Stainless Steel Screw Pin Anchor Shackle — US Type
Stainless Steel Screw Pin Anchor Shackle, in 23 sizes, 3/16″ to 1-1/4″, WLL 300 to 13,600 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Screw Pin Anchor Shackle
- Size range: 3/16″ to 1-1/4″
- Working load limit: 300 to 13,600 lbs
- Size range
- 3/16″ to 1-1/4″
- Working load limit
- 300 to 13,600 lbs
- Material
- Stainless steel 304 or 316
Product description
A shackle joins a sling, hook or chain to a lifting point and opens with a removable pin. Stainless steel 304 or 316.
Sizes and ratings
23 sizes, 3/16″ to 1-1/4″. Working load limit 300 to 13,600 lbs. Minimum breaking load 2,600 to 56,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on working load limit for the pull you will actually apply. A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull. Side-loading reduces the rating, and a screw pin must be fully seated before loading.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Screw Pin Anchor Shackle |
| Sizes | 23 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/16″ to 1-1/4″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 300 to 13,600 lbs |
| Minimum breaking load | 2,600 to 56,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
23 sizes| Indus part no. | Size | Type | WLL (lbs) | Min breaking load (lbs) | Pin dia. (mm) | Inside length (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| IH-LR-SH-SSA-019 | 3/16″ | Standard | 300 | — | 6.3 | 22.2 | 0.021 |
| IH-LR-SH-SSA-025 | 1/4″ | Standard | 450 | — | 7.9 | 28.6 | 0.036 |
| IH-LR-SH-SSA-031 | 5/16″ | Standard | 650 | — | 9.5 | 31 | 0.077 |
| IH-LR-SH-SSA-038 | 3/8″ | Standard | 1,000 | — | 11.1 | 36.5 | 0.138 |
| IH-LR-SH-SSA-044 | 7/16″ | Standard | 1,450 | — | 12.7 | 42.9 | 0.175 |
| IH-LR-SH-SSA-050 | 1/2″ | Standard | 1,990 | — | 15.9 | 47.6 | 0.261 |
| IH-LR-SH-SSA-062 | 5/8″ | Standard | 3,050 | — | 19 | 60.3 | 0.552 |
| IH-LR-SH-SSA-075 | 3/4″ | Standard | 4,470 | — | 22.2 | 71.4 | 1.02 |
| IH-LR-SH-SSA-088 | 7/8″ | Standard | 6,000 | — | 25.4 | 84.1 | 1.6 |
| IH-LR-SH-SSA-100 | 1″ | Standard | 7,950 | — | 28.6 | 95.2 | 2.4 |
| IH-LR-SH-SSA-112 | 1-1/8″ | Standard | 10,500 | — | 31.8 | 107.9 | 3.14 |
| IH-LR-SH-SSA-125 | 1-1/4″ | Standard | 13,600 | — | 34.9 | 119.1 | 4.38 |
| IH-LR-SH-SSA-019-PC | 3/16″ | Precision cast | — | 2,600 | 6.35 | — | — |
| IH-LR-SH-SSA-025-PC | 1/4″ | Precision cast | — | 3,520 | 7.938 | — | — |
| IH-LR-SH-SSA-031-PC | 5/16″ | Precision cast | — | 5,200 | 9.525 | — | — |
| IH-LR-SH-SSA-038-PC | 3/8″ | Precision cast | — | 6,000 | 11.11 | — | — |
| IH-LR-SH-SSA-044-PC | 7/16″ | Precision cast | — | 8,000 | 12.7 | — | — |
| IH-LR-SH-SSA-050-PC | 1/2″ | Precision cast | — | 12,000 | 15.88 | — | — |
| IH-LR-SH-SSA-58-PC | 5/8 | Precision cast | — | 16,000 | 19.05 | — | — |
| IH-LR-SH-SSA-075-PC | 3/4″ | Precision cast | — | 24,000 | 22.22 | — | — |
| IH-LR-SH-SSA-088-PC | 7/8″ | Precision cast | — | 32,000 | 25.4 | — | — |
| IH-LR-SH-SSA-100-PC | 1″ | Precision cast | — | 40,000 | 28.57 | — | — |
| IH-LR-SH-SSA-125-PC | 1-1/4″ | Precision cast | — | 56,000 | 33.34 | — | — |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Pin dia. — Diameter of the pin or bolt. Inside length — Inside length of the link or bow. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel screw pin anchor shackle come in?▾
What is the working load limit?▾
What do G-209, G-2130 and G-213 mean?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Lifting & rigging
Stainless vs galvanized rigging in Gulf coastal air: what lasts, and what carries less
On the Gulf coast, zinc on galvanized rigging can be lost at up to 8 µm a year, and faster offshore. Stainless steel does not rust away, but it pits in salt air, can crack in hot chloride conditions, and is usually rated well below carbon or alloy steel of the same size. Here is how to choose.
5 min read
Lifting & rigging
Types of shackles: anchor vs chain, and screw pin vs bolt type vs round pin
A shackle is chosen on two decisions: the body shape, which sets the directions it can be loaded from, and the pin, which sets how securely it stays closed. Here is how anchor and chain shackles differ, when each pin type is right, and how material changes the rating at the same size.
8 min read
Engineers viewing this also looked at
Grade S Shackle — AS 2741, Safety Pin
Grade S Shackle — AS 2741, Screw Pin
Stainless Steel Bolt-Type Anchor Shackle — G-2130 Pattern
Stainless Steel Bolt-Type Chain Shackle — G-2150 Pattern
Stainless Steel Oversized Anchor Shackle — Bolt Pin
Stainless Steel Screw Pin Chain Shackle — US Type
Stainless Steel Captive Pin Shackle
