Skip to content
SUN HYDRAULICSIH-SUN-CB-LX

Sun Hydraulics Fixed-Setting 2.3:1 Pilot Ratio Counterbalance Valve — CBBLX, CBCLX, Series 1

Counterbalance & Load-Holding ValvesEx-stock · delivery in 3 days
Sun Hydraulics CBCLX fixed-setting counterbalance valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CBCLX fixed-setting counterbalance valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics fixed-setting counterbalance valve, 2.3:1 pilot ratio: CBBLX, CBCLX, series 1, 10 gpm to 15 gpm (40 L/min to 60 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Fixed-Setting Counterbalance Valve
  • Capacity: 10 gpm to 15 gpm (40 L/min to 60 L/min)
  • Cavity: T-11A
Valve function
Fixed-Setting Counterbalance Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

This is the 3-port counterbalance valve with its setting fixed at the factory instead of a field adjustment. The integral check gives free flow into the actuator (port 2 to port 1); the pilot-assisted relief stage holds the load (port 1 to port 2) until pilot pressure at port 3 opens it in proportion to the pilot ratio. With no adjusting screw it cannot be turned down in the field, and it sits lower than the adjustable version.

Sizes and cavities

Sun Hydraulics builds this valve in 2 sizes. The series sets the cavity it screws into and its flow capacity:

  • CBBLX — series 1, T-11A cavity, 10 gpm (40 L/min), semi-restrictive
  • CBCLX — series 1, T-11A cavity, 15 gpm (60 L/min), standard capacity

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Pilot ratio: 2.3:1
  • Maximum leakage: 5 drops/min. (0,3 cc/min)
  • Check cracking pressure: 25 psi (1,7 bar)

Configuration options

The letters after the base model code choose these options (shown for CBCLX; a size may add or drop a choice):

  • Setting range: M — 4700 - 5600 psi (325 - 390 bar), V — 3200 - 3800 psi (220 - 260 bar), X — 3500 - 4200 psi (245 - 290 bar), Z — 4125 - 4900 psi (285 - 340 bar)
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Material / coating: /LH — Mild Steel, Zinc-Nickel

Selection notes

  • Ordered by pressure range: the valve is factory set to a nominal value within it.
  • The range figures are approximate mean values, not inspection limits.
  • Lower profile than the adjustable valve, with no screw or locknut to tamper with.

Where it is used

OEM machines where the setting must not be changed in service: aerial platforms, cranes and handling equipment built to a fixed load chart.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CBCLXMN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Performance

ParameterValue
Capacity10 gpm to 15 gpm (40 L/min to 60 L/min)
Pilot ratio2.3:1
Setting rangeM — 4700 - 5600 psi (325 - 390 bar), V — 3200 - 3800 psi (220 - 260 bar), X — 3500 - 4200 psi (245 - 290 bar), Z — 4125 - 4900 psi (285 - 340 bar)
Max leakage5 drops/min. (0,3 cc/min)

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006
Weight.35 lb (0,15 kg)

Identification

ParameterValue
Valve functionFixed-Setting Counterbalance Valve
Series (frame sizes)1
CavityT-11A

Configuration

ParameterValue
Seal materialN — Buna-N, V — Viton, E — EPDM
Material / coating/LH — Mild Steel, Zinc-Nickel

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at