Grade 70 Chain — AS/NZS 4344, 6–13 mm

Grade 70 Chain (AS/NZS 4344), in 6 sizes, 6 mm to 13 mm, LC 2,300 to 9,000 kg. Not rated for lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 70 Chain
- Pattern / standard: AS/NZS 4344
- Size range: 6 mm to 13 mm
- Size range
- 6 mm to 13 mm
- Material
- Alloy steel
- Finish
- Yellow or white zinc chromate finish
Product description
Commercial and transport chain for tie-down, towing and general duty — not for overhead lifting. Made to AS/NZS 4344. Alloy steel, yellow or white zinc chromate finish.
Sizes and ratings
6 sizes, 6 mm to 13 mm. Lashing capacity 2,300 to 9,000 kg. Minimum breaking load 44.1 to 176 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
Choosing a size
Select on the working load limit for the tie-down or duty. For overhead lifting use Grade 80 or Grade 100 alloy chain instead.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 70 Chain |
| Pattern / standard | AS/NZS 4344 |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm to 13 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 44.1 to 176 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Yellow or white zinc chromate finish |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-CH-70CASN434-6MM
- Size
- 6 mm
- Chain size
- 6 mm
- Min breaking load (kN)
- 44.1
- LC (kg)
- 2,300
- F max (mm)
- 22.05
- R max (mm)
- 18.9
- R min (mm)
- 17.33
- Weight (kg/m)
- 0.81
- Indus part no.IH-LR-CH-70CASN434-7MM
- Size
- 7 mm
- Chain size
- 7 mm
- Min breaking load (kN)
- 55.9
- LC (kg)
- 2,900
- F max (mm)
- 24.85
- R max (mm)
- 21.3
- R min (mm)
- 19.53
- Weight (kg/m)
- 1.09
- Indus part no.IH-LR-CH-70CASN434-7P3MM
- Size
- 7.3 mm
- Chain size
- 7.3 mm
- Min breaking load (kN)
- 58.9
- LC (kg)
- 3,000
- F max (mm)
- 26.6
- R max (mm)
- 24
- R min (mm)
- 22
- Weight (kg/m)
- 1.16
- Indus part no.IH-LR-CH-70CASN434-8MM
- Size
- 8 mm
- Chain size
- 8 mm
- Min breaking load (kN)
- 73.6
- LC (kg)
- 3,800
- F max (mm)
- 28
- R max (mm)
- 24
- R min (mm)
- 22
- Weight (kg/m)
- 1.42
- Indus part no.IH-LR-CH-70CASN434-10MM
- Size
- 10 mm
- Chain size
- 10 mm
- Min breaking load (kN)
- 118
- LC (kg)
- 6,000
- F max (mm)
- 35
- R max (mm)
- 30
- R min (mm)
- 27.5
- Weight (kg/m)
- 2.22
- Indus part no.IH-LR-CH-70CASN434-13MM
- Size
- 13 mm
- Chain size
- 13 mm
- Min breaking load (kN)
- 176
- LC (kg)
- 9,000
- F max (mm)
- 45.5
- R max (mm)
- 39
- R min (mm)
- 35.75
- Weight (kg/m)
- 3.75
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. Min breaking load — Minimum breaking load. A test figure — never lift to it. LC — Lashing capacity — the most a tie-down may hold in service when securing a load (EN 12195). A load-securing figure, not a lifting rating. F max — Dimension F max on the manufacturer dimension drawing. R max — Dimension R max on the manufacturer dimension drawing. R min — Dimension R min on the manufacturer dimension drawing. Weight — Weight per metre, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
LC is the lashing capacity — what a tie-down may hold when securing a load under EN 12195. It is not a lifting rating: never lift with load-securing equipment.
What is Grade 70 Chain, AS/NZS 4344 used for?▾
How do I read an Indus part number for Grade 70 Chain, AS/NZS 4344, such as IH-LR-CH-70CASN434-6MM?▾
What sizes does Grade 70 Chain, AS/NZS 4344 come in?▾
How do I choose the right size of Grade 70 Chain, AS/NZS 4344?▾
What is the rated load of Grade 70 Chain, AS/NZS 4344?▾
What is Grade 70 Chain, AS/NZS 4344 made from, and what finish does it have?▾
What standard and certificate apply to Grade 70 Chain, AS/NZS 4344?▾
What should I use instead of Grade 70 Chain, AS/NZS 4344 for overhead lifting?▾
How should Grade 70 Chain, AS/NZS 4344 be inspected and looked after?▾
How does Grade 70 Chain, AS/NZS 4344 differ from Clevis Lug Link, Grade 70 — AS/NZS 4344?▾
How are Grade 70 Chain, AS/NZS 4344 shipped, and can they be exported from Dubai?▾
Do you keep Grade 70 Chain, AS/NZS 4344 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








