Supply | Made to order from an approved general arrangement drawing |
| Documentation | GA drawing for approval, declaration of conformity, test certificate, user instructions |
Shipping & lead time
What are C-Hooks used for?▾
What sizes can C-Hooks be supplied in?▾
What do I need to send for C-Hooks to be sized and quoted?▾
What working load limit do C-Hooks have?▾
Can C-Hooks be designed for offshore use?▾
What are C-Hooks made from, and what finish does it have?▾
Are C-Hooks certified, and to which standard?▾
What do C-Hooks connect to or work with?▾
How should C-Hooks be inspected and looked after?▾
How do C-Hooks differ from Bolt-On Lifting Tools?▾
Can C-Hooks be supplied to customers outside the UAE?▾
What is the lead time and how do I get a quotation for C-Hooks?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations




