Grade 70 Transport Chain — Inch Sizes, 1,430–5,130 kg WLL

Grade 70 Transport Chain (ASTM Grade 70), in 4 sizes, 1/4″ to 1/2″, WLL 1,430 to 5,130 kg. Not for overhead lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 70 Transport Chain
- Pattern / standard: ASTM Grade 70
- Size range: 1/4″ to 1/2″
- Working load limit: 1,430 to 5,130 kg
- Size range
- 1/4″ to 1/2″
- Working load limit
- 1,430 to 5,130 kg
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Sized and rated to ASTM Grade 70.
Sizes and ratings
4 sizes, 1/4″ to 1/2″. Working load limit 1,430 to 5,130 kg. Minimum breaking load 12,600 to 45,200 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 70 Transport Chain |
| Pattern / standard | ASTM Grade 70 |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 1/2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1,430 to 5,130 kg |
| Minimum breaking load | 12,600 to 45,200 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-LR-CH-G70A-025
- Size
- 1/4″
- WLL (kg)
- 1,430
- WLL (lbs)
- 3,150
- Proof load (lbs)
- 6,300
- Proof load (kN)
- 28
- Min breaking load (lbs)
- 12,600
- Min breaking load (kN)
- 56.1
- Material dia. (mm)
- 7.1
- Indus part no.IH-LR-CH-G70A-031
- Size
- 5/16″
- WLL (kg)
- 2,130
- WLL (lbs)
- 4,700
- Proof load (lbs)
- 9,400
- Proof load (kN)
- 41.8
- Min breaking load (lbs)
- 18,800
- Min breaking load (kN)
- 83.6
- Material dia. (mm)
- 8.7
- Indus part no.IH-LR-CH-G70A-038
- Size
- 3/8″
- WLL (kg)
- 3,000
- WLL (lbs)
- 6,600
- Proof load (lbs)
- 13,200
- Proof load (kN)
- 58.7
- Min breaking load (lbs)
- 26,400
- Min breaking load (kN)
- 117.4
- Material dia. (mm)
- 10.3
- Indus part no.IH-LR-CH-G70A-050
- Size
- 1/2″
- WLL (kg)
- 5,130
- WLL (lbs)
- 11,300
- Proof load (lbs)
- 22,600
- Proof load (kN)
- 100.5
- Min breaking load (lbs)
- 45,200
- Min breaking load (kN)
- 201.1
- Material dia. (mm)
- 13.5
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Material dia. — Diameter of the link or bar stock. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Grade 70 Transport Chain, Inch Sizes used for?▾
How do I read an Indus part number for Grade 70 Transport Chain, Inch Sizes, such as IH-LR-CH-G70A-025?▾
What sizes does Grade 70 Transport Chain, Inch Sizes come in?▾
How do I choose the right size of Grade 70 Transport Chain, Inch Sizes?▾
What is the rated load of Grade 70 Transport Chain, Inch Sizes?▾
What material and finish is Grade 70 Transport Chain, Inch Sizes supplied in?▾
What standard and certificate apply to Grade 70 Transport Chain, Inch Sizes?▾
What should I use instead of Grade 70 Transport Chain, Inch Sizes for overhead lifting?▾
How should Grade 70 Transport Chain, Inch Sizes be inspected and looked after?▾
How does Grade 70 Transport Chain, Inch Sizes differ from Grade 43 High Test Chain — Inch Sizes?▾
How are Grade 70 Transport Chain, Inch Sizes shipped, and can they be exported from Dubai?▾
Do you keep Grade 70 Transport Chain, Inch Sizes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Chain grades explained: Grade 30, 43, 70, 80 and 100, and which can lift overhead
Chain grade is a statement about the steel, and it decides two things: how much a given size carries, and whether it may be used overhead at all. Grades 30, 43 and 70 are for tie-down and towing. Only alloy Grade 80 and Grade 100 are lifting chain. Here is the whole ladder, with figures from our own tables.
8 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read






