Scissor Grabs — EN 13155

Heavy-duty scissor grabs that close on the load as it is lifted, for blocks, bales, kerbs and logs, engineered to EN 13155 for the load range and the grip surface.
Key features
- Product type: Scissor grab (made to order)
- Pattern / standard: EN 13155; ASME B30.20 / BTH-1 or DNV offshore design on request
- Size range: Built to the load
- Working load limit: To order
- Material
- Structural steel, grade to the design
Product description
A scissor grab is self-gripping: the weight of the load pulls the arms together, so the grip tightens as the load rises. It needs no slings and no lifting points on the load.
The jaw opening, the pad material and the grip geometry are designed for the load's size range and surface, with a latch that holds the jaws open for release.
Typical uses
- Concrete blocks and kerbs
- Stone and timber
- Bales and packaged loads
What we need to quote
Send us the load weight and where its centre of gravity sits, the load's length and width, the positions of its lifting points, the crane hook height and any headroom limit, and the environment the equipment will work in (indoor, outdoor, offshore, hazardous area). A drawing, a 3D model or a photo of the load is the quickest way to start.
How it is made and certified
Engineered below-the-hook equipment is built to order. Your enquiry is reviewed by the maker's design engineers, who issue a general arrangement drawing for your approval before anything is made. Each item is designed to EN 13155, load tested before dispatch and supplied with a declaration of conformity, a test certificate and user instructions. Design calculations, material certificates, NDT records and third-party witnessed testing can be added to the order, and offshore designs to DNV standards are available on request. We confirm the lead time with the quotation.
In service
In service, the equipment gets a pre-use check before every lift and a thorough examination by an approved third party at the interval the site's authority sets: in Abu Dhabi, Code of Practice 34 sets six months for lifting accessories and twelve for lifting equipment, and in Dubai the examination is made by an EIAC-accredited inspection body. Its rated load, identification and test date are marked on it, and the user instructions state how it may and may not be rigged. Our guide to lifting equipment inspection in the UAE sets out the rules emirate by emirate.
Identification
| Parameter | Value |
|---|---|
| Product type | Scissor grab (made to order) |
| Pattern / standard | EN 13155; ASME B30.20 / BTH-1 or DNV offshore design on request |
Performance
| Parameter | Value |
|---|---|
| Working load limit | To order |
Dimensions
| Parameter | Value |
|---|---|
| Size range | Built to the load |
Construction
| Parameter | Value |
|---|---|
| Material | Structural steel, grade to the design |
| Finish | Paint system to your specification; galvanized for outdoor use on request |
Compliance
| Parameter | Value |
|---|---|
| Certification | Load tested before dispatch; declaration of conformity |
Supply
| Parameter | Value |
|---|---|
| Supply | Made to order from an approved general arrangement drawing |
| Documentation | GA drawing for approval, declaration of conformity, test certificate, user instructions |
Shipping & lead time
What are Scissor Grabs used for?▾
What sizes can Scissor Grabs be supplied in?▾
What do I need to send for Scissor Grabs to be sized and quoted?▾
What working load limit do Scissor Grabs have?▾
Can Scissor Grabs be designed for offshore use?▾
What are Scissor Grabs made from, and what finish does it have?▾
Are Scissor Grabs certified, and to which standard?▾
What do Scissor Grabs connect to or work with?▾
How should Scissor Grabs be inspected and looked after?▾
How do Scissor Grabs differ from C-Hooks?▾
Can Scissor Grabs be supplied to customers outside the UAE?▾
What is the lead time and how do I get a quotation for Scissor Grabs?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations




