Grade 70 Chain Anchor with Delta Ring and Grab Hook — 7.938–9.525 mm

Grade 70 Chain Anchor with Delta Ring and Grab Hook, in 7 sizes, 7.938 mm to 9.525 mm. Not rated for lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 70 Chain Anchor with Delta Ring and Grab Hook
- Size range: 7.938 mm to 9.525 mm
- Size range
- 7.938 mm to 9.525 mm
- Material
- Alloy steel
- Finish
- Electro-galvanized
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Alloy steel, electro-galvanized.
Sizes and ratings
7 sizes, 7.938 mm to 9.525 mm. Minimum breaking load 10,000 to 20,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded, drop forged.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 70 Chain Anchor with Delta Ring and Grab Hook |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 7.938 mm to 9.525 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 10,000 to 20,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Electro-galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-LR-CH-70CADRGH-7P938MM
- Size
- 7.938 mm
- Min breaking load (lbs)
- 10,000
- A (mm)
- 50.8
- B1 (mm)
- 7.938
- B2 (mm)
- 7.938
- D (mm)
- 7.938
- Weight (kg)
- 0.9
- Indus part no.IH-LR-CH-70CADRGH-9P525MM
- Size
- 9.525 mm
- Min breaking load (lbs)
- 10,000
- A (mm)
- 50.8
- B1 (mm)
- 9.525
- B2 (mm)
- 9.525
- D (mm)
- 9.525
- Weight (kg)
- 1.19
- Indus part no.IH-LR-CH-70CADRGH-7P938MM-2
- Size
- 7.938 mm
- Min breaking load (lbs)
- 16,200
- A (mm)
- 76.2
- B1 (mm)
- 11.11
- B2 (mm)
- 11.11
- D (mm)
- 7.938
- Weight (kg)
- 1.32
- Indus part no.IH-LR-CH-70CADRGH-9P525MM-2
- Size
- 9.525 mm
- Min breaking load (lbs)
- 16,200
- A (mm)
- 76.2
- B1 (mm)
- 11.11
- B2 (mm)
- 11.11
- D (mm)
- 9.525
- Weight (kg)
- 1.48
- Indus part no.IH-LR-CH-70CADRGH-9P525MM-3
- Size
- 9.525 mm
- Min breaking load (lbs)
- 16,200
- A (mm)
- 76.2
- B1 (mm)
- 11.11
- B2 (mm)
- 11.11
- D (mm)
- 9.525
- Weight (kg)
- 1.28
- Indus part no.IH-LR-CH-70CADRGH-9P525MM-4
- Size
- 9.525 mm
- Min breaking load (lbs)
- 16,200
- A (mm)
- 76.2
- B1 (mm)
- 11.11
- B2 (mm)
- 11.11
- D (mm)
- 9.525
- Weight (kg)
- 1.7
- Indus part no.IH-LR-CH-70CADRGH-9P525MM-5
- Size
- 9.525 mm
- Min breaking load (lbs)
- 20,000
- A (mm)
- 101.6
- B1 (mm)
- 11.11
- B2 (mm)
- 11.11
- D (mm)
- 9.525
- Weight (kg)
- 1.68
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B1 — Dimension B1 on the manufacturer dimension drawing. B2 — Dimension B2 on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is Grade 70 Chain Anchor with Delta Ring and Grab Hook used for?▾
How do I read an Indus part number for Grade 70 Chain Anchor with Delta Ring and Grab Hook, such as IH-LR-CH-70CADRGH-7P938MM?▾
What sizes does Grade 70 Chain Anchor with Delta Ring and Grab Hook come in?▾
How do I choose the right size of Grade 70 Chain Anchor with Delta Ring and Grab Hook?▾
What is the rated load of Grade 70 Chain Anchor with Delta Ring and Grab Hook?▾
What is Grade 70 Chain Anchor with Delta Ring and Grab Hook made from, and what finish does it have?▾
What standard and certificate apply to Grade 70 Chain Anchor with Delta Ring and Grab Hook?▾
What should I use instead of Grade 70 Chain Anchor with Delta Ring and Grab Hook for overhead lifting?▾
How should Grade 70 Chain Anchor with Delta Ring and Grab Hook be inspected and looked after?▾
How does Grade 70 Chain Anchor with Delta Ring and Grab Hook differ from Binder Chain with Hooks — Grade 43 and Grade 70?▾
How are Grade 70 Chain Anchor with Delta Ring and Grab Hook shipped, and can they be exported from Dubai?▾
Do you keep Grade 70 Chain Anchor with Delta Ring and Grab Hook in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Chain grades explained: Grade 30, 43, 70, 80 and 100, and which can lift overhead
Chain grade is a statement about the steel, and it decides two things: how much a given size carries, and whether it may be used overhead at all. Grades 30, 43 and 70 are for tie-down and towing. Only alloy Grade 80 and Grade 100 are lifting chain. Here is the whole ladder, with figures from our own tables.
8 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








