Skip to content
SUN HYDRAULICSIH-SUN-CACH

Sun Hydraulics 10:1 Pilot Ratio Vented Counterbalance Valve, Atmospherically Referenced — CACH

Counterbalance & Load-Holding ValvesEx-stock · delivery in 3 days
Sun Hydraulics CACH atmospherically vented counterbalance valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CACH atmospherically vented counterbalance valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics atmospherically vented counterbalance valve, 10:1 pilot ratio: CACH, series 1, 15 gpm (60 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Atmospherically Vented Counterbalance Valve
  • Capacity: 15 gpm (60 L/min)
  • Max operating pressure: Max setting 6000 psi (420 bar)
  • Cavity: T-11A
Valve function
Atmospherically Vented Counterbalance Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A 3-port counterbalance valve with its spring chamber open to atmosphere, so it fits the standard 3-port cavity yet ignores back-pressure in the return line. Free flow into the actuator passes the check (port 2 to port 1); the pilot-assisted relief stage holds the load (port 1 to port 2) until pilot pressure at port 3 lowers the setting by the pilot ratio.

Sizes and cavities

Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:

  • CACH — series 1, T-11A cavity, 15 gpm (60 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Pilot ratio: 10:1
  • Maximum setting: 6000 psi (420 bar)
  • Maximum recommended load pressure at maximum setting: 4615 psi (320 bar)
  • Maximum leakage: 5 drops/min. (0,3 cc/min)
  • Reseat: >85% of setting
  • Check cracking pressure: 40 psi (2,8 bar)

Configuration options

The letters after the base model code choose these options (shown for CACH; a size may add or drop a choice):

  • Control: L — Standard Screw Adjustment, C — Tamper Resistant - Factory Set
  • Setting range: G — 2000 - 6000 psi (140 - 420 bar), 4000 psi (280 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /AP, the control must be C or L; If the modifier is /LH, the control must be L.

Selection notes

  • Back-pressure at port 2 does not change the setting.
  • Roughly one drop of oil seeps past the pilot into the open spring chamber per 4,000 cycles, so mount it where that small weep is acceptable.
  • Set it at least 1.3 times the highest load-induced pressure.

Where it is used

Load-holding circuits with back-pressure at the valve where only a 3-port cavity is available — regeneration and proportional-valve circuits on mobile machines.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990211007, Viton: 990211006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CACHLGN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990211007, Viton: 990211006
Weight.40 lb (0,20 kg)

Identification

ParameterValue
Valve functionAtmospherically Vented Counterbalance Valve
Series (frame sizes)1
CavityT-11A

Configuration

ParameterValue
Control / adjustmentL — Standard Screw Adjustment, C — Tamper Resistant - Factory Set
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Performance

ParameterValue
Capacity15 gpm (60 L/min)
Max operating pressureMax setting 6000 psi (420 bar)
Pilot ratio10:1
Setting rangeG — 2000 - 6000 psi (140 - 420 bar), 4000 psi (280 bar) Standard Setting
Max leakage5 drops/min. (0,3 cc/min)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at