Skip to content
SUN HYDRAULICSIH-SUN-CE-AC

Sun Hydraulics 3:1 Pilot Ratio LoadAdaptive™ Counterbalance Valve — CEBA, CEBC, CECA, Series 1

Counterbalance & Load-Holding ValvesEx-stock · delivery in 3 days
Sun Hydraulics CECA LoadAdaptive™ counterbalance valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics CECA LoadAdaptive™ counterbalance valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics LoadAdaptive™ counterbalance valve, 3:1 pilot ratio: CEBA, CEBC, CECA, series 1, 5 gpm to 15 gpm (20 L/min to 60 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: LoadAdaptive™ Counterbalance Valve
  • Capacity: 5 gpm to 15 gpm (20 L/min to 60 L/min)
  • Max operating pressure: Max setting 4000 psi (280 bar)
  • Cavity: T-11A
Valve function
LoadAdaptive™ Counterbalance Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A counterbalance valve whose pilot ratio changes with the duty. While the load is held and not yet moving, or when the load is being driven rather than overrunning, the effective pilot ratio is higher, so less pilot pressure is needed; once the load overruns, the valve controls it at its base ratio. Free flow into the actuator passes the check (port 2 to port 1).

Sizes and cavities

Sun Hydraulics builds this valve in 3 sizes. The series sets the cavity it screws into and its flow capacity:

  • CEBA — series 1, T-11A cavity, 5 gpm (20 L/min), restrictive
  • CEBC — series 1, T-11A cavity, 10 gpm (40 L/min), semi-restrictive
  • CECA — series 1, T-11A cavity, 15 gpm (60 L/min), standard capacity

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Pilot ratio: 3:1
  • Maximum setting: 4000 psi (280 bar)
  • Maximum recommended load pressure at maximum setting: 3075 psi (215 bar)
  • Maximum leakage: 5 drops/min. (0,3 cc/min)
  • Reseat: >85% of setting

Configuration options

The letters after the base model code choose these options (shown for CECA; a size may add or drop a choice):

  • Control: C — Tamper Resistant - Factory Set, L — Standard Screw Adjustment, R — Lockwired Screw Adjustment
  • Setting range: A — 1500 - 4000 psi w/ 4 psi check (105 - 280 bar w/ 0,3 bar Check), 3000 psi (210 bar) Standard Setting, H — 1500 - 4000 psi w/ 25 psi check (105 - 280 bar w/ 1,7 bar Check), 3000 psi (210 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated

Option rules: If the modifier is /AP, the control must be C or L.

Selection notes

  • Base pilot ratio as listed; the adaptive ratio is shown on Sun's performance curves.
  • Set it at least 1.3 times the highest load-induced pressure.

Where it is used

Cranes, aerial platforms and handling machines that alternate between driving and lowering loads, where both stability and energy use matter.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CECALHN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionLoadAdaptive™ Counterbalance Valve
Series (frame sizes)1
CavityT-11A

Configuration

ParameterValue
Control / adjustmentC — Tamper Resistant - Factory Set, L — Standard Screw Adjustment, R — Lockwired Screw Adjustment
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006
Weight.55 lb (0,25 kg)

Performance

ParameterValue
Capacity5 gpm to 15 gpm (20 L/min to 60 L/min)
Max operating pressureMax setting 4000 psi (280 bar)
Pilot ratio3:1
Setting rangeA — 1500 - 4000 psi w/ 4 psi check (105 - 280 bar w/ 0,3 bar Check), 3000 psi (210 bar) Standard Setting, H — 1500 - 4000 psi w/ 25 psi check (105 - 280 bar w/ 1,7 bar Check), 3000 psi (210 bar) Standard Setting
Max leakage5 drops/min. (0,3 cc/min)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at