Skip to content
IH-LR-BH-SSB

Semi-Spreader Lifting Beams — EN 13155

Lifting BeamsContact for availability
Semi-spreader lifting beam with two top lugs and three bottom lifting points
VIEW 01·Semi-spreader lifting beam with two top lugs and three bottom lifting points
1 / 2

Lifting beams with two top lugs and several bottom points, fixed or on sliding clamps, that share a long load between more lifting points than a spreader beam allows, engineered to EN 13155.

Key features

  • Product type: Semi-spreader lifting beam (made to order)
  • Pattern / standard: EN 13155; ASME B30.20 / BTH-1 or DNV offshore design on request
  • Size range: Built to the load
  • Working load limit: To order
Material
Structural steel, grade to the design
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A semi-spreader sits between a spreader beam and a lifting beam. Two top lugs share the load to the hook, which reduces the bending in the beam, while several bottom points hold a long or flexible load along its length.

Sliding clamps let the bottom points be moved along the beam to suit loads of different lengths without changing the beam.

Typical builds

  • Semi-spreader multi-point lifting beams
  • Beams with sliding bottom clamps
  • Beams for pipe, panels and long fabrications

What we need to quote

Send us the load weight and where its centre of gravity sits, the load's length and width, the positions of its lifting points, the crane hook height and any headroom limit, and the environment the equipment will work in (indoor, outdoor, offshore, hazardous area). A drawing, a 3D model or a photo of the load is the quickest way to start.

How it is made and certified

Engineered below-the-hook equipment is built to order. Your enquiry is reviewed by the maker's design engineers, who issue a general arrangement drawing for your approval before anything is made. Each item is designed to EN 13155, load tested before dispatch and supplied with a declaration of conformity, a test certificate and user instructions. Design calculations, material certificates, NDT records and third-party witnessed testing can be added to the order, and offshore designs to DNV standards are available on request. We confirm the lead time with the quotation.

In service

In service, the equipment gets a pre-use check before every lift and a thorough examination by an approved third party at the interval the site's authority sets: in Abu Dhabi, Code of Practice 34 sets six months for lifting accessories and twelve for lifting equipment, and in Dubai the examination is made by an EIAC-accredited inspection body. Its rated load, identification and test date are marked on it, and the user instructions state how it may and may not be rigged. Our guide to lifting equipment inspection in the UAE sets out the rules emirate by emirate.

Identification

ParameterValue
Product typeSemi-spreader lifting beam (made to order)
Pattern / standardEN 13155; ASME B30.20 / BTH-1 or DNV offshore design on request

Performance

ParameterValue
Working load limitTo order

Dimensions

ParameterValue
Size rangeBuilt to the load

Construction

ParameterValue
MaterialStructural steel, grade to the design
FinishPaint system to your specification; galvanized for outdoor use on request

Compliance

ParameterValue
CertificationLoad tested before dispatch; declaration of conformity

Supply

ParameterValue
SupplyMade to order from an approved general arrangement drawing
DocumentationGA drawing for approval, declaration of conformity, test certificate, user instructions

Shipping & lead time

Lead TimeContact us for current lead time.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at