DEMCO Series NE-D Wafer Butterfly Valve, 2″, 200 psi

2″ (50 mm) DEMCO Series NE-D wafer butterfly valve, 200 psi drop-tight in an ASME Class 150 body. 2 Cameron part numbers: ductile iron body, nickel-plated ductile iron and 316 stainless steel discs, Buna-N seat.
Key features
- Series: NE-D
- Body configuration: Wafer
- ASME pressure class: ASME Class 150 (285 psi non-shock body rating)
- Series
- NE-D
- Body configuration
- Wafer
- Sanitary / FDA service
- no
- Size range
- 2″ (50 mm)
- ASME pressure class
- ASME Class 150 (285 psi non-shock body rating)
- Operating temperature range
- Buna-N: 0°F to +180°F (−18°C to +82°C)
Product description
The 2″ (50 mm) DEMCO Series NE-D wafer butterfly valve is the short-neck wafer with body notches for the lightweight flange patterns used on tank trucks and bulk-handling equipment; it also self-centres in ASME Class 125/150 flanges. This page lists the 2 factory configurations we can supply in this size, each identified by its Cameron part number, with the body, disc, stem and seat it was built with. Every one is rated for 200 psi drop-tight, bi-directional shut-off in an ASME Class 150 body.
Configurations available
| Part number | Body | Disc | Stem | Seat |
|---|---|---|---|---|
J022181-1115311 | Ductile iron | Nickel-plated ductile iron | 416 stainless steel | Buna-N |
J022181-1122311 | Ductile iron | 316 stainless steel | 316 stainless steel | Buna-N |
Trim is read from the part number using DEMCO's ordering table, and checked against the Cameron label for J022181-1115311. Confirm against the nameplate when we quote.
Reading the part number
Take J022181-1115311. J022181 is the DEMCO base number for a 2″ Series NE-D valve at 200 psi. The suffix is read left to right: body configuration (1 = wafer), body material (1 = ductile iron), stem (1 = 416 stainless steel), disc (5 = nickel-plated ductile iron) and seat (31 = Buna-N). The last character is the operator code.
Performance
- Body rating: ASME Class 150 (285 psi non-shock).
- Shut-off: 200 psi drop-tight, identical from either flow direction.
- Vacuum: sealed against 10 microns (29.9 in Hg).
- Buna-N seat: 0°F to +180°F (−18°C to +82°C).
- Flow coefficient: Cv 145 fully open.
Construction
- Hard-backed cartridge seat: the elastomer is bonded to a rigid backing ring and can be replaced in the field without special tools.
- Triple stem seal and a dry stem journal keep line fluid out of the stem bore.
- Floating disc centres itself in the seat; the stem is blowout-proof.
- Double-D upper stem and DEMCO top flange accept the full DEMCO actuation range.
- MSS SP-25 marking on every valve.
Installation
The NE-D wafer body is notched for lightweight transport flange patterns and also self-centres between ASME Class 125/150 flanges on through-bolts. A wafer valve is clamped between two flanges and is not rated for end-of-line service.
Operators
The DEMCO top flange takes the 10-position locking handle, worm-gear operator and Series DR pneumatic actuators. Confirm the operator supplied with each part number when we quote.
Supply
Supplied from surplus stock through our supply network. Quantity, unit condition and any documentation are confirmed on the quotation. Put the part number, quantity and delivery point on your RFQ. For the full Series NE-D range, including sizes and trims not listed here, see the DEMCO Series NE-D series page.
Identification
| Parameter | Value |
|---|---|
| Series | NE-D |
| Body configuration | Wafer |
| Sanitary / FDA service | no |
| Cameron part numbers | J022181-1115311, J022181-1122311 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2″ (50 mm) |
Performance
| Parameter | Value |
|---|---|
| ASME pressure class | ASME Class 150 (285 psi non-shock body rating) |
| Drop-tight shut-off ratings | 200 psi drop-tight, bi-directional |
| Operating temperature range | Buna-N: 0°F to +180°F (−18°C to +82°C) |
| Vacuum rating | 29.9 in Hg (sealed against 10 microns) |
| End-of-line service capable | no |
| Flow coefficient Cv (full open) | 145 |
| Actuation options | Lever handles, worm-gear operators, Series DR pneumatic actuators |
Compliance
| Parameter | Value |
|---|---|
| End-connection / flange standard | Lightweight flange patterns (transportation/bulk-handling) and ASME Class 125/150 flanges |
Construction
| Parameter | Value |
|---|---|
| Body material options | Ductile iron |
| Stem material options | 416 stainless steel, 316 stainless steel |
| Disc material options | Nickel-plated ductile iron, 316 stainless steel |
| Seat elastomer options | Buna-N |
Shipping & lead time
What is the 2″ DEMCO NE-D wafer butterfly valve rated 200 psi used for?▾
How do I read DEMCO part number J022181-1115311 on the 2″ NE-D wafer valve?▾
Which configurations of the 2″ DEMCO NE-D wafer butterfly valve can Indus supply?▾
What are the body, disc and seat materials of the 2″ DEMCO NE-D wafer butterfly valve?▾
What pressure does the 2″ DEMCO NE-D wafer butterfly valve hold?▾
What temperature range does the 2″ DEMCO NE-D wafer butterfly valve cover?▾
Which flange standard and marking apply to the 2″ DEMCO NE-D wafer butterfly valve?▾
Can the 2″ DEMCO NE-D wafer butterfly valve be used at the end of a line?▾
Which operators fit the 2″ DEMCO NE-D wafer butterfly valve?▾
2″ DEMCO NE-D or NE-I wafer butterfly valve: which one?▾
Where is the 2″ DEMCO NE-D wafer butterfly valve made and what lead time applies?▾
What is the lead time for the 2″ DEMCO NE-D wafer butterfly valve?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Oilfield & pressure control
DEMCO butterfly valve part numbers decoded: series, size, body, stem, disc and seat
A DEMCO butterfly valve number such as J022122-1215311 spells out the valve: series and size in the base, then body style, body, stem, disc and seat in the suffix. How to read one, and when to trust the nameplate instead.
5 min read
Oilfield & pressure control
Butterfly valves: wafer, lug or grooved, shut-off ratings and dead-end service
A butterfly valve is the cheapest, lightest way to isolate a large line — but the body style decides what it can do. A wafer valve is clamped between two flanges and cannot hold pressure with one side removed; a lug valve can, within limits the maker sets; a grooved valve joins grooved pipe without flanges at all. How the DEMCO NE-C, NE-I, NE-D and NF-C series and the Victaulic grooved valves differ, what their shut-off ratings mean, and how to choose the handle or gear — and where concentric, double offset and triple offset valves to API 609 take over.
8 min read





