- 01What do G-209, G-2130 and G-213 mean?
- They are widely used US pattern numbers: G-209 is a screw-pin anchor shackle, G-2130 a bolt-type anchor shackle, and G-213 a round-pin anchor shackle. Shackles sold to a pattern share its dimensions, so they interchange in an existing rigging plan.
- 02What is the difference between WLL, SWL and breaking load?
- WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
- 03Do the parts come with test certificates?
- Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
- 04When does a shackle have to be taken out of service?
- When ASME B30.26's removal criteria or the maker's instructions say so. The standard's list includes missing or illegible markings, heat damage, excessive pitting or corrosion, a bent, twisted, distorted or elongated body or pin, cracks, excessive nicks or gouges, damaged threads, incomplete pin engagement, unauthorised welding, and a reduction of 10% of the original or catalogue dimension at any point around the body or pin. A shackle removed for any of these returns to service only if a qualified person approves it.
- 05Can I replace a lost shackle pin with an ordinary bolt?
- No. Replace it only with the pin the shackle maker supplies for that size and grade. A shackle's rating depends on a pin of the right diameter, material and heat treatment, and a hardware bolt has none of these guaranteed; ASME B30.26 requires replacement parts to meet the original manufacturer's specification. Pins from another maker or pattern may look the same but differ in thread, length or grade, so they should not be swapped between shackles either.
- 06Carbon, Grade 8 alloy or stainless — which shackle should I order?
- Order the material your rigging plan rates for. A Grade 8 alloy shackle carries a higher WLL than a carbon-steel shackle of the same nominal size, so it is the usual choice where weight and size matter. Galvanised carbon-steel shackles are the general-purpose standard. Stainless shackles are chosen for corrosion, not strength, and their ratings vary by maker and casting. The size table on each product page lists the WLL for every size; compare those rows rather than the nominal size.