Grade 70 Trailer Safety Chain — NZS 5467, 8–10 mm

Grade 70 Trailer Safety Chain (NZS 5467), in 2 sizes, 8 mm to 10 mm. Not rated for lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 70 Trailer Safety Chain
- Pattern / standard: NZS 5467
- Size range: 8 mm to 10 mm
- Size range
- 8 mm to 10 mm
- Material
- Alloy steel
- Finish
- Gold passivated coating
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Made to NZS 5467. Alloy steel, gold passivated coating.
Sizes and ratings
2 sizes, 8 mm to 10 mm. Minimum breaking load 5 to 7 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Welded.
- Rated with a 2:1 design factor between working load limit and minimum breaking load.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 70 Trailer Safety Chain |
| Pattern / standard | NZS 5467 |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 8 mm to 10 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 5 to 7 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Gold passivated coating |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-LR-CH-70TSCN546-8MM
- Size
- 8 mm
- Chain size
- 8 mm
- Min breaking load (t)
- 5
- Indus part no.IH-LR-CH-70TSCN546-10MM
- Size
- 10 mm
- Chain size
- 10 mm
- Min breaking load (t)
- 7
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. Min breaking load — Minimum breaking load. A test figure — never lift to it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is Grade 70 Trailer Safety Chain, NZS 5467 used for?▾
What sizes does Grade 70 Trailer Safety Chain, NZS 5467 come in?▾
How do I choose the right size of Grade 70 Trailer Safety Chain, NZS 5467?▾
What is the rated load of Grade 70 Trailer Safety Chain, NZS 5467?▾
What is Grade 70 Trailer Safety Chain, NZS 5467 made from, and what finish does it have?▾
What standard and certificate apply to Grade 70 Trailer Safety Chain, NZS 5467?▾
What should I use instead of Grade 70 Trailer Safety Chain, NZS 5467 for overhead lifting?▾
How should Grade 70 Trailer Safety Chain, NZS 5467 be inspected and looked after?▾
What do I need to send to get a quotation for Grade 70 Trailer Safety Chain, NZS 5467?▾
How does Grade 70 Trailer Safety Chain, NZS 5467 differ from Grade 70 Transport Chain — NACM 1990?▾
How are Grade 70 Trailer Safety Chain, NZS 5467 shipped, and can they be exported from Dubai?▾
Do you keep Grade 70 Trailer Safety Chain, NZS 5467 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Chain grades explained: Grade 30, 43, 70, 80 and 100, and which can lift overhead
Chain grade is a statement about the steel, and it decides two things: how much a given size carries, and whether it may be used overhead at all. Grades 30, 43 and 70 are for tie-down and towing. Only alloy Grade 80 and Grade 100 are lifting chain. Here is the whole ladder, with figures from our own tables.
8 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








