Short Link Chain — UK Pattern

Short Link Chain, UK Pattern, in 13 sizes, 1/8″ (3.2 mm) to 1″ (25.4 mm), breaking load 400 to 24,300 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Short link chain
- Pattern / standard: UK pattern welded link chain
- Size range: 1/8″ (3.2 mm) to 1″ (25.4 mm)
- Working load limit: Load rating on request
- Size range
- 1/8″ (3.2 mm) to 1″ (25.4 mm)
- Working load limit
- Load rating on request
- Material
- Carbon steel; stainless steel 316 on request
- Finish
- Self-colour, black or hot-dip galvanized
Product description
Welded steel short link chain to the UK pattern, in thirteen wire sizes from 1/8″ to 1″. It is supplied self-colour, black or hot-dip galvanized.
Sizes and ratings
13 sizes, 1/8″ (3.2 mm) to 1″ (25.4 mm). The manufacturer publishes a test load and a breaking load (400 to 24,300 kg) for each size, and no working load limit; a load rating is given on request. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in. The lettered dimensions refer to the dimension drawing in the gallery.
Choosing a size
A general-purpose chain for barriers, fencing, securing and guarding. The manufacturer publishes a test load and a breaking load for each size and no working load limit, so it is not a lifting chain; ask us for a load rating if the duty needs one.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Short link chain |
| Pattern / standard | UK pattern welded link chain |
| Sizes | 13 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/8″ (3.2 mm) to 1″ (25.4 mm) |
Performance
| Parameter | Value |
|---|---|
| Working load limit | Load rating on request |
| Minimum breaking load | 400 to 24,300 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel; stainless steel 316 on request |
| Finish | Self-colour, black or hot-dip galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
13 sizes- Indus part no.IH-LR-CH-UKSL-3P2MM
- Size
- 1/8″ (3.2 mm)
- Proof load (kg)
- 200
- Min breaking load (kg)
- 400
- Material dia. (mm)
- 3.2
- A (mm)
- 16
- B (mm)
- 12
- Indus part no.IH-LR-CH-UKSL-4MM
- Size
- 5/32″ (4 mm)
- Proof load (kg)
- 300
- Min breaking load (kg)
- 600
- Material dia. (mm)
- 4
- A (mm)
- 18.5
- B (mm)
- 14.5
- Indus part no.IH-LR-CH-UKSL-4P7MM
- Size
- 3/16″ (4.7 mm)
- Proof load (kg)
- 400
- Min breaking load (kg)
- 800
- Material dia. (mm)
- 4.7
- A (mm)
- 19
- B (mm)
- 17
- Indus part no.IH-LR-CH-UKSL-5P5MM
- Size
- 7/32″ (5.5 mm)
- Proof load (kg)
- 550
- Min breaking load (kg)
- 1,100
- Material dia. (mm)
- 5.5
- A (mm)
- 20
- B (mm)
- 19
- Indus part no.IH-LR-CH-UKSL-6P35MM
- Size
- 1/4″ (6.35 mm)
- Proof load (kg)
- 750
- Min breaking load (kg)
- 1,500
- Material dia. (mm)
- 6.35
- A (mm)
- 22
- B (mm)
- 21
- Indus part no.IH-LR-CH-UKSL-7P94MM
- Size
- 5/16″ (7.94 mm)
- Proof load (kg)
- 1,200
- Min breaking load (kg)
- 2,400
- Material dia. (mm)
- 7.94
- A (mm)
- 26
- B (mm)
- 26
- Indus part no.IH-LR-CH-UKSL-9P5MM
- Size
- 3/8″ (9.5 mm)
- Proof load (kg)
- 1,700
- Min breaking load (kg)
- 3,400
- Material dia. (mm)
- 9.5
- A (mm)
- 28
- B (mm)
- 32
- Indus part no.IH-LR-CH-UKSL-11P11MM
- Size
- 7/16″ (11.11 mm)
- Proof load (kg)
- 2,300
- Min breaking load (kg)
- 4,600
- Material dia. (mm)
- 11.11
- A (mm)
- 33
- B (mm)
- 36
Show all 13 sizesShow fewer sizes
- Indus part no.IH-LR-CH-UKSL-12P7MM
- Size
- 1/2″ (12.7 mm)
- Proof load (kg)
- 3,000
- Min breaking load (kg)
- 6,000
- Material dia. (mm)
- 12.7
- A (mm)
- 39
- B (mm)
- 43
- Indus part no.IH-LR-CH-UKSL-15P8MM
- Size
- 5/8″ (15.8 mm)
- Proof load (kg)
- 4,700
- Min breaking load (kg)
- 9,400
- Material dia. (mm)
- 15.8
- A (mm)
- 45
- B (mm)
- 53
- Indus part no.IH-LR-CH-UKSL-19MM
- Size
- 3/4″ (19 mm)
- Proof load (kg)
- 6,800
- Min breaking load (kg)
- 13,600
- Material dia. (mm)
- 19
- A (mm)
- 55
- B (mm)
- 63
- Indus part no.IH-LR-CH-UKSL-22P2MM
- Size
- 7/8″ (22.2 mm)
- Proof load (kg)
- 9,250
- Min breaking load (kg)
- 18,500
- Material dia. (mm)
- 22.2
- A (mm)
- 64
- B (mm)
- 74
- Indus part no.IH-LR-CH-UKSL-25P4MM
- Size
- 1″ (25.4 mm)
- Proof load (kg)
- 12,150
- Min breaking load (kg)
- 24,300
- Material dia. (mm)
- 25.4
- A (mm)
- 73
- B (mm)
- 84
Size — Nominal size as the manufacturer states it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. Material dia. — Diameter of the link or bar stock. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is Short Link Chain, UK Pattern used for?▾
How do I read an Indus part number for Short Link Chain, UK Pattern, such as IH-LR-CH-UKSL-3P2MM?▾
What sizes does Short Link Chain, UK Pattern come in?▾
How do I choose the right size of Short Link Chain, UK Pattern?▾
What is the rated load of Short Link Chain, UK Pattern?▾
What is Short Link Chain, UK Pattern made from, and what finish does it have?▾
What standard and certificate apply to Short Link Chain, UK Pattern?▾
What should I use instead of Short Link Chain, UK Pattern for overhead lifting?▾
How should Short Link Chain, UK Pattern be inspected and looked after?▾
How does Short Link Chain, UK Pattern differ from Grade L Short Link Chain — AS 2321, Galvanized?▾
How are Short Link Chain, UK Pattern shipped, and can they be exported from Dubai?▾
Do you keep Short Link Chain, UK Pattern in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Chain grades explained: Grade 30, 43, 70, 80 and 100, and which can lift overhead
Chain grade is a statement about the steel, and it decides two things: how much a given size carries, and whether it may be used overhead at all. Grades 30, 43 and 70 are for tie-down and towing. Only alloy Grade 80 and Grade 100 are lifting chain. Here is the whole ladder, with figures from our own tables.
8 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








