Stainless Steel Oversized Anchor Shackle — Bolt Pin
Stainless Steel Oversized Anchor Shackle (US federal specification), in 12 sizes, 22.35 mm to 119.1 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Oversized Anchor Shackle
- Pattern / standard: US federal specification
- Size range: 22.35 mm to 119.1 mm
- Size range
- 22.35 mm to 119.1 mm
- Material
- Stainless steel AISI 304/316 shackle
- Finish
- Polished / electrophoretic coating
Product description
A shackle joins a sling, hook or chain to a lifting point and opens with a removable pin. Built to the US federal specification. Stainless steel AISI 304/316 shackle, polished / electrophoretic coating.
Sizes and ratings
12 sizes, 22.35 mm to 119.1 mm. Minimum breaking load 13.7 to 494.4 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Free forging.
Choosing a size
Choose on working load limit for the pull you will actually apply. A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull. Side-loading reduces the rating, and a screw pin must be fully seated before loading.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Oversized Anchor Shackle |
| Pattern / standard | US federal specification |
| Sizes | 12 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 22.35 mm to 119.1 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 13.7 to 494.4 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel AISI 304/316 shackle |
| Finish | Polished / electrophoretic coating |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
12 sizes| Indus part no. | Size | Min breaking load (kN) | A (mm) | B (mm) | C (mm) | D (mm) |
|---|---|---|---|---|---|---|
| IH-LR-SH-SSBPASO-22P35MM | 22.35 mm | 13.7 | 4.762 | 6.35 | 9.652 | 22.35 |
| IH-LR-SH-SSBPASO-28P7MM | 28.7 mm | 24.4 | 6.35 | 7.938 | 11.94 | 28.7 |
| IH-LR-SH-SSBPASO-31P75MM | 31.75 mm | 38.2 | 7.938 | 9.525 | 13.46 | 31.75 |
| IH-LR-SH-SSBPASO-36P58MM | 36.58 mm | 54.9 | 9.525 | 11.11 | 16.76 | 36.58 |
| IH-LR-SH-SSBPASO-42P93MM | 42.93 mm | 54.9 | 11.11 | 12.7 | 19.05 | 42.93 |
| IH-LR-SH-SSBPASO-47P75MM | 47.75 mm | 97.7 | 12.7 | 15.88 | 20.57 | 47.75 |
| IH-LR-SH-SSBPASO-60P45MM | 60.45 mm | 152.6 | 15.88 | 19.05 | 26.92 | 60.45 |
| IH-LR-SH-SSBPASO-71P37MM | 71.37 mm | 184.7 | 19.05 | 22.22 | 31.75 | 71.37 |
| IH-LR-SH-SSBPASO-84P07MM | 84.07 mm | 219.7 | 22.22 | 25.4 | 36.58 | 84.07 |
| IH-LR-SH-SSBPASO-95P25MM | 95.25 mm | 278.1 | 25.4 | 28.57 | 42.93 | 95.25 |
| IH-LR-SH-SSBPASO-107P9MM | 107.9 mm | 390.7 | 28.57 | 31.75 | 45.97 | 107.9 |
| IH-LR-SH-SSBPASO-119P1MM | 119.1 mm | 494.4 | 31.75 | 34.92 | 51.56 | 119.1 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the stainless steel oversized anchor shackle come in?▾
What do G-209, G-2130 and G-213 mean?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Screw Pin Chain Shackle — US Type
Stainless Steel Captive Pin Shackle
Stainless Steel D Shackle — Countersunk Flush Pin
Stainless Steel D Shackle — JIS Type, Screw Pin
Stainless Steel Fixed Snap Shackle
Stainless Steel Hex Socket Pin Shackle
Stainless Steel Key Pin Shackle
