Stainless Steel Screw Pin Shackle — Long and Wide Dee
Stainless Steel Screw Pin Shackle (European type), in 12 sizes, 5 mm to 128 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Screw Pin Shackle
- Pattern / standard: European type
- Size range: 5 mm to 128 mm
- Size range
- 5 mm to 128 mm
- Material
- Stainless steel 304 or 316 d shackle
- Finish
- Polished / electrophoretic coating
Product description
A shackle joins a sling, hook or chain to a lifting point and opens with a removable pin. Built to the European pattern. Stainless steel 304 or 316 d shackle, polished / electrophoretic coating.
Sizes and ratings
12 sizes, 5 mm to 128 mm. Minimum breaking load 58 to 977 kN. Available as: long dee, wide dee. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Forged / stamping.
Choosing a size
Choose on working load limit for the pull you will actually apply. A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull. Side-loading reduces the rating, and a screw pin must be fully seated before loading.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Screw Pin Shackle |
| Pattern / standard | European type |
| Sizes | 12 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5 mm to 128 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 58 to 977 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 d shackle |
| Finish | Polished / electrophoretic coating |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
12 sizes| Indus part no. | Size | Type | Min breaking load (kN) | A (mm) | B (mm) | C (mm) | D (mm) | D1 (mm) | L (mm) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-SH-SSSPSLWD-32MM-LD | 32 mm | Long dee | 58 | 4 | 4 | 8 | 32 | — | — |
| IH-LR-SH-SSSPSLWD-40MM-LD | 40 mm | Long dee | 91 | 5 | 5 | 10 | 40 | — | — |
| IH-LR-SH-SSSPSLWD-48MM-LD | 48 mm | Long dee | 132 | 6 | 6 | 12 | 48 | — | — |
| IH-LR-SH-SSSPSLWD-64MM-LD | 64 mm | Long dee | 237 | 8 | 8 | 16 | 64 | — | — |
| IH-LR-SH-SSSPSLWD-80MM-LD | 80 mm | Long dee | 373 | 10 | 10 | 20 | 80 | — | — |
| IH-LR-SH-SSSPSLWD-96MM-LD | 96 mm | Long dee | 549 | 12 | 12 | 24 | 96 | — | — |
| IH-LR-SH-SSSPSLWD-128MM-LD | 128 mm | Long dee | 977 | 16 | 16 | 32 | 128 | — | — |
| IH-LR-SH-SSSPSLWD-5MM-WD | 5 mm | Wide dee | 91 | 25 | — | — | 5 | 5 | 245 |
| IH-LR-SH-SSSPSLWD-6MM-WD | 6 mm | Wide dee | 132 | 24 | — | — | 6 | 6 | 360 |
| IH-LR-SH-SSSPSLWD-8MM-WD | 8 mm | Wide dee | 237 | 28 | — | — | 8 | 8 | 360 |
| IH-LR-SH-SSSPSLWD-10MM-WD | 10 mm | Wide dee | 373 | 40 | — | — | 10 | 10 | 600 |
| IH-LR-SH-SSSPSLWD-12MM-WD | 12 mm | Wide dee | 549 | 50 | — | — | 12 | 12 | 720 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the stainless steel screw pin shackle come in?▾
What do G-209, G-2130 and G-213 mean?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Shackle — Square Head Pin
Stainless Steel Swivel Snap Shackle
Stainless Steel Twist Shackle — Screw Pin
Wide Body Sling Shackle, Safety Pin
Grade 8 Alloy Bolt-Type Anchor Shackle
Grade 8 Alloy Bolt-Type Chain Shackle
Grade 8 Alloy Screw Pin Anchor Shackle
