Skip to content

Finned Tubes

17 SKUs

Showing 1–17 of 17 SKUs

Integral low-fin tube cut at an angle, fins rolled out of the tube wall

Integral Low-Fin Tubes

Integral Low-Fin TubesCS SA-179, SA-214, SA-334 Gr 1/3/6; Ferritic stainless 405/410/430/439; Austenitic 304/316/317/321; Duplex 2205/2101; 6Mo (N08367); Ni alloys 600/625/800/825/C-276; Alloy 400 (N04400); Ti Gr 1/2/16/26
Inquire
Notched fin tube close up, a tightly wound fin with notched, crinkled edges along the tube

Notched and Root-Serrated Fin Tubes

Notched and Root-Serrated Fin TubesHelically wound fin, notched or serrated at the root
Inquire
Overlapped wound fin tubes close up, fin feet overlapping on the tube above the bare ends

LL Overlapped Wound Fin Tubes

Aluminium; CopperLL Overlapped Wound Fin Tubes
Inquire
L-foot wound fin tubes close up, thin fins wrapped tightly round each tube

L-Foot Tension-Wound Fin Tubes

Unlimited: CS, stainless, copper alloysTension wound with an L-shaped foot; contact pressure only, which loosens with time and temperature cycling
Inquire
Wound aluminium fin tubes stacked, showing the bare steel tube ends

KL Knurled Wound Fin Tubes

KL Knurled Wound Fin TubesBase tube knurled first, L-foot pressed into the knurl while tension winding
Inquire
Crimped fin tubes stacked, with plain tube ends at one end

Crimped Fin Tubes

Edge-wound helical fin, crimped at the root, tension-wound on the base tubeCarbon steel, stainless steel, copper or copper alloy, to the standard on the order
Inquire
Studded tubes close up, rows of welded steel studs on the tube surface

Studded Tubes

Each stud arc- or resistance-welded to the tubeStudded Tubes
Inquire
Elliptical tube with rectangular plate fins, cut end showing the oval bore

Oval and Elliptical Fin Tubes

Oval and Elliptical Fin Tubes
Inquire
Longitudinal fin tubes in a crate, straight fins running the length of each tube

Longitudinal Fin Tubes

Electric resistance welded (fin strip formed into U-channel)Any weldable tube
Inquire
Large-diameter finned pipes on a shop floor, spiral welded fins with plain pipe ends

Large-Diameter Finned Pipe

Large-Diameter Finned PipeA106 B; A335 P5/P9/P11/P22; A312 TP304H/321H/347H
Inquire
Serrated spiral fin tubes stacked end-on, segmented steel fins round each bare tube end

High-Frequency Welded Spiral Fin Tubes — Solid and Serrated

CS A106 B, A192, A210; Cr-Mo A213 T5/T9/T11/T22, A335 P5/P9/P11/P22; Stainless A312/A213 TP304H/321/347High-Frequency Welded Spiral Fin Tubes
Inquire
H-fin tube end view, paired square steel fins welded either side of the tube

H-Fin and Rectangular Fin Tubes

H-Fin and Rectangular Fin TubesTwo plates with central arcs welded to one tube (H) or one plate across two tubes (double-H); in-line tubes
Inquire
Laser-welded fin tube on a bench, tight spiral fins stopping short of the plain tube end

Laser-Welded Fin Tubes

Stainless; Carbon steelLaser-Welded Fin Tubes
Inquire
Finned tube serpentine bundles stacked on timber, finned straight legs with plain return bends

Finned Tubes for Air-Cooled Exchangers

CS; stainless; admiralty; exotic alloysAluminium (almost always); steel for very high temperature
Inquire
Extruded aluminium fin tubes with the inner liner tube showing at each end

Extruded Aluminium Fin Tubes

Extruded Aluminium Fin TubesCarbon steel SA179, SA334 Gr 6; Stainless, duplex, titanium, copper alloys (liner of almost any material)
Inquire
Internally rifled steel tube cut open, multi-lead helical ribs along the bore

Enhanced-Surface Tubes

Enhanced-Surface TubesWorked or coated tube surface: sintered porous coating, helically twisted oval, rifled or corrugated
Inquire
Embedded fin tube end, fins seated in a helical groove with the plain tube end beyond

Embedded G-Fin Tubes

Carbon steel A179, A192, SA210 A1/C, A106 B; Stainless TP304/304L, TP316/316L; Duplex S31803; Copper C12200, Cu-Ni 90/10, 70/30Aluminium 1060/1100; Copper; Carbon steel
Inquire

Questions we get asked

About this range

01Which fin type is best for a coastal or offshore air cooler?
Extruded aluminium fins, because the fin sleeve covers the base tube completely and leaves no crevice at the fin root. LL overlapped fins also cover the tube fully.
02What do I need to specify for a finned tube?
The base tube standard, grade, OD and wall; the fin type and material; fin height, thickness and fins per inch; the finned length and the bare ends at each end; and the quantity.