Clevis Lug Link, Grade 70 — AS/NZS 4344
Clevis Lug Link, Grade 70 (AS/NZS 4344), in 3 sizes, 8 mm to 13 mm, LC 3,800 to 9,000 kg. Not rated for lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Clevis Lug Link, Grade 70
- Pattern / standard: AS/NZS 4344
- Size range: 8 mm to 13 mm
- Size range
- 8 mm to 13 mm
- Material
- Alloy steel
- Finish
- Gold zinc plated, hot-dip galvanized
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Made to AS/NZS 4344. Alloy steel, gold zinc plated, hot-dip galvanized.
Sizes and ratings
3 sizes, 8 mm to 13 mm. Lashing capacity 3,800 to 9,000 kg. Minimum breaking load 7,600 to 18,000 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Clevis Lug Link, Grade 70 |
| Pattern / standard | AS/NZS 4344 |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 8 mm to 13 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 7,600 to 18,000 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Gold zinc plated, hot-dip galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes| Indus part no. | Size | Min breaking load (kg) | LC (kg) | A (mm) | B (mm) | D (mm) | K (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-CH-CLL70ASN4-8MM | 8 mm | 7,600 | 3,800 | 12 | 35 | 86 | 108 | 142 | 0.555 |
| IH-LR-CH-CLL70ASN4-10MM | 10 mm | 12,000 | 6,000 | 13.5 | 36 | 95 | 119 | 156 | 0.63 |
| IH-LR-CH-CLL70ASN4-13MM | 13 mm | 18,000 | 9,000 | 18 | 48.5 | 100 | 132 | 175 | 0.93 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. LC — Lashing capacity — the most a tie-down may hold in service when securing a load (EN 12195). A load-securing figure, not a lifting rating. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
LC is the lashing capacity — what a tie-down may hold when securing a load under EN 12195. It is not a lifting rating: never lift with load-securing equipment.
What sizes does the clevis lug link, Grade 70 come in?▾
Can Grade 30, 43 or 70 chain be used for lifting?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Double Loop Chain — US Standard Sizes
Grade 30 Proof Coil Chain — Inch Sizes
Grade 30 Proof Coil Chain — NACM 1990
Grade 43 High Test Chain — Inch Sizes
Grade 43 High Test Chain — NACM 1990
Grade 43 High Test Chain — NACM 1996 / 2003
Grade 70 Transport Chain — Inch Sizes
