Grade 30 Proof Coil Chain — Inch Sizes, 170–4,420 kg WLL

Grade 30 Proof Coil Chain (ASTM Grade 30), in 9 sizes, 1/8″ to 3/4″, WLL 170 to 4,420 kg. Not for overhead lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 30 Proof Coil Chain
- Pattern / standard: ASTM Grade 30
- Size range: 1/8″ to 3/4″
- Working load limit: 170 to 4,420 kg
- Size range
- 1/8″ to 3/4″
- Working load limit
- 170 to 4,420 kg
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Sized and rated to ASTM Grade 30.
Sizes and ratings
9 sizes, 1/8″ to 3/4″. Working load limit 170 to 4,420 kg. Minimum breaking load 1,600 to 39,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 30 Proof Coil Chain |
| Pattern / standard | ASTM Grade 30 |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/8″ to 3/4″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 170 to 4,420 kg |
| Minimum breaking load | 1,600 to 39,000 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-LR-CH-G30A-012
- Size
- 1/8″
- WLL (kg)
- 170
- WLL (lbs)
- 375
- Proof load (lbs)
- 800
- Proof load (kN)
- 3.6
- Min breaking load (lbs)
- 1,600
- Min breaking load (kN)
- 7.1
- Material dia. (mm)
- 4
- Indus part no.IH-LR-CH-G30A-019
- Size
- 3/16″
- WLL (kg)
- 340
- WLL (lbs)
- 750
- Proof load (lbs)
- 1,500
- Proof load (kN)
- 6.7
- Min breaking load (lbs)
- 3,000
- Min breaking load (kN)
- 13.3
- Material dia. (mm)
- 5.5
- Indus part no.IH-LR-CH-G30A-025
- Size
- 1/4″
- WLL (kg)
- 570
- WLL (lbs)
- 1,250
- Proof load (lbs)
- 2,500
- Proof load (kN)
- 11.1
- Min breaking load (lbs)
- 5,000
- Min breaking load (kN)
- 22.2
- Material dia. (mm)
- 7.1
- Indus part no.IH-LR-CH-G30A-031
- Size
- 5/16″
- WLL (kg)
- 860
- WLL (lbs)
- 1,900
- Proof load (lbs)
- 3,800
- Proof load (kN)
- 16.9
- Min breaking load (lbs)
- 7,600
- Min breaking load (kN)
- 33.8
- Material dia. (mm)
- 8.7
- Indus part no.IH-LR-CH-G30A-038
- Size
- 3/8″
- WLL (kg)
- 1,200
- WLL (lbs)
- 2,650
- Proof load (lbs)
- 5,300
- Proof load (kN)
- 23.6
- Min breaking load (lbs)
- 10,600
- Min breaking load (kN)
- 47.2
- Material dia. (mm)
- 10.3
- Indus part no.IH-LR-CH-G30A-044
- Size
- 7/16″
- WLL (kg)
- 1,590
- WLL (lbs)
- 3,500
- Proof load (lbs)
- 7,000
- Proof load (kN)
- 31.1
- Min breaking load (lbs)
- 14,000
- Min breaking load (kN)
- 62.3
- Material dia. (mm)
- 11.9
- Indus part no.IH-LR-CH-G30A-050
- Size
- 1/2″
- WLL (kg)
- 2,040
- WLL (lbs)
- 4,500
- Proof load (lbs)
- 9,000
- Proof load (kN)
- 40
- Min breaking load (lbs)
- 18,000
- Min breaking load (kN)
- 80.1
- Material dia. (mm)
- 13.5
- Indus part no.IH-LR-CH-G30A-062
- Size
- 5/8″
- WLL (kg)
- 3,130
- WLL (lbs)
- 6,900
- Proof load (lbs)
- 13,800
- Proof load (kN)
- 61.4
- Min breaking load (lbs)
- 27,600
- Min breaking load (kN)
- 122.8
- Material dia. (mm)
- 16.7
Show all 9 sizesShow fewer sizes
- Indus part no.IH-LR-CH-G30A-075
- Size
- 3/4″
- WLL (kg)
- 4,420
- WLL (lbs)
- 9,750
- Proof load (lbs)
- 19,500
- Proof load (kN)
- 86.7
- Min breaking load (lbs)
- 39,000
- Min breaking load (kN)
- 173.5
- Material dia. (mm)
- 19.8
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Material dia. — Diameter of the link or bar stock. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Grade 30 Proof Coil Chain, Inch Sizes used for?▾
How do I read an Indus part number for Grade 30 Proof Coil Chain, Inch Sizes, such as IH-LR-CH-G30A-012?▾
What sizes does Grade 30 Proof Coil Chain, Inch Sizes come in?▾
How do I choose the right size of Grade 30 Proof Coil Chain, Inch Sizes?▾
What is the rated load of Grade 30 Proof Coil Chain, Inch Sizes?▾
What material and finish is Grade 30 Proof Coil Chain, Inch Sizes supplied in?▾
What standard and certificate apply to Grade 30 Proof Coil Chain, Inch Sizes?▾
What should I use instead of Grade 30 Proof Coil Chain, Inch Sizes for overhead lifting?▾
How should Grade 30 Proof Coil Chain, Inch Sizes be inspected and looked after?▾
How does Grade 30 Proof Coil Chain, Inch Sizes differ from Grade 30 Long Link Chain — Inch Sizes?▾
How are Grade 30 Proof Coil Chain, Inch Sizes shipped, and can they be exported from Dubai?▾
Do you keep Grade 30 Proof Coil Chain, Inch Sizes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








