Proof Coil Chain — Australian Standard, 0.05–5.34 t WLL

Proof Coil Chain (Australian standard), in 27 sizes, 3 mm to 24 mm, WLL 0.05 to 5.34 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Proof Coil Chain
- Pattern / standard: Australian standard
- Size range: 3 mm to 24 mm
- Working load limit: 0.05 to 5.34 t
- Size range
- 3 mm to 24 mm
- Working load limit
- 0.05 to 5.34 t
- Material
- Mild steel
- Finish
- Electro-galvanized / hot-dip galvanized
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Built to the Australian standard. Mild steel, electro-galvanized / hot-dip galvanized.
Sizes and ratings
27 sizes, 3 mm to 24 mm. Working load limit 0.05 to 5.34 t. Available as: short link, regular link, long link. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Welded.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Proof Coil Chain |
| Pattern / standard | Australian standard |
| Sizes | 27 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 mm to 24 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.05 to 5.34 t |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Electro-galvanized / hot-dip galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
27 sizes- Indus part no.IH-LR-CH-PCCAS-5MM-SL
- Size
- 5 mm
- Type
- Short link
- Chain size
- 5 mm
- WLL (t)
- 0.24
- Inside length (mm)
- 370.8
- Outside width (mm)
- 17.2
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-6MM-SL
- Size
- 6 mm
- Type
- Short link
- Chain size
- 6 mm
- WLL (t)
- 0.32
- Inside length (mm)
- 480.1
- Outside width (mm)
- 21.5
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-8MM-SL
- Size
- 8 mm
- Type
- Short link
- Chain size
- 8 mm
- WLL (t)
- 0.53
- Inside length (mm)
- 609.6
- Outside width (mm)
- 27.5
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-10MM-SL
- Size
- 10 mm
- Type
- Short link
- Chain size
- 10 mm
- WLL (t)
- 0.83
- Inside length (mm)
- 749.3
- Outside width (mm)
- 33.5
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-12MM-SL
- Size
- 12 mm
- Type
- Short link
- Chain size
- 12 mm
- WLL (t)
- 1.5
- Inside length (mm)
- 952.5
- Outside width (mm)
- 40.6
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-13MM-SL
- Size
- 13 mm
- Type
- Short link
- Chain size
- 13 mm
- WLL (t)
- 1.6
- Inside length (mm)
- 972.8
- Outside width (mm)
- 44.6
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-16MM-SL
- Size
- 16 mm
- Type
- Short link
- Chain size
- 16 mm
- WLL (t)
- 2.31
- Inside length (mm)
- 1,194
- Outside width (mm)
- 54
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-20MM-SL
- Size
- 20 mm
- Type
- Short link
- Chain size
- 20 mm
- WLL (t)
- 3.45
- Inside length (mm)
- 1,504
- Outside width (mm)
- 68.5
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
Show all 27 sizesShow fewer sizes
- Indus part no.IH-LR-CH-PCCAS-22MM-SL
- Size
- 22 mm
- Type
- Short link
- Chain size
- 22 mm
- WLL (t)
- 4.55
- Inside length (mm)
- 1,648
- Outside width (mm)
- 77
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-24MM-SL
- Size
- 24 mm
- Type
- Short link
- Chain size
- 24 mm
- WLL (t)
- 5.34
- Inside length (mm)
- 1,803
- Outside width (mm)
- 82.2
- F (mm)
- —
- R (mm)
- —
- S (mm)
- —
- Indus part no.IH-LR-CH-PCCAS-3MM-RL
- Size
- 3 mm
- Type
- Regular link
- Chain size
- 3 mm
- WLL (t)
- 0.06
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 13.1
- R (mm)
- 15.7
- S (mm)
- 3.15
- Indus part no.IH-LR-CH-PCCAS-4MM-RL
- Size
- 4 mm
- Type
- Regular link
- Chain size
- 4 mm
- WLL (t)
- 0.11
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 16
- R (mm)
- 18.6
- S (mm)
- 4
- Indus part no.IH-LR-CH-PCCAS-5MM-RL
- Size
- 5 mm
- Type
- Regular link
- Chain size
- 5 mm
- WLL (t)
- 0.19
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 19.4
- R (mm)
- 22
- S (mm)
- 5
- Indus part no.IH-LR-CH-PCCAS-6MM-RL
- Size
- 6 mm
- Type
- Regular link
- Chain size
- 6 mm
- WLL (t)
- 0.32
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 23.5
- R (mm)
- 26.1
- S (mm)
- 6.3
- Indus part no.IH-LR-CH-PCCAS-8MM-RL
- Size
- 8 mm
- Type
- Regular link
- Chain size
- 8 mm
- WLL (t)
- 0.53
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 29.5
- R (mm)
- 32.2
- S (mm)
- 8
- Indus part no.IH-LR-CH-PCCAS-10MM-RL
