Machine Chain, Twist Link — NACM 1990, 93–400 kg WLL

Machine Chain, Twist Link (NACM 1990 machine chain), in 9 sizes, 3 mm to 6.4 mm, WLL 93 to 400 kg. Not for overhead lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Machine Chain, Twist Link
- Pattern / standard: NACM 1990 machine chain
- Size range: 3 mm to 6.4 mm
- Working load limit: 93 to 400 kg
- Size range
- 3 mm to 6.4 mm
- Working load limit
- 93 to 400 kg
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Sized and rated to NACM 1990 machine chain.
Sizes and ratings
9 sizes, 3 mm to 6.4 mm. Working load limit 93 to 400 kg. Minimum breaking load 820 to 3,520 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Machine Chain, Twist Link |
| Pattern / standard | NACM 1990 machine chain |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 mm to 6.4 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 93 to 400 kg |
| Minimum breaking load | 820 to 3,520 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-LR-CH-MTL-3MM
- Size
- 3 mm
- WLL (kg)
- 93
- WLL (lbs)
- 205
- Min breaking load (lbs)
- 820
- Min breaking load (kN)
- 3.64
- Material dia. (mm)
- 3
- Inside length (mm)
- 13.2
- Inside width (mm)
- 4.3
- Indus part no.IH-LR-CH-MTL-3.4MM
- Size
- 3.4 mm
- WLL (kg)
- 116
- WLL (lbs)
- 255
- Min breaking load (lbs)
- 1,020
- Min breaking load (kN)
- 4.53
- Material dia. (mm)
- 3.4
- Inside length (mm)
- 14.2
- Inside width (mm)
- 5.1
- Indus part no.IH-LR-CH-MTL-3.8MM
- Size
- 3.8 mm
- WLL (kg)
- 141
- WLL (lbs)
- 310
- Min breaking load (lbs)
- 1,240
- Min breaking load (kN)
- 5.51
- Material dia. (mm)
- 3.8
- Inside length (mm)
- 14.7
- Inside width (mm)
- 5.3
- Indus part no.IH-LR-CH-MTL-4.1MM
- Size
- 4.1 mm
- WLL (kg)
- 168
- WLL (lbs)
- 370
- Min breaking load (lbs)
- 1,480
- Min breaking load (kN)
- 6.58
- Material dia. (mm)
- 4.1
- Inside length (mm)
- 15
- Inside width (mm)
- 6.1
- Indus part no.IH-LR-CH-MTL-4.5MM
- Size
- 4.5 mm
- WLL (kg)
- 200
- WLL (lbs)
- 440
- Min breaking load (lbs)
- 1,760
- Min breaking load (kN)
- 7.82
- Material dia. (mm)
- 4.5
- Inside length (mm)
- 17.3
- Inside width (mm)
- 6.6
- Indus part no.IH-LR-CH-MTL-4.9MM
- Size
- 4.9 mm
- WLL (kg)
- 236
- WLL (lbs)
- 520
- Min breaking load (lbs)
- 2,080
- Min breaking load (kN)
- 9.24
- Material dia. (mm)
- 4.9
- Inside length (mm)
- 18.5
- Inside width (mm)
- 7.1
- Indus part no.IH-LR-CH-MTL-5.3MM
- Size
- 5.3 mm
- WLL (kg)
- 274
- WLL (lbs)
- 605
- Min breaking load (lbs)
- 2,420
- Min breaking load (kN)
- 10.76
- Material dia. (mm)
- 5.3
- Inside length (mm)
- 20.3
- Inside width (mm)
- 7.9
- Indus part no.IH-LR-CH-MTL-5.5MM
- Size
- 5.5 mm
- WLL (kg)
- 304
- WLL (lbs)
- 670
- Min breaking load (lbs)
- 2,680
- Min breaking load (kN)
- 11.91
- Material dia. (mm)
- 5.5
- Inside length (mm)
- 22.6
- Inside width (mm)
- 8.1
Show all 9 sizesShow fewer sizes
- Indus part no.IH-LR-CH-MTL-6.4MM
- Size
- 6.4 mm
- WLL (kg)
- 400
- WLL (lbs)
- 880
- Min breaking load (lbs)
- 3,520
- Min breaking load (kN)
- 15.64
- Material dia. (mm)
- 6.3
- Inside length (mm)
- 25.4
- Inside width (mm)
- 9.4
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Material dia. — Diameter of the link or bar stock. Inside length — Inside length of the link or bow. Inside width — Inside width of the link or jaw. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Machine Chain, Twist Link, NACM 1990 used for?▾
How do I read an Indus part number for Machine Chain, Twist Link, NACM 1990, such as IH-LR-CH-MTL-3MM?▾
What sizes does Machine Chain, Twist Link, NACM 1990 come in?▾
How do I choose the right size of Machine Chain, Twist Link, NACM 1990?▾
What is the rated load of Machine Chain, Twist Link, NACM 1990?▾
What material and finish is Machine Chain, Twist Link, NACM 1990 supplied in?▾
What standard and certificate apply to Machine Chain, Twist Link, NACM 1990?▾
What should I use instead of Machine Chain, Twist Link, NACM 1990 for overhead lifting?▾
How should Machine Chain, Twist Link, NACM 1990 be inspected and looked after?▾
How does Machine Chain, Twist Link, NACM 1990 differ from Machine Chain, Straight Link — NACM 1990?▾
How are Machine Chain, Twist Link, NACM 1990 shipped, and can they be exported from Dubai?▾
Do you keep Machine Chain, Twist Link, NACM 1990 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Chain grades explained: Grade 30, 43, 70, 80 and 100, and which can lift overhead
Chain grade is a statement about the steel, and it decides two things: how much a given size carries, and whether it may be used overhead at all. Grades 30, 43 and 70 are for tie-down and towing. Only alloy Grade 80 and Grade 100 are lifting chain. Here is the whole ladder, with figures from our own tables.
8 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read






