Stainless Steel Key Pin Shackle
Stainless Steel Key Pin Shackle, in 6 sizes, 5 mm to 8 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Key Pin Shackle
- Size range: 5 mm to 8 mm
- Size range
- 5 mm to 8 mm
- Material
- Stainless steel 304 or 316 long d shackle
- Finish
- Polished / electrophoretic coating
Product description
A shackle joins a sling, hook or chain to a lifting point and opens with a removable pin. Stainless steel 304 or 316 long d shackle, polished / electrophoretic coating.
Sizes and ratings
6 sizes, 5 mm to 8 mm. Minimum breaking load 64 to 157 kN. Available as: dee with bar, long dee. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Forged / stamping.
Choosing a size
Choose on working load limit for the pull you will actually apply. A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull. Side-loading reduces the rating, and a screw pin must be fully seated before loading.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Key Pin Shackle |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5 mm to 8 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 64 to 157 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 long d shackle |
| Finish | Polished / electrophoretic coating |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes| Indus part no. | Size | Type | Min breaking load (kN) | A (mm) | D (mm) | D1 (mm) | L (mm) |
|---|---|---|---|---|---|---|---|
| IH-LR-SH-SSKPS-5MM-DB | 5 mm | Dee with bar | 64 | 125 | 5 | 60 | 40 |
| IH-LR-SH-SSKPS-6MM-DB | 6 mm | Dee with bar | 101 | 150 | 6 | 60 | 48 |
| IH-LR-SH-SSKPS-8MM-DB | 8 mm | Dee with bar | 157 | 200 | 8 | 65 | 64 |
| IH-LR-SH-SSKPS-5MM-LD | 5 mm | Long dee | 64 | 125 | 5 | — | 40 |
| IH-LR-SH-SSKPS-6MM-LD | 6 mm | Long dee | 101 | 150 | 6 | — | 48 |
| IH-LR-SH-SSKPS-8MM-LD | 8 mm | Long dee | 157 | 200 | 8 | — | 64 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the stainless steel key pin shackle come in?▾
What do G-209, G-2130 and G-213 mean?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Pelican Hook
Stainless Steel Quick Release Snap Shackle with Round Swivel Ring
Stainless Steel Shackle — European Type, Screw Pin
Stainless Steel Trigger Snap Shackle — Universal Eye
Stainless Steel Screw Pin Shackle — Long and Wide Dee
Stainless Steel Shackle — Square Head Pin
Stainless Steel Swivel Snap Shackle
