- 01Wafer or lug butterfly valve — what is the difference?
- A wafer valve is clamped between two pipe flanges by bolts that pass around its body, so both flanges must stay in place. A lug valve has threaded lugs that each flange bolts into separately, so the downstream pipe can be removed with the line still live on the other side, or the valve used at the end of a line. Check the maker's end-of-line pressure rating before using a lug valve that way.
- 02Which seat material should a butterfly valve have?
- Choose it by the medium and temperature. EPDM suits water, glycol and many mild chemicals but not oils; Buna-N (nitrile) suits oils, fuels and air; Viton (FKM) covers higher temperatures and many aggressive chemicals; PTFE-lined valves are used for corrosive, high-purity and food service. Tell us the fluid, its concentration and temperature and we confirm the seat.
- 03Can a butterfly valve be used for throttling?
- Yes, within limits. Butterfly valves throttle reasonably between about a third and fully open, and DEMCO memory-stop and 10-position locking handles hold a set position. Running almost closed causes high velocity, noise, cavitation and seat wear, so a valve that spends its life throttling hard should be a dedicated control valve.
- 04What does CETOP 3 or NG6 mean on a hydraulic valve?
- They are names for the same mounting pattern: the ISO 4401-03 interface, also called D03. CETOP 5, NG10 and D05 are the larger ISO 4401-05 interface. Any valve made to the pattern bolts to a subplate or manifold of the same size, whatever its maker.
- 05What does a Yuken part number such as DSG-01-3C4-D24-50 mean?
- DSG is Yuken's solenoid-operated directional valve; 01 is the size, the CETOP 3 / NG6 pattern; 3 means three positions, and C4 is the spool type, which sets the flow paths in the centre position; D24 is a 24 V DC coil; and 50 is the design number. A 2B2 in the same place is a two-position, spring-offset valve. Send the full code from the valve's nameplate when ordering a replacement.
- 06Do you supply actuators and gear operators for butterfly valves?
- Yes. The DEMCO range includes double-acting and spring-return pneumatic actuators for 2″ to 24″ valves, worm-gear operators for 2″ to 36″, stem extensions, and lever, square-nut and locking handles for 2″ to 12″.