- Size
- 10 mm
- Type
- Regular link
- Chain size
- 10 mm
- WLL (t)
- 0.83
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 36.2
- R (mm)
- 39.1
- S (mm)
- 10
- Indus part no.IH-LR-CH-PCCAS-12MM-RL
- Size
- 12 mm
- Type
- Regular link
- Chain size
- 12 mm
- WLL (t)
- 1.35
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 44
- R (mm)
- 46
- S (mm)
- 12
- Indus part no.IH-LR-CH-PCCAS-13MM-RL
- Size
- 13 mm
- Type
- Regular link
- Chain size
- 13 mm
- WLL (t)
- 1.5
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 46.1
- R (mm)
- 49.1
- S (mm)
- 13
- Indus part no.IH-LR-CH-PCCAS-16MM-RL
- Size
- 16 mm
- Type
- Regular link
- Chain size
- 16 mm
- WLL (t)
- 2.31
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 56.5
- R (mm)
- 59.6
- S (mm)
- 16
- Indus part no.IH-LR-CH-PCCAS-20MM-RL
- Size
- 20 mm
- Type
- Regular link
- Chain size
- 20 mm
- WLL (t)
- 3.67
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 70
- R (mm)
- 73.3
- S (mm)
- 20
- Indus part no.IH-LR-CH-PCCAS-24MM-RL
- Size
- 24 mm
- Type
- Regular link
- Chain size
- 24 mm
- WLL (t)
- 5.31
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 83.6
- R (mm)
- 87
- S (mm)
- 24
- Indus part no.IH-LR-CH-PCCAS-4MM-LL
- Size
- 4 mm
- Type
- Long link
- Chain size
- 4 mm
- WLL (t)
- 0.05
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 15.7
- R (mm)
- 22.1
- S (mm)
- 3.15
- Indus part no.IH-LR-CH-PCCAS-4MM-LL-2
- Size
- 4 mm
- Type
- Long link
- Chain size
- 4 mm
- WLL (t)
- 0.09
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 18.6
- R (mm)
- 25.4
- S (mm)
- 4
- Indus part no.IH-LR-CH-PCCAS-5MM-LL
- Size
- 5 mm
- Type
- Long link
- Chain size
- 5 mm
- WLL (t)
- 0.19
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 21.8
- R (mm)
- 29.3
- S (mm)
- 5
- Indus part no.IH-LR-CH-PCCAS-6MM-LL
- Size
- 6 mm
- Type
- Long link
- Chain size
- 6 mm
- WLL (t)
- 0.32
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 26.1
- R (mm)
- 34.5
- S (mm)
- 6.3
- Indus part no.IH-LR-CH-PCCAS-8MM-LL
- Size
- 8 mm
- Type
- Long link
- Chain size
- 8 mm
- WLL (t)
- 0.53
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 31.9
- R (mm)
- 41.2
- S (mm)
- 8
- Indus part no.IH-LR-CH-PCCAS-10MM-LL
- Size
- 10 mm
- Type
- Long link
- Chain size
- 10 mm
- WLL (t)
- 0.83
- Inside length (mm)
- —
- Outside width (mm)
- —
- F (mm)
- 38.7
- R (mm)
- 49
- S (mm)
- 10
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Chain size — Chain the fitting is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Inside length — Inside length of the link or bow. Outside width — Outside width of the link. F — Dimension F on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. S — Dimension S on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Proof Coil Chain, Australian Standard used for?▾
How do I read an Indus part number for Proof Coil Chain, Australian Standard, such as IH-LR-CH-PCCAS-5MM-SL?▾
What sizes does Proof Coil Chain, Australian Standard come in?▾
How do I choose the right size of Proof Coil Chain, Australian Standard?▾
What is the rated load of Proof Coil Chain, Australian Standard?▾
What is Proof Coil Chain, Australian Standard made from, and what finish does it have?▾
What standard and certificate apply to Proof Coil Chain, Australian Standard?▾
What should I use instead of Proof Coil Chain, Australian Standard for overhead lifting?▾
How should Proof Coil Chain, Australian Standard be inspected and looked after?▾
How does Proof Coil Chain, Australian Standard differ from Grade 30 Proof Coil Chain — Inch Sizes?▾
How are Proof Coil Chain, Australian Standard shipped, and can they be exported from Dubai?▾
Do you keep Proof Coil Chain, Australian Standard in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Chain grades explained: Grade 30, 43, 70, 80 and 100, and which can lift overhead
Chain grade is a statement about the steel, and it decides two things: how much a given size carries, and whether it may be used overhead at all. Grades 30, 43 and 70 are for tie-down and towing. Only alloy Grade 80 and Grade 100 are lifting chain. Here is the whole ladder, with figures from our own tables.
8 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read






