Grade L Short Link Chain — AS 2321, Galvanized, 0.25–5.61 t WLL

Grade L Short Link Chain (AS 2321), in 9 sizes, 5 mm to 24 mm, WLL 0.25 to 5.61 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade L Short Link Chain
- Pattern / standard: AS 2321
- Size range: 5 mm to 24 mm
- Working load limit: 0.25 to 5.61 t
- Size range
- 5 mm to 24 mm
- Working load limit
- 0.25 to 5.61 t
- Material
- Low-strength carbon steel
- Finish
- Electro-galvanized
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Made to AS 2321. Low-strength carbon steel, electro-galvanized.
Sizes and ratings
9 sizes, 5 mm to 24 mm. Working load limit 0.25 to 5.61 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
- Rated with a 5:1 design factor between working load limit and minimum breaking load.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade L Short Link Chain |
| Pattern / standard | AS 2321 |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5 mm to 24 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.25 to 5.61 t |
Construction
| Parameter | Value |
|---|---|
| Material | Low-strength carbon steel |
| Finish | Electro-galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-LR-CH-LSLCA2321-5MM
- Size
- 5 mm
- WLL (t)
- 0.25
- F (mm)
- 17.2
- R (mm)
- 14.6
- S (mm)
- 5
- Indus part no.IH-LR-CH-LSLCA2321-6MM
- Size
- 6 mm
- WLL (t)
- 0.4
- F (mm)
- 21.6
- R (mm)
- 18.8
- S (mm)
- 6.3
- Indus part no.IH-LR-CH-LSLCA2321-8MM
- Size
- 8 mm
- WLL (t)
- 0.64
- F (mm)
- 27
- R (mm)
- 23.8
- S (mm)
- 8
- Indus part no.IH-LR-CH-LSLCA2321-10MM
- Size
- 10 mm
- WLL (t)
- 1
- F (mm)
- 34.3
- R (mm)
- 29.8
- S (mm)
- 10
- Indus part no.IH-LR-CH-LSLCA2321-13MM
- Size
- 13 mm
- WLL (t)
- 1.7
- F (mm)
- 44.6
- R (mm)
- 38.8
- S (mm)
- 13
- Indus part no.IH-LR-CH-LSLCA2321-16MM
- Size
- 16 mm
- WLL (t)
- 2.58
- F (mm)
- 54.8
- R (mm)
- 47.8
- S (mm)
- 16
- Indus part no.IH-LR-CH-LSLCA2321-20MM
- Size
- 20 mm
- WLL (t)
- 4.03
- F (mm)
- 68.5
- R (mm)
- 59.2
- S (mm)
- 20
- Indus part no.IH-LR-CH-LSLCA2321-22MM
- Size
- 22 mm
- WLL (t)
- 5.06
- F (mm)
- 77
- R (mm)
- 64.9
- S (mm)
- 22
Show all 9 sizesShow fewer sizes
- Indus part no.IH-LR-CH-LSLCA2321-24MM
- Size
- 24 mm
- WLL (t)
- 5.61
- F (mm)
- 82.2
- R (mm)
- 71
- S (mm)
- 24
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. F — Dimension F on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. S — Dimension S on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Grade L Short Link Chain, AS 2321, Galvanized used for?▾
How do I read an Indus part number for Grade L Short Link Chain, AS 2321, Galvanized, such as IH-LR-CH-LSLCA2321-5MM?▾
What sizes does Grade L Short Link Chain, AS 2321, Galvanized come in?▾
How do I choose the right size of Grade L Short Link Chain, AS 2321, Galvanized?▾
What is the rated load of Grade L Short Link Chain, AS 2321, Galvanized?▾
What is Grade L Short Link Chain, AS 2321, Galvanized made from, and what finish does it have?▾
What standard and certificate apply to Grade L Short Link Chain, AS 2321, Galvanized?▾
What should I use instead of Grade L Short Link Chain, AS 2321, Galvanized for overhead lifting?▾
How should Grade L Short Link Chain, AS 2321, Galvanized be inspected and looked after?▾
How does Grade L Short Link Chain, AS 2321, Galvanized differ from Grade 30 Long Link Chain — Inch Sizes?▾
How are Grade L Short Link Chain, AS 2321, Galvanized shipped, and can they be exported from Dubai?▾
Do you keep Grade L Short Link Chain, AS 2321, Galvanized in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Chain grades explained: Grade 30, 43, 70, 80 and 100, and which can lift overhead
Chain grade is a statement about the steel, and it decides two things: how much a given size carries, and whether it may be used overhead at all. Grades 30, 43 and 70 are for tie-down and towing. Only alloy Grade 80 and Grade 100 are lifting chain. Here is the whole ladder, with figures from our own tables.
8 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read






