Skip to content
SUN HYDRAULICSIH-SUN-MA-P

Sun Hydraulics Atmospherically Referenced LoadMatch™ Counterbalance Valve — MADP, MAEP, Series 1 to 2

Counterbalance & Load-Holding ValvesEx-stock · delivery in 3 days
Sun Hydraulics MADP LoadMatch™ counterbalance valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics MADP LoadMatch™ counterbalance valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics LoadMatch™ counterbalance valve: MADP, MAEP, series 1 to 2, 15 gpm to 30 gpm (60 L/min to 120 L/min), T-11A, T-2A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: LoadMatch™ Counterbalance Valve
  • Capacity: 15 gpm to 30 gpm (60 L/min to 120 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A, T-2A
Valve function
LoadMatch™ Counterbalance Valve
Series (frame sizes)
1 to 2
Cavity
T-11A, T-2A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A self-setting counterbalance valve. Instead of a fixed setting it moves its working setting to roughly 1.3× the pressure the load induces, capped by a fixed thermal relief setting, and combines reverse free flow, load control and thermal relief in one cartridge. Because the working setting is only as high as the load needs, it usually opens with less pilot pressure than a conventional valve with the same relief setting.

Sizes and cavities

Sun Hydraulics builds this valve in 2 sizes. The series sets the cavity it screws into and its flow capacity:

  • MADP — series 1, T-11A cavity, 15 gpm (60 L/min)
  • MAEP — series 2, T-2A cavity, 30 gpm (120 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 5 drops/min. (0,3 cc/min)
  • Reseat: ≥77% of setting
  • Check cracking pressure: 25 psi (1,7 bar)

Configuration options

The letters after the base model code choose these options (shown for MADP; a size may add or drop a choice):

  • Control: D — LoadMatch™
  • Setting range: H — 4000 psi (280 bar), G — 6000 psi (420 bar), J — 5000 psi (350 bar)
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • Ordered by the factory-set thermal relief pressure.
  • Reseats at or above 77% of the setting.

Where it is used

Mobile machines whose loads vary widely, where lower pilot pressure saves energy and fuel.

Installation and seal kits

Valve hex 1.00 in. (25,4 mm), 1 3/8 in. (34,9 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 1: Buna: 990011007, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example MADPDHN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size1.00 in. (25,4 mm), 1 3/8 in. (34,9 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm)
Seal kitsseries 1: Buna: 990011007, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006

Identification

ParameterValue
Valve functionLoadMatch™ Counterbalance Valve
Series (frame sizes)1 to 2
CavityT-11A, T-2A

Performance

ParameterValue
Capacity15 gpm to 30 gpm (60 L/min to 120 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeH — 4000 psi (280 bar), G — 6000 psi (420 bar), J — 5000 psi (350 bar)
Max leakage5 drops/min. (0,3 cc/min)

Configuration

ParameterValue
Control / adjustmentD — LoadMatch™
Seal materialN — Buna-N, V — Viton

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at