Sun Hydraulics 2-Way, Poppet Directional Valve with Integral T-8A Control Cavity, Control 2-1 — DFCB8, DFDB8, DFEB8, Series 1 to 3

Sun Hydraulics 2-Way, Poppet Directional Valve with Integral T-8A Control Cavity, Control 2-1: DFCB8, DFDB8, DFEB8, series 1 to 3, 15 gpm to 60 gpm (60 L/min to 240 L/min), T-13A, T-5A, T-16A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 2-Way Poppet Directional Main Stage with T-8A Pilot Cavity
- Capacity: 15 gpm to 60 gpm (60 L/min to 240 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-13A, T-5A, T-16A
- Valve function
- 2-Way Poppet Directional Main Stage with T-8A Pilot Cavity
- Series (frame sizes)
- 1 to 3
- Cavity
- T-13A, T-5A, T-16A
Product description
A 2-position, 2-way poppet main stage with a T-8A pilot cavity in its end. Fit a solenoid pilot and it becomes a high-flow solenoid directional valve; manual, air and hydraulic pilots fit the same cavity. The poppet seals with very low leakage and both ports take 5,000 psi (350 bar).
This version
- Controls flow from port 2 to port 1.
Sizes and cavities
Sun Hydraulics builds this valve in 3 versions:
- DFCB8 — series 1, T-13A cavity, 15 gpm (60 L/min)
- DFDB8 — series 2, T-5A cavity, 30 gpm (120 L/min)
- DFEB8 — series 3, T-16A cavity, 60 gpm (240 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)
Configuration options
The letters after the base model code choose these options (shown for DFCB8; a size may add or drop a choice):
- Check cracking pressure: D — 50 psi (3,5 bar)
- Seal material: N — Buna-N, V — Viton, E — EPDM
Selection notes
- The pilot cartridge is ordered separately; torque the main stage in first, then the pilot.
- The control 1-2 and control 2-1 versions differ in which direction the poppet controls.
Where it is used
High-flow on/off and load-holding functions switched by a small pilot valve.
Installation and seal kits
Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 1: Buna: 990310007, EPDM: 990310014, Viton: 990310006; series 2: Buna: 990203007, Viton: 990203006; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DFCB8DN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 15 gpm to 60 gpm (60 L/min to 240 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | D — 50 psi (3,5 bar) |
| Max leakage | 10 drops/min.@5000 psi (0,7 cc/min.@350 bar) |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm) |
| Seal kits | series 1: Buna: 990310007, EPDM: 990310014, Viton: 990310006; series 2: Buna: 990203007, Viton: 990203006; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006 |
| Weight | .40 lb (0,20 kg) to 1.10 lb (0,50 kg) |
Identification
| Parameter | Value |
|---|---|
| Valve function | 2-Way Poppet Directional Main Stage with T-8A Pilot Cavity |
| Series (frame sizes) | 1 to 3 |
| Cavity | T-13A, T-5A, T-16A |
Configuration
| Parameter | Value |
|---|---|
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Shipping & lead time
Sizes & part numbers
3 sizes- Sun Hydraulics part no.DFCB8
- Series
- 1
- Cavity
- T-13A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DFDB8
- Series
- 2
- Cavity
- T-5A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DFEB8
- Series
- 3
- Cavity
- T-16A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity used for?▾
Which sizes and versions does the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity come in?▾
How do I read the Sun Hydraulics model code DFCB8DN for the DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity?▾
What is the maximum operating pressure of the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity?▾
What flow capacity does the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity have by series?▾
Which seal materials and body finishes does the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity come with?▾
Which cavity does the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity fit?▾
Which seal kit fits the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity?▾
How is the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity installed?▾
Where is the Sun Hydraulics DFCB8, DFDB8, DFEB8 2-way poppet directional main stage with T-8A pilot cavity used?▾
Sun Hydraulics DFCB8, DFDB8, DFEB8 or DFCA8, DFDA8, DFEA8, DFFA8: what is the difference?▾
Do you stock the Sun Hydraulics DFCB8, DFDB8, DFEB8 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